engel 500 t used for sale

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 230/80/H650 mm -Weight: 3.4 kg

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 615/120/H75 mm -Weight: 2.7 kg

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Column jib crane, overhead crane, workstation crane -Column jib crane: Lifting capacity 500 kg -Base plate: 755 x 755 mm -Reach: 4100 mm -Total height: 4,065 mm -Hook height: 2,790 mm -Main stroke: m/min -Fine stroke: m/min -Transport dimensions: 4370/1160/H755 mm -Empty weight: 980 kg

description: Here we offer used safety light barriers of the brand Leuze. These photocells are already installed in the original bracket of Leuze and these brackets are equipped with two sensors + counter mirror. After delivery / pickup, you have the right to return the photocells without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800, FC and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machine ...

Single-swing jaw crusher with an internal width of 500 mm x 350 mm. The lower gap is adjustable from approx. 30 to 80 mm. Throughput (depending on the selected gap width and the material to be crushed): Between 9 and 30 tons/h. The crusher ran smoothly until the removal and the scope of delivery includes 2 suitable, unused crushing jaws. Additional spare parts / wear parts are available for an extra charge.

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...

PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 280 kw. d.c. drive and starter (new 2019), Electric cabinet, CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offeres : checked for good working conditions OR reconditioned, installed power - used power in work: about 60-65% : 280, availability: ready-to-go

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm. (59.06), Power: 100 Hp 75 kw

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

Average throughput rate abt.500 kg/h depending on feeding rate 30 kW.drive, 400 V 50 Hz Granulating chamber mm.600 x700 Knives length 600 mm. Rotor length 600 mm. diam.500 mm. N.3 x 2 in line rotating knives N.2 still knives (micro-adjustable) Grid holes 12 mm (or on request) Extraction vent 1,5 Hp+ piping + cyclon + dust sleeves Manual hydraulic pump for hopper opening Water cooling system in the granulation body Electric cabinet User’s manuals drawings, CE compliance Soundproof cased

Hydraulic power unit for mobile clinching pliers or mobile former ECKOLD type HA 500 / 2Fabr. No. 737 / 783 Year of construction 1991Hydraulic power unit type HA 500 / 2Operating pressure 50 - 500 bar adjustableFlow rate 2.6 l/minTank capacity 16 litresEngine power (hydraulic) 3 kWNead power 380 Volts, 50 Hz.Control voltage 24 Volts, DC pressure line with screw coupling- With solenoid valve HAWE GS 2-2- mobile on 4 swivel castorsWeight without hydraulic oil 125 kggood condition; used

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: ab ...

UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die

Operating pressure: 500 bar, Year of construction 2019 Flow rate: 15 l/min, hot water, Drive: Deutz Diesel 15 kW, Operating hours: approx.: 195 h, Trailer incl. accessories, HD pistol + lance

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, total installed power 406 kw, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

was in operation for conveying cereals and salt (silo filling),, Screw diameter: 150 mm,, Emission height: approx. 3,000 mm., Dimensions / weight: LxWxH: 4.500x1.085x2.970mm

PELLIZZOLI HEAVY DUTY GRANULATOR, Heavy duty granulator for rubber and plastics, sturdy machine, very well constructed, 1.500 mm.wide rotor, Ø 800 mm - open rotor, powerful 132 kw drive, n.15 rotating new knives 50 mm.long + spare set, n.2 screens: holes 50 mm + 8 mm., machine prepared to be connected to a chiller to perform a thorough cooling, material sucking unit + dust sucking unit., This machine was new in 2005 but it has been working only 3 months on a pilot project., The machine is offered reconditoned, Complete with CE compliance, electrical drawings, manual., installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.500 mm. (59), conditions: fully reconditioned, type: heavy duty - open rotor for rubber and plastics

