engel 300 used for sale

No. 4896: 1 gebr. Vertical milling head Fabr. COLLET + ENGELHARD, type BN 100 ( BFfb 85 / 110 ),

ENGEL VC200/50 TEHC PRO -Clamping force : 50 ton -Screw diameter : 25mm -Manufactured year : 2009 x 1 unit & 2010 x 3 untis

ENGEL two shot (2k) 2300 ton injection molding machine -Model : DUO 23050H/11050M/2300 COMBI -Manufactured year : 2009

Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable

Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021

clamping force: 1.300 kN injection volume: 106 / 43 cm³ screw diameter: 30 / 25 mm platen size: 850 x 750 mm daylight between platens - max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive  ...

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive  ...

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

Belt feeder Engel, model FB100 2500LX850GB STD, SN: 2206369. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pa ...

Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021

Year of manufacture: 2004 closing force: 500 t Columnless machine inspection possible video available top condition

Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658

Capacity 700 tones Distance between columns 8080cantimeter

Clamping force 120 tons. Ecodrive drive system -significant energy savings compared to a traditional drive. ! the control needs repair: an error occurs when the machine is turned on

ENGEL VICTORY 330/110 Tech Injection moulding machine Year manufactured: 2001 Photos attached

ENGEL DUO7050/500 (500 ton & 70mm screw)

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (Z): 1.400 mm - Stroke (Y): 800 mm - Stroke (X): 400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

Engel Injection Moulding Machine With Robot Machine is in good working condition

Engel Victory 3550/500 tech Injection Moulding Machine Machine is without column Robot and dryer are not included in the price CC200 control system Number of working hour : 31 000

Injection moulding machine Manufacturer: Engel Model: ES 330 HL Year of manufacture: 2000 Capacity: 90 Tn Working hours: 50290 h

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm

Manufacturer: Engel Model: 100T / 310 E MOTION Year of manufacture: 2004 Capacity: 100 Tn

Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 bars Injectable volume: 3720 cm3 Lamination: 183 g/s Dosing stroke: 430 mm

INJECTION UNIT Screw diameter: 45 mm Pressure on the material: 2400 bars CLOSING UNIT Closing force: 1800 kN Mold thickness Mini / Max: 250/600 mm Passage between columns: 580 x 580 mm Tray size: 780 x 780 mm With 1 hydraulic unit

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw

Control Type: CC200 Screw length: 20D Closing force: 40 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm

Used machine in good condition. Available for immediate delivery. - Air Valves: 1 - Screw diameter: 50 mm - Shot weight max: 353 g - Injection rate: 217 cm?/s - Injection pressure: 1.430 bar - Injection volume: 343 cm? - Platen size (h x v): 820 x 750 mm - Ejector force: 1750 kN - Core pulls: 1 - Power: installed max: 15,3 + 30 kW - Operating hours: 0 - Dimensions (long x wide x high): 5.750 x 1.680 x 2.190 mm - Weight: 11.500 kg

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 mm min./ max. mold height [mm] min 350 max 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 min./ max. mold height [mm] 350 - 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Screw diameter 30mm Spray weight 88g Spray pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of clamping plates 550x430mm Controller CC90 (Norwegian language) Weight 3000kg Dimensions 3,51x1,22x1,90m Heating capacity 6.9 kW Total power 21,9kW

clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 104 g - Injection rate: 111 cm?/s - Injection pressure: 2.400 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Clamping force: 1.600 kN - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm - Distance between tie-bars h: 550 mm - Distance between tie-bars v: 550 mm - Platen size h: 750 mm - Platen size v: 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Power: installed max: 30 kW - Operating hours: 28.140 - Dimensions (long x wide x high): 5.800 x 1.700 x 2.400 mm - Weight: 9.500 kg

ENGEL E-DUO 1340/700 (700 ton & 60mm screw) injection molding machine

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 200/50 Focus (150) without funnel General information Item number: 150 Availability: In stock Year of construction: 2007 Brand: Engel Specifications Spray weight: 89 g Clamping force: 500 kN Screw diameter: 30 mm Spray pressure: 1451(2205) bar Spar spacing: Tie barless Clamping plate size: 450 x 500 mm Control: EC 200 Language: German Power: 31 kW Operating hours: 79044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m Funnel: No Core train: Yes

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 230 Injection pressure [bar] 2022 Dimensions and weight Net weight with control cabinet [t] 6.8 Dimensions (length x width x height) [m] 4.82 x 1.48 x 2.01 Closing unit Clamping force [kN] 1200 Dimensions of mounting plates (hxv) [mm] 740x680