127,905 used machines on RESALE, but how to find them? Machine Search
Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece
Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 525 mm, height 500 mm -Wall thickness: 25 mm -Grooves: 175 x 30 mm -Holes: Ø 25 mm -Dimensions: 500/525/H500 mm -Weight: 124 kg
AGFA / Siemens X-ray imaging workstation DX-D 500 (digital) with the following system components: Generator Siemens Polydoros IT 80 Tube Siemens SV 150/40/80 HC 0.6/1.0_Bj. 2018 Vertical tripod Siemens Vertix T Fa. Siemens 2x detector VARIAN 4343R CSi_43x43cm Workstation • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • T ...
Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm counters of axes are damaged ? manufacturer don?t supply spare parts Control:SIEMENS 840 C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Made in Germany
Key data: 500 mm, 400 mm, 300 mm
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
x-travel: 750 mm y-travel: 750 mm z-travel: 725 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische ...
Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DN-50-500 PPV -Stroke: 500mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars -Dimensions: 680/65/H100 mm -Weight: 4.3 kg
Control unit, control element, interface, contactor -Manufacturer: Jungheinrich, Contactor control unit from order picking forklift type: ECE 20 -Type: 5000 7894 -Voltage: 24 V -Dimensions: 150/100/H100 mm -Weight: 1.4 kg
Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree shart corner. (Dovrie) Available direct
Control, control part, interface -Manufacturer: Jungheinrich, control from electric truck ECE 20 -Type: PM 2402 L -Mat no.: 50020525 -Voltage: 24V -Number: 2x control unit available -Price per piece -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.
Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...
Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: Bernstain, Foot switch type F1-U1 UN -Voltage: 10A 500V-AC IP65 -Connector: 6-pin -Metal housing: with protective cover -Overall dimensions: 280/150/H760 mm -Weight: 3.3 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: double-winged, compartment width 30 cm -Width: 600mm -Depth: 500mm -Height: 1820mm -Doors: lockable, without lock -Number: 2x locker available (1x with 2 shelves) -Price per piece -Weight: 40kg / 42kg
Used stainless steel belt press made by Flottweg model B-FRU-500 made in 2010. Capacity 500-2000 kg/h. The press includes pulp pump, circulation pump, wash water screen, pressure pump, juiice pump, stationary juice screen, control panel, piping.
Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø90 x 30mm -Item No.: 858 762 65 -Heating power: 500 W -Voltage: 220 V -Dimensions: 230/160/H80 mm -Weight: 0.4 kg
Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg
Planetary stirrer Sinmag Model: SM2-500C sophisticated, robust technology ... Proven many times over! Mixer with simple manual operation Powerful 3-speed gearbox 1 stainless steel boiler 40 liters 1 flat stirrer 1 dough hook 1 broom Boiler Protective Grille / Encroachment Protection Floor-standing machine with boiler stroke DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug NEW Machine with 24 months warranty TOP quality and price in one machine! Your partner with the extra bit of service!
hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg
Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm
Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer
Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, valve amplifier, valve control, prop. amplifier -Manufacturer: Rexroth, Prop. Amplifier -Type: VT 5004 -PCB: VT 3002 -Dimensions: 200/60/H140 mm -Weight: 0.4 kg
Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.
Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication
Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel
Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: chuck size Ø 500 mm -Receptacle: short cone 8 (Ø 136-139 mm) -Hole circle: Ø 172 mm -Through hole: Ø 80 mm -Groove width: 20 mm -Weight: 86 kg
Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection ...
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes/laundry locker -Steel locker: double-doored, compartment width 30 cm -Width: 600 mm -Depth: 500 mm -Height: 1855 mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 38 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: three-winged, compartment width 30 cm -Width: 900mm -Depth: 500 mm -Height: 1840mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 56 kg
Key data: 2000
Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base
Key data: 510 mm, 510 mm, 510 mm
Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder
Door closer, floor door closer, locking body -Manufacturer: Geze, floor door closer closing body type TS 500 NV, unused Ovp -Article No.: 0672-CPR-0121 -Number: 11x door closers available -Price per piece -Dimensions: 300/90/H80 mm -Weight: 3 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet drawer cabinet sturdy design -2 drawers: layout/height see photos -Cabinet door: lockable -Number: 1x cabinet available -Dimensions: W x D x H 500/600/H 800 mm -Weight: 35 kg
Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg
Double hose reel, reel, hydraulic hose reel, hose reel -Manufacturer: Hans H. Meyer, double hose reel from electric forklift Still EFG 1.5/5004 -Type: 7-21 -Dimensions: 280/200/H280mm -Weight: 9 kg
One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW
Micrometer screw, outside micrometer screw, precision micrometer screw -Manufacturer: KS, Micrometer: Precision micrometer screw -Measuring range: 500-600 mm -Reading: 0.01 mm -Locking device -Standard: TGL 150 46 -other sizes: also available -Dimensions box: 880/545/H50 mm -Weight: 6.2 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet Schäfer, drawer cabinet sturdy design -1 drawer/ 2 borders: Layout/height see photos -Cabinet door: lockable -Quantity: 1 piece available -Dimensions: W x H x D 500/500/1000 mm -Weight: 29 kg
cutting width: max. 375 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw -------------------------------------------------- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to ...
Key data: 500 kN
Injection moulding machine Arburg 270 D 500-210 with control cabinet, functional, built in 1990, power 20kW, weight 1,850 kg, Clamping force 500 kn
From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---
door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV -Art.No.: 0672-CPR-0121 -Dimensions: 270/70/H65 mm -Weight: 2.8 kg
linear drive, linear gear, lifting gear, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, short-stroke linear slide -Manufacturer: Linear drive short-stroke linear slide -Type: 3 842 233 500 -Stroke: 35 mm -Dimensions: 180/60/H35 mm -Weight: 0.8 kg
Vernier caliper, caliper, vernier caliper -Manufacturer: Helios, caliper gauge with fine adjustment -Measuring range: 0-500 mm -Vernier: 0.05 mm -Dimensions: 655/230/H15 mm -Weight: 1.1 kg
conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: KJ, -Type: KA69 500B -Speed: 8.3 m/min -Belt width: 500 mm -Conveyor length: 11200 mm -Drive: Drum motor, see photo type plate -Transport dimensions: 11200/1170/H230 mm -Weight: kg
Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg
maximum number of results exceeded
please refine your search