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

Pillar jib crane, indoor crane, workplace crane -Load capacity: 500 kg -with chain hoist: SWF type 50/F -Year of construction: 1980 -Main stroke: 4.5 m/min -Fine stroke: 0.75 m/min -Projection: 3000 mm -Total height: 3760 mm -Hook height: 2940 mm -Swivel range: 360° -Transport dimensions: 3490/1100/H1400 mm -Own weight: 748 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Ziehl-Abegg, axial fan axial fan suction fan -Type: ... 500-4-4ADsp -Power: 0.42 kW / 1360/1050 rpm -Fan: Ø 500 mm -Quantity: 1x fans available -Price per piece -Total dimensions: 860/850/H180 mm -Weight: 21 kg/pc.

Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle -Protection class: IP 54 -Bra ...

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

Key data: 1500 KG

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: black Box profile: 104/82 x 50 mm Truss Type: PST22.104LN Lowering for chipboard: 22 mm Agraffe: 3 HK (hook) Clear width: 2,200 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. outside marbled 4.500 liters UNI-DACH Measurement and Weight: Total Height: 2900 mm Cyl. Height: 2000 mm Diameter: 1750 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: - with manhole round DN 500 with hanger - with 2 cran eyes - with thread connection 2 x DN 25 and 1 x DN 65 - with CIP spray head Cylinder tank: - ladder hook - with sample valve - with level indicator with bar and scale - with temperature indicator analog - with thread connection DN 80 Lower bottom: - with conical bottom - with forward pulled outlet pipe with butterfly valve DN 50 - with 4 calotte feet height adjustable

MÖSCHLE Storage tanks outside marbled for wine, water, fruit juice, schnapps 11.500 liter UNI-NIED Measurement and Weight: Total Height: 3430 mm Length: 2350 mm Width: 1800 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection NW25 For level indicator with bar and scale With connection for zapf clape gr. 37 With connection DN 15 for sample valve Lower bottom: With flat bottom With outlet pipe connection NW50

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...

Expansion tanks Zilmet. 500 litres

Vickers hardness tester of the extra class Modular design - as stand alone hearing tester or as a fully automatic machine. cheapest fully automatic machine worldwide As a full automatic incl. - 6-fold turret - 5 MP camera - 2 lenses (2 more optional) - motorized XY table - Overview camera - first-class hardness testing software IMPRESSIONS - incl. automatic hardness course CHD, NHT, RHT - additional software - modules for 2D / 3D mapping, screw testing ISO898, edge finishing, etc. - motorized lifting spindle - Autofocus, auto brightness + contrast ... This is THE quality machine at a fair price request now without obligation!

White temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test room volume: 500 ltr. Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of construction: 1990 Condition: used Complete plant closure, large selection of mezzanine, pallet racks, shelve ...

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

CARRAGARM RACK NEW Data: H : approx. 416 cm D : approx. 137 cm L : approx. 402 cm Cantilever : approx. 120 cm Axial distance : 131 cm NEW GOODS immediately from stock. 500 kg load per arm 2250 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: 04 x stand, incl. stand approx. 416 cm made of IPE160. 12 x cantilever arms approx. 120 cm made of IPE 80 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pain ...

Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order

GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1997. The machine, designed for precision machining of workpieces with a maximum diameter of 500 mm, has two spindles (main spindle and sub-spindle) of high speed and power, which will improve even the most intensive machining. The installed GRUNDING CNC controller with colour screen and control panel also allows for cycles to control. The total weight of the machine is approximately 3000 kg. Technical specifications of the GILDEMEISTER NEF Plus 500 lathe - CNC control: GRUNDIG - maximum turning diameter (over bed): 500 mm - maximum turning diameter (over saddle): 290 mm - maximum turning length: 1500 mm - main spindle rotational speed range: 80-2800 rpm - main spindle passage: 70 mm - main spindle drive power: 11 kW - maximum sub-spindle rotational speed: 5000 rpm - sub-spindle drive power: 7.5 kW - total power require ...

Key data: 4000 mm, 5000 mm

Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the  ...

Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm