engel 25 used for sale

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROTIG 250 -Welding power: max. 250 A, see nameplate -Accessories: incl. hose package, ground cable see photos -Dimension: 1180/675/H900 mm -Weight: 264 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fasteners: Hanger screws fully assembled 1375 pieces -Type: M10 x 250 SW 7 -Material: A2 stainless steel -Price/tax: complete -Transport dimensions: 1200/800/H300 mm -Weight: 239 kg

Description: Change Gears/Gears: This 32-piece steel change gear set consists of: Gears with the number of teeth from 20s - 149s Approx. Onsite Dimension. (l x w x h): 400 x 250 x 200 mm, weight approx.: 50 kg

Tetra Pak TBA 19 250 sl with Straw Applicator, consists of: Tetra Pak TBA 19 250 sl with Straw Applicator TSA Tubex 9001 To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers. Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Stainless steel screw conveyor with 250 mm diameter and 2.100 mm conveying length (measurement taken between center inlet and center outlet), inlet and outlet 270 mm Ø each, incl. drive via gearbox and jaw clutch.

130 lfm shelf shepherd type R3000 Used goods, as good as new, see pictures Height 2.5 m Depth 80 cm Load/compartment 250 kg Field width approx.128 cm Negotiation price: € 14,660,-- net from stock Offer consists of: 101 pcs. stand or frame, 2.5 m, galvanized 600 pcs shelves, 250 kg load/compartment, galvanized 34 St. Cross Associations for Stiffening. 6 levels per field (several are of course possible at an extra cost) Also available with a field width of 100 cm! Other compilations possible. Heights 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms ...

30 lfm shelf shepherd type R3000 Used goods, as good as new, see pictures Height 2.5 m Depth 80 cm Load/compartment 250 kg Field width approx.128 cm Negotiation price: € 3,520,-- net from stock Offer consists of: 24 pcs stand or frame, 2.5 m, galvanized 144 pcs shelves, 250 kg load/compartment, galvanized 9 St. Cross Associations for Stiffening. 6 levels per field (several are of course possible at an extra cost) Also available with a field width of 100 cm! Other compilations possible. Heights 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and ...

Coolers, axial, garner GFH082B / 2 x 6 Manufacturer: Güntner GFH082B / 2 x 6 medium: water glycol 70 / 30% Medium temperature: 90º occurs C.Austritt 70 ºc. Cooling capacity: 2500kW air temperature: 30ºc. Fans: 12 pieces, 2, 2 kW, 400V, 50 Hz, 3 wire Connection: DN 100, exit is 2 x 2 x DN 100 Dimensions: Lxwxh = 12. 000x2300x1450mm Weight: 2550kg Sound pressure level: 58 DB (a) distance of 10 m, year built: 2000 Condition: Good, tightness and fans Jenbacher, dry tested cooler, dry air cooler, not cooler, drycooler, glycol coolant

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Attachment: eccentric screw pump Manufacturer: Allweiler Type: BN 2-24 Machine number: 160450 Year of construction: 2003 Output: 50-2500 l / h Speed: 35-360 1/min Pressure: 1-15 BAR Engine: Nord, 3 kW Voltage: 400 V Connection suction side: DN 65 Port side: DN 50 Length: 1500 mm Other: with ventilation F100 Condition: used, ready

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.

Planetary mixer with whirler tool, 2 mixing stars, 4 mixing shovels and scraper / discharging shovel. Maximum capacity per batch: 2.250 l. / 3.600 kg, hardened concrete output per batch: 1.500 l., processable grain sizes: 0 - 65 mm, with dual outlet (operated hydraulically). Incl. main drive 75 kW and many spare parts.

Manufacturer: DOMINO Type: DGM-1 Year construction: 2001 ; ready for use

Hilge GmbH (Groupe Grundfos) HYGIANA II/4 BLOC 25 m3/h

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 1.810 x 1.610 mm - Screw diameter: 140 mm - Shot weight max: 8.630 (PE) g - Shot weight max: 10.880 (PS) g - Injection rate: 1.510 cm?/s - Injection volume: 11.820 cm? - Screw speed: 90 / 90 / 75 rpm - Screw L/D ratio: n/a - Nozzle stroke / force max.: 600 mm / kN - Nozzle stroke max: 350 mm - Clamping force: 25.000 kN - Mould opening stroke max: 2.700 mm - Mould height max: 1.700 mm - Mould height min: 900 mm - Daylight between platens max: 3.600 mm - Platen size (h x v): 2.480 x 2.250 mm - Cascades / Sequential valve gates: n/a - Heating zones: n/a - Ejector force: 60 kN - Control: HICOM-5000 - Core pulls: n/a - Oil tank capacity: 3.800 l - Operating hours: 635 - Power: installed max: 85 + 55 +55 +55 +11 kW - Dimensions (long x wide x ...

included Sepro, with accumulator - Distance between tie-bars (h x v): 630 x 630 mm - Air Valves: 1 - Screw diameter: 60 mm - Shot weight max: 694 g - Injection pressure: 2.144 bar - Injection volume: 763 cm? - Clamping force: 1.750 kN - Mould height min: 295 mm - Daylight between platens max: 750 mm - Heating zones: 4 - Platen size (h x v): 1.035 x 970 mm - Ejector force: 0 kN - Control: IQT6 - Core pulls: 1 - Operating hours: 82.000 - Power: installed max: 55 + 29,3 kW - Weight: 11.200 kg - Dimensions (long x wide x high): 6.900 x 2.000 x 2.600 mm

Clamping Force: 300 ton // Shot Weight (Max): 772 g

Thyristor -Type: S8070W -Price: complete -Number: approx. 250 pieces -Dimensions: 175/130/H215 mm

Thyristor -Type: S6070W -Price: complete -Number: 250 pieces -Dimensions: 175/130/H215 mm -Weight: 1.3 kg

moving point, moving center point, moving Morse taper, moving -Center point: 75/250 mm -barrel tip: shaft-mounted -Recording: MK7 -Weight: 34 kg

Working hours : 250 Hyundai Wia L 210LA CNC lathe with 250 working hours! Turning length : 530 mm Turning diameter : 350 mm

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 65 mm - Clamping force: 2.500 kN - Shot weight max: 1.072 g - Injection rate: 3.100 cm?/s - Injection volume: 1.128 cm? - Mould height max: 650 mm - Mould height min: 200 mm - Platen size (h x v): 910 x 840 mm - Heating zones: 4+1 - Distance between tie-bars (h x v): 630 x 560 mm - Control: 0 - Oil tank capacity: 800 l - Operating hours: 0 - Weight: 14.500 kg - Dimensions (long x wide x high): 7.395 x 2.215 x 1.920 mm

Glass line consists of following machines: Bulk glass depalletiser BERCHI Rinser WAP with 60 grippers New bottle detector KRONES Lineatronic Pressure filler SIMONAZZI 80 fillers Crowner @ 20 Screw capper @ 10 Premix SIMONAZZI Cluster machine SMI Traypacker SMI Palletiser BERCHI Pallet wrapper Bottle conveyors Pack conveyors Pallet transport

Boom 5 +6 m 2 pcs available ABUS GM 3 chain hoist, complete with underlays

Batch intensive mixer with a maximum batch capacity of 1,250 l. / 3,600 kg, equipped with: Drum drive 22.0 kW (drum speed: 8.4 rpm), mixing star drives 2 x 22.0 kW (mixing star speed: 39 rpm), hydraulics power pack for discharge gate 3.0 kW, lubrication pumps 2 x 0.18 kW. Previous use: Production of ready-mixed concrete.

Piston compressor of the professional company J. P. Sauer & Sohn GmbH Product No.: 300L-100 Year of Build: 1998 1470 rpm Direction of rotation: right Capacity: 255 m3 / h Pressure: 40 bar Power requirement: 55 kW Mileage: 21.475 hours .

Round Table, Round Dividing Table, Circular Dividing Table WMW Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 25 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 26 mm ( U-shape ) used, checked! Dimensions: 410 x 370 x 100 mm

Compact cylinder, pneumatic cylinder, double-acting, 2 pieces SMC CDQ2B32-25DMZ Piston diameter: Ø 32 mm stroke: 25 mm rod diameter: Ø 16 mm rod thread: M14 x 1,5, Length: 22mm max. 1.0MPa (10 bar) New ! Dimensions: 87 x 45 x 50 mm

Control Panel, Machine Control Panel CMB TD35/250 2x Handwheel: PEPPERL+FUCHS Type TRD-J500-RZ Part No.: 15284 spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 485 x 400 x 125 mm

For sale are 0.25 KW electric motors from Bonfiglioli. They are ideal for self-construction, conveyor belts and shredder drives. The motors have an output speed of 1330 rpm. The gearboxes have an output speed of 18 rpm. Gear Ratio P71. Engine name: BS 71 A 4 COD: W8K15020013 Shipping is done with parcel service.

Control panel, machine control panel, with swivel arm NOMOCO VSR5-230-CNC7 Control / Display: BWO type CNC 920 < -br />Monitor: 215 x 165 mm Control housing: RITTAL A 1558 Dimensions ( with handles ): 950 x 630 x 250 mm Swivel arm: Length: approx. 2000 mm cross-section: 160 x 80 mm mounting flange: 175 x 165 mm used, tested ! Dimensions ( transport ): 1250 x 1200 x 1350 mm

Control Panel, Machine Control Panel CMB TD35/250 Type NUM 750 Monitor: NUM TFT8,4 35008995 Monitor is defective spare part for lathe CMB TD35/250 !, among others used, checked ! Dimensions: 485 x 400 x 125 mm

Control Panel, Machine Control Panel CMB TD35/250 Display Speed: 0 - 6000 rpm Display Current: 0 - 60 A instrument size: 92 x 92 mm spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions: 320 x 210 x 55 mm

Rotary encoders, rotary encoders, pulse generators, encoders AMK CMB TD35/250 Pulse generator: HP HEDS-6310 Shaft: Ø 15 mm Wavelength: 22 mm Toothed pulley: Ø 96 mm, width: 15 mm foot: 120 x 45 mm spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions ( without cable ): 270 x 120 x 140 mm

Energy chain CMB TD35/250 Length: 700 mm Cross section ( inside ): 45 x 25 mm Cross section ( outside ): 60 x 45 mm Material: stainless steel, plastic, aluminum ( flanges ) spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions (packaging): 270 x 270 x 65 mm

Energy chain, cable carrier, closed CMB TD35/250 Length: 1400 mm cross-section ( inside ): 42 x 40 mm cross-section ( outside ): 60 x 53 mm Material: stainless steel, plastic, aluminum ( flanges ) spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions (packaging): 380 x 340 x 65 mm

Switch-disconnector, cam switch, main switch EAW 139.022.315 TGL 35794 160 / 250 A 500 V AC used, tested ! Dimensions: 220 x 180 x 250 mm

Grinding spindle CZ IBC 80 250 T n max: 16000 rpm diameter: Ø 80 mm sleeve length: 222 mm tool holder: Ø 10 mm, length: 10 mm female thread: M5 x 0.8, depth: 25 mm tool holder (screw-on): Ø 10 mm, length: 15 mm female thread: M6 x 1.0, depth: 20 mm flat pulley: Ø 40 mm, width: 60 mm, barrel-shaped used, tested ! Dimensions: 383 x 80 x 80 mm

Gas spring HAHN G10 23 250 1 600 AU19 AB11 600N 12/05 hole diameter: 8 mm Dimensions: 620 x 23 mm

- Producer Cefla - Type TN 2250 - Length 2.250 mm - Belt with 1.360 mm - Overall width 1.600 mm - Year of construction 2008 - FU-Regelung für Feed speed - Feed speed ~ 2 - 8 m/min - frequency converter on site - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Commodity code 8428330 - Weight 270 kg

Hydraulic motor VICKERS 2520V12A8 shaft diameter: Ø 22 mm Flange diameter ( inside ): 102 mm bolt circle diameter: Ø 115 mm New ! Dimensions: 310 x 175 x 160 mm

Ball bushing linear guide, open linear bearing unit INA KGB0 2558 PP ( KGB02558PP ) Diameter: Ø 25 mm Base: 81 x 29 mm hole spacing: 68 mm Material ( housing ): Aluminum New ! Dimensions: 81 x 58 x 54 mm

Pneumatic tensioner GENUS TECH MPL 25EEP ( MPL25EEP ) 22885 cylinder CNOMO trinorm-2 PCN 50 A 50 DI ( PCN50A50DI ) 43760063 max 10 bar New ! Dimensions: 370 x 250 (275) x 65 mm

Shaft coupling, with overload device CENTA DRIVES, MIKIPULLEY Japan CENTAFLEX Size 250 Hollow shaft diameter: Ø 40 / 60 mm installation length: 270 mm New ! Dimensions: 370 x 370 x 270 mm

Round tour with a trolley DRECKSHAGE TAG-16-S 1 Trolley: 84 x 53 mm Round guide: Ø 16 x 250 mm used, tested ! Dimensions: 250 x 465 x 42 mm

Hydraulic power pack with tank, universal power unit IMAV HYDRAULIK GmbH AKD-26-250/4 HS 85467 p: approx. 150 bar Main engine: VEM KMER 132 M4 ACP 7,7,5 kW 1435 rpm 380 / 660 V 3AC 50 Hz auxiliary motor: VEM KMERB 80 G4 / 133 0,75 kW 1380 rpm 220 / 380 V 3AC 50 Hz tank: approx. 250 l used, tested ! Dimensions: 1300 x 750 x 1710 mm