engel 300 used for sale

Engel Victory 310-60 Electric Closing unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions and weight Net weight with control cabinet [t] 5.7 Dimensions (length x width x height) [m] 4.7 x 1.4 x 2.7 Number of heating zones: 4 Hydraulic core 2x; 1x air valve; EUROMAP 12 interface

Producer Engel Type Victory 750 / 180 tech Year 2004 Clamping unit Clamping force 180 ton Opening stroke 750 mm Distance between tie bars 960 x830 mm Mould height min. 500 mm Opening width 1250 mm Injection unit Screw diameter 45 mm Injection volume 318 cm³ Shot weight 302 g Injection pressure 1769/2360 bar Measurements and weight Machine weight 13500 kg Robot Producer Wittman Type W743 Year 2009

Injection weight: 198 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 410x460 Size of plates: 650x600 Min mold height: 150 Control type: LC 200 Tongue: English,Other Installed power: 18 Working hours: 36000 Libra: 4400 Dimensions: 4.7 x 1.3 Feed hopper: NO Robot socket: Yes Air valve: Yes

Injection weight: 50 g Closing force: 500 kN State: Used Screw diameter: 25 Injection pressure: 2400 Column spacing: 320x370 Size of plates: 520x470 Min mold height: 150 Control type: LC 200 Tongue: English,Other Installed power: 14 Working hours: 37500 Libra: 3400 Dimensions: 3.8 x 1.3 Feed hopper: NO Robot socket: Yes Air valve: Yes

Key data: 1000 kN, 198 g/PS, 40 mm

Angel E-max 440-100 (216) General information Item number: (216 MB) Availability: In stock Year of construction: 2009 Brand: Angel Specifications Spray weight: 198 g Clamping force: 1,000 kN Stand: Used Screw diameter: 40 mm Spray pressure: 2000 bar Tie bar spacing: 410 x 460 mm Clamping plate size: 650 x 600 mm Tool installation height min.: 150 mm Control: LC 200 Language: English,Swedish Power: 18 kW Operating hours: 36000 h Weight: 4400 kg Dimensions: 4.7 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Key data: 500 kN, 50 g/PS, 25 mm

Angel E-Max 200-50 (215) General information SKU: (215) Availability: In stock Year of construction: 2008 Brand: Angel Specifications Spray weight: 50 g Clamping force: 500 kN Stand: Used Screw diameter: 25 mm Injection pressure: 2400 bar Tie bar spacing: 320 x 370 mm Clamping plate size: 520 x 470 mm Tool installation height min.: 150 mm Control: LC 200 Language: English/ Swedish Power: 14 kW Hours: 37500 h Weight: 3400 kg Dimensions: 3.8 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Clamping force 150 ton

Injection unit Screw diameter: 45 mm Calculated injection volume: 319 cm3 Pressure on the material: 1520 bars Closing unit Closing force: 1250 kN Dimensions of the trays: 740 x 700 mm General Heating power: 20 kW Weight: 9000 kg Other Equipment : Commissioned: 1999 Number of hours: 46241 h Tonnage: 125

Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg

ENGEL 2k 200 ton year 2009 x 2 units. Used for handles of toothbrush

Key data: 2200 kN, 40 mm

Injection moulding machine ENGEL VICTORY VC 650-150 Tech Stock No.: 503440 Manufacturer: ENGEL Type: VC 650-150 Tech Control: CC100 Year of construction: 2005 Hours: 92467 h We are pleased to introduce you to our used ENGEL VICTORY VC 650-150 Tech injection moulding machine. This high-quality machine has a 40mm screw and a clamping force of 1500 kN. Perfect for precision injection molding in a wide range of applications. Please note the increased minimum installation height of 395mm. Technical Data Closing Page Clamping force: 1500 kN Panel size h x v: 750 x 750 mm Min. installation height: 395 mm Plate spacing max.: 995 mm Aperture travel: 600 mm Ejector stroke: 150 mm Ejection force: 61 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 1800 kg Technical Data Spray Side Screw diameter: 40 mm Displacement: 251 ccm Injection ...

Key data: 2200 kN, 535 g/PS, 55 mm

Injection moulding machine ENGEL Victory 1050-220 TECH Stock No.: 503439 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of construction: 2006 Hours: 92465 h Technical Data Closing Page Clamping force: 2200 kN Plate size h x w: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Aperture travel: 755 mm Ejector stroke: 180 mm Ejection force: 80 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Auger length: 20 l/d Auger stroke: 200 mm Screw speed: 230 min Plasticizing Current: 55 g/s PS Outdoor injection flow: 255 g/s hp Number of heating zones: 5 Nozzle travel: 350 mm Dimensions & Weight Machine dimensions LxWxH: 6.2m x 1.7m x 2.2m Total Weight: 12900KG Equipment CEE socket 16A Compact Flash  ...

This Engel ES 650/150 HL Injection moulding machine was manufactured in the year 2001 and has 17798 hours. It is equipped with an Engel EC 100 control unit. The machine has a clamping force of 2000 kN and a screw diameter of 45 mm. Includes a Robot ERC 43 /2-E.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2017 in Austria and has 50249 production hours. It is equipped with a Engel CC300 control unit. The machine is all-electric and energy efficient. It has fast, dynamic, and highly precise movements through a five-point toggle lever clamping system with low friction platen guidance on precision linear bearings. The machine is still at the production and can be checked upon request. Full service documentation and manuals.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2015 in Austria and has 53893 production hours. It is controlled by an ENGEL CC300 control unit. The machine has a clamping force of 3800 kN.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2019 in Austria and has 11781 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 2 units are available.

Key data: 700 kN, 139 g/PS, 35 mm

Year of construction: 2002 Clamping unit - Clamping force: 700 kN - Tie bar width: tie-barless - Tool installation height 250/ 700 Injection unit - Shot weight (HP): 139 g - Screw diameter: 35 mm Pump running time - approx. 81,042 h Remark: - Dispensing without sprue picker and external Peripherals - VT card 2 defective General - 4 core pulls

Engel Injection Moulding Machine e-Cap 3440/420 T. Consider this machine had a new list of 447k in 2013 – see attached. Today new price is around 650k. Working hours is only 18384. Machine from 2012 and still in production Clamp force to/ kN 420/4200 Opening force kN 420 Opening stroke mm 700 Mold height max. mm 750 Mold height min. mm 350 Mould fixing platens h x v mm 1350 x 1350 Tie bar distance hor. x vert. mm 920 x 920 Ejector stroke mm 220 Ejector force forward / return kN 120 mold weight, max on moving platen/center of gravity1 kg/mm 6200 / 315 Dry operation time sec @ imm 2.1 @ 600

Key data: 2600 kN

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Key data: 2600 kN

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 26,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 26,000 in automatic mode Total number of operating hours: 30,323 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Key data: 1800 kN

Engel Victory 1060/180 Ecodrive / hybrid machine / operating hours: approx. 11,000 in automatic mode Year of construction: 2019 Injection unit: Screw diameter: 55 mm Injection weight: approx. 495 g Spray pressure: 2000 bar Dosing volume: 523 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 11,000 in automatic mode Total number of operating hours: 16,350 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Proportional ...

Key data: 1800 kN

Engel Victory 200H/60W/180 combi / production line with the robot Engel Viper 20 Year of construction: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: 2K machine with the original robot Engel Viper 20 Tie-bar-less machine, hybrid: energy-saving, high-revving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Hydraulic Core Pull x 6 Hot runner control x 36 Reinforced Injection Units - Bimetal The second injection unit is angled, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main Motors - 2 x Servo Motor Controlled with Inverter Proport ...

Key data: 1200 kN

Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel Del ...

Key data: 1100 kN

Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...

Key data: 1000 kN

Engel Insert 80V/80V/100 2F/2-K Tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared Protective Curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine was regularly serviced by the authorized service Engel in Germany Metrics: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started by our serv ...

Key data: 1000 kN

Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...

Key data: 800 kN

Engel e-victory 170/80 Ecodrive / production line with the robot Engel Viper 20 / hybrid machine Year of construction: 2017 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 22,581 h Euromap 67 Robot Interface Air Valves Hydraulic core pull x 2 Control with hot runners Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Parallel Movements  ...

Key data: 800 kN

Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...

This ENGEL E Victory 740/160 injection moulding machine was manufactured in 2011, featuring advanced handling capabilities. Noteworthy for its efficiency and reliability, this machine is a staple for producers seeking precision and durability in their manufacturing processes. The ENGEL E Victory 740/160 stands out for its robust construction and ease of maintenance, making it a valuable asset for any production line. Consider the ENGEL E Victory 740/160 machine we have for sale as a strategic addition to your operations. For more details, please contact us to explore this opportunity further.

This injection moulding machine, manufactured in 1999, has a robust design, weighing 53 tons, with a closing force of 11000 Kn. It includes hydraulic closing, M24 clamping threads, an ENGEL robot for automation, and a swivel mechanism for enhanced versatility, making it ideal for efficient, large-scale production. Reach out to us for further details on this ENGEL 1100 T injection moulding machine.

Description: operating hours: approx. 33489 hrs. 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1050 mm min. mould thickness: 300 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 Tonnen production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1250 mm min. mould thickness: 500 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW injection valve missing  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: Serial number: 24904, Own weight: 21,000 kg Equipment: Tie-bar-less, including rail guide underneath INFO: Device can be dismantled and is available at short notice Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 5,000 x 2,680 x 2,800 mm, weight approx.: 21.000 kg

Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the  ...

Description: Serial number: 46984, weight: 10,000 kg Clamping unit: Mold height min. 795 mm, max. 1,500 mm, opening stroke: 1,205 mm, piston diameter: 125 mm, rod diameter: 90 mm, number of cylinders: 1 Clamping force max. stroke: 1,200 mm, piston diameter: 600 mm, number of cylinders: 1, flow rate pumps 390 l/min, speed: 17 mm/s, ejector: stroke 250 mm, piston diameter: 85 mm, rod diameter: 63 mm, number of cylinders: 1 Equipment: Tie-bar-less Attention: the lot only includes the injection molding machine, other peripherals such as robot arm, etc., as shown in the photo, are not included in the lot, but including staircase platform INFO: Production must be stopped to remove the equipment, so it would be preferable to dismantle the system during the interruption in summer (end of July, beginning of August). Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 10,331 x 2 ...

Description: Serial number: 42169, Own weight: 7,000 kg Injection unit: Screw diameter: 80 mm, metering stroke: 310 mm, max. stroke volume: 1,558 cm³, screw speed: 183 rpm, standard screw length: 20 L/D, plasticizing capacity: 90 g/s, injection flow: 478 cm³/s, specific injection pressure: 1,400 bar, specific injection pressure increased: 1. 640 bar, nozzle stroke: 650 mm, nozzle pressing force: 110 kN, heating power: 34 kW, number of heating zones including nozzle: 5, pump drive power: 55 kW, oil filling main tank: 1,000 l, oil filling suction tank: 850 l, weight of injection unit: 7 t Clamping unit: Clamping force 6,000 kN, opening force: 300 kN, moving cylinder force: 150 kN, opening stroke: 1,200 mm, mold installation height min. 800 mm, platen distance max. 2,000 mm, platen size HOR.X.WERT. 1,580 x 1,300 mm, ejector stroke: 250 mm, ejector force: 110 kN, weight of clamping unit: 4 ...

Description: Machine number: 44575 Spindle diameter 25 mm Stroke 120 mm Spindle speed 380 rpm Max. screw torque 300 nm Max. injection volume 127.6 cm³/s Max. stroke volume 58,9 cm³ Max. injection pressure 2400 bar Max. injection power 42 kW Nozzle stroke 600 mm Nozzle pressure force 14 kN Installed heating power 6.8 kW Closing force 1000 kN Opening stroke 420 mm Mould installation height max. 420 mm, min. 150 mm Ejector force 23 kN Ejector stroke 130 mm Increased clamping plate 740 x 700 mm Width of ejector shaft 470 mm Dry running 1.6 s ENGEL CC 100 control system, 1 pneumatic core pull Tool heating circuits 8 Internal pressure switch KISTLER Nominal voltage : 3x400 + N+ PE /50 Hz Switching load : 95 Kw Rated current : 145 A Voltage control : 230 v AC / 24v DC Approx. Onsite Dimension. (l x w x h): 2,900 x 1,900 x 1,600 mm, weight approx.: 9,500 kg

B&A REF: 9017 TON: 180 SHOT WEIGHT: 360 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 760 X 760MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 600MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 150MM CONTROLS: CC 200 AIR VALVES: 1 HEATING CAPACITY: 15.3KW ROBOT INTERFACE: EUROMAP 67

Description: Clamping force: 1,100 kN screw diameter 35 mm incl. discharge conveyor, Engel ERC 23/2-F handling robot Internal number: E 110/1 M2332 SN: 163486, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 7,400 kg

Injection molding machine: clamping force: 5000kN, opening stroke: 1109mm, max. mold weight per plate/total: 5300kg/10600kg, drying time: 4.15s. Injection units: Unit 1: screw diameter: 90mm, injection flow: 623cm³/s, max. injection pressure: 2000bar. Unit 2: Screw diameter: 50mm, injection flow: 295cm³/s, max. injection pressure: 2000bar. Weight (without oil): Clamping unit: 33350 kg, injection unit: 9000 kg. ENGEL Viper 20 robot: max. manipulation weight: 17kg, max. vertical workpiece size: 600mm, travel X/Y/Z: 700mm/1300mm/3320mm. Total height of robot and machine: 4250mm, compact C-axis: pneumatic, torque: 30Nm, range: 0°-90°. Documentation available.

MOOG valve for injection moulding machines ENGEL

Control CC 100 for ENGEL injection moulding machines

Inverter for ENGEL robots Acopos Multi PO 220 Acopos Multi CO160

The KEBA keypad HT511-221/ENGEL/50200/19 - 2-stage enabling button - comes from an ENGEL ERC 34-1-E Handling from 2007. The serial number is 50200-01062. The device is ready for connection with a coupling plug.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage enabling button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02216. The device is ready for connection with coupling plug incl. soft case.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage approval button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02213. The device is ready for connection with coupling plug incl. soft case.

Servo motor, permanent magnet motor GE FANUC MODEL 10S/3000 A06B-0317-B072/7000 3000 rpm 145 V 3AC shaft diameter: Ø 35 mm shaft length: 75 mm flange: Ø 104 / 175 x 175 mm bolt circle diameter: Ø 200 mm hole diameter: Ø 14,5 mm New ! Dimensions ( servo motor ): 365 x 175 x 210 mm Dimensions ( original box ): 450 x 230 x 270 mm

Pneumatic cylinders, standard cylinder FESTO DNC-32-300-PPV-A 163304 1922622 stroke: 300 mm rod diameter Ø 12 mm New ! Dimensions: 450 x 50 x 45 mm