engel 25 used for sale

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Cda3icllsq Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

General SKU336T902 LocationBarneveld MakeEngelsmann TypeM3.C.187/3/1.4541 Mach.No.32516 Main Features MaterialStainless steel Motor1.5 KW Length700 mm Specified Features - Sorting sieve Sorting sievecheck Sieve surface1,9 m² Number of sieve decks:2 Number of fractions:3 Sieve sizes700x680 mm Sieve perforation5,5-1,5 mm With covercheck InletDia: 150 mm OutletDia: 140 mm, Dia: 110 mm (2x) Unbalance drivecheck Motor1.5 kW, 220-240/380-420 Volt, 940 rpm Variable speed drivecheck MaterialStainless steel 1.4541 (321) Information Year of construction2007 Mounted on mild steel framecheck Floorspace4,5x1,9 m Total height1,6 m Weight2100 kgSorting sievesEngelsmannSieves > Sorting sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU336T901 LocationBarneveld MakeJ. Engelsmann AG TypeM3.C.187/3-1.4541 Mach.No.30059 Main Features MaterialStainless steel Motor1.5 KW Length700 mm Specified Features - Sorting sieve Sorting sievecheck Sieve surface1.9 m² Number of sieve decks:2 Number of fractions:3 Sieve sizes700x680 mm Sieve perforation5,5-1,5 mm With covercheck InletDia: 150 mm OutletDia: 140 mm, Dia: 110 mm (2x) Unbalance drivecheck Motor1.5kW, 220-240/380-420 Volt, 940 rpm Variable speed drivecheck With extra sieve decks1 MaterialStainless steel 1.4541 (321) Information Year of construction2006 Mounted on mild steel framecheck With switchcheck With switchgearcheck(as is) Floorspace4,5x1,9 m Total height1,6 m Weight2100 kgSorting sievesEngelsmannSieves > Sorting sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

General SKU179D660 LocationBarneveld MakeEngelsmann Main Features MaterialStainless steel Motor0.25 KW Length2500 mm Specified Features - Sorting sieve Sorting sieve(1x) Number of sieve decks:2 (2500x220mm) Number of fractions:2x 5 500x220mm) With covercheck InletDia. 100mm Outlet11x Dia. 25mm Motor0,25 KW MaterialStainless steel Information With switchgearcheck Floorspace3,4x0,9 M Total height2,0 MSorting sievesEngelsmannSieves > Sorting sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU043R200 LocationBarneveld MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88, Material hastelloy Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Miscellaneous Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Information Floorspace1,7x0,7 M Total height1,2 M Weight800 KgMiscellaneous MillsEngelsmannMills > Miscellaneous MillsBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU245P314 LocationBarneveld MakeEngelsmann AG (DE) TypePalafix 20/30 No.48262 Year of construction1993 Main Features MaterialStainless steel Motor0.55 KW Length300 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesdia.200mm x L 300mm Inletdia.300 mm Outletdia.240 mm Motor0.55 KW, 220/380 Volt (EEx) Speed680 rpm With sieve cagecheck Sieve perforation2 mm MaterialStainless steel 1.4571 (316Ti) Information Floor space1,7x0,5 M Total height1,0 M Weight200 KGRotating sievesEngelsmannSieves > Rotating sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU004U062 LocationBarneveld MakeEngelsmann TypeKSM-9 Cbm No.10 562 Year of construction1985 Main Features MaterialStainless steel Volume12000 Ltr. Motor16 KW Specified Features - Pre-mixer MaterialStainless steel 1.4541 (321) Pre-mixerConical screw mixer (1x) Capacity12.000 Ltr, Useful 9.000 Ltr Vessel sizesdia. 2100x5050mm Manholedia. 500mm Inletdia. 150mm Motor11/16 KW, 500 Volt (Ex) Speed mixing shaft3/6 Rpm Information Floorspace2,2x2,2 M Total height6,5 M Weight8500 KG ATEX compatiblecheck Extra Specifications- Jacketed screw (120 Ltr), Working pressure 4 bar (Test pressure 5,2 Bar) Pre-mixersEngelsmannMixers > Pre-mixersBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

Control Type: CC200 Number of hours: 45,000 H Closing Closing force: 50T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Platform dimensions: 500 m x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 24.8D cm3: 69 Bars: 2400 General: Motor power: 15KW Heating power: 6.8KW Options: Cores: 1 Robot interface: yes Bi metal: yes

Control type: CC200 Number of hours: 8,000 hours Closing Closing force: 110 T Opening stroke: 350 mm Between columns: rotating table: 1,200 mm Plate dimensions: rotating plate: 1,200 mm Mini/maxi mold: 250 mm Max distance between trays: 600 mm Injection: Screw diameter: 18 mm Screw length: 18.7D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Closing weight: 10T Injection weight: Length dimensions: 2.62M Width dimensions: 1.68M Height dimensions: 4M Options: Bi metal: yes

Control type: CC 200 Number of hours: 28,100 hours Closing force: 400T Opening stroke: 1000 mm Between columns: 1300 x 1100 mm Tray dimensions: 1300 x 1100 mm Mini/maxi mold: 450 mm Max distance between trays: 1450mm Injection: Screw diameter: 55 mm Screw length: 20D cm3: 510 Bars: 2050 General: Motor power: 55kw Heating power: 12.9kw Closing weight: 29T Injection weight: Length dimensions: 8.60 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: yes Bi metal: yes Others: Magnetic plate, 6 hydraulic sequentials? Robot KUKA KR 60L30-40KS 2012

Closing force: 50 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 20D cm3: 45 Bars: 2400 General: Motor power: 15 kW Heating power: 5.3 kw Closing weight: 3T

Control type: CC200 Number of hours: 45,000 hours Closing force: 50T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 m x 450 mm Mini/maxi mold: 200 mm Max distance between trays: 600 mm Injection: Screw diameter: 25 mm Screw length: 24.8D cm3: 69 Bars: 2400 General: Motor power: 15KW Heating power: 6.8KW Closing weight: 3T Injection weight: Length dimensions: 3.4M Width dimensions: 1.3M Dimensions height: 1.8M Options: Cores: 1 Robot interface: yes Bi metal: yes

Control type: CC 200 Number of hours: 35,500 hours Closing force: 400T Opening stroke: 1000 mm Between columns: 1300 x 1100 mm Tray dimensions: 1300 x 1100 mm Mini/maxi mold: 450 mm Max distance between trays: 1450mm Injection: Screw diameter: 55 mm Screw length: 20D cm3: 510 Bars: 2050 General: Motor power: 55kw Heating power: 12.9kw Closing weight: 29T Injection weight: Length dimensions: 8.60 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: yes Bi metal: yes Others: Magnetic plate, 6 hydraulic sequentials, kuka KR60L30-4KS robots 2012

Year of manufacture: 2000 Screw diameter: 25 mm Injection volume: 69 cm3 Length/Diameter ratio: 24.8 L/D Maximum injection rate: 104 cm3/s Pressure on the material: 2000 bar Temperature zones: 4 Closing force: 500 kN Mold thickness: 200 mm Heating power: 6.8 kW Total installed power: 15 kW Oil quantity: 140 L Machine dimensions: 3800 x 1280 x 1970 mm Machine weight: 4700 kg

Clamping force [kN] 23000 Dimensions of mounting plates (hxv) [mm] 2,900 x 2,500 Clearance between columns (hxv) [mm] 2.000x1.600 Maximum opening width [mm] 3000 injection unit Screw diameter [mm] 135 Injection volume [cm3] 8870 Dimensions and weight Net weight with control cabinet [t] 141

Closing unit Clamping force [kN] 400 Dimensions of mounting plates (hxv) [mm] 510 x 535 Clearance between columns (hxv) [mm] 320 x 320 min./ max. mold height [mm] 150 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection pressure [bar] 2050 Electric-hydraulic equipment Nominal power of the pump motor [kW] 10 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 2.5 Dimensions (L x W x H) [m] 3.30 x 1.18 x 1.67

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 850 x 750 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection pressure [bar] 2019 Electric-hydraulic equipment Nominal power of the pump motor [kW] 23 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 9.60 Dimensions (L x W x H) [m] 5.54 x 1.86 x 2.20

Clamping force [kN] 5500 Dimensions of mounting plates (hxv) [mm] 1345 x 1280 Clearance between columns (hxv) [mm] 915 x 860 Maximum opening width [mm] 850 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1960 Injection weight [g] 1765 Injection pressure [bar] 1730

Closing unit Clamping force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2480 Injection weight [g] 2254 Electrical and hydraulic equipment Rated power of the pump motor [kW] 55 Heater power [kW] 62

Clamping/injection matrix Clamping force [kN] 6500 Mounting plate dimensions (hxv) [mm] 1465 x 1360 Clearance between columns (hxv) [mm] 1025 x 930 Min./max. mold height [mm] 450 / 950 Maximum opening width [mm] 1350 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1193 Shot weight [g] 1085 Dimensions and weight (approximately) Net weight with control cabinet [t] 33 Dimensions (L x W x H) [m] 8,3x2,5x2,33

Closing unit Closing force [kN] 10000 Clearance between columns (hxv) [mm] 1400 x 1150 Min./ max. mold height [mm] 492 - 1092 Maximum opening width [mm] 2292 Injection unit Screw diameter [mm] 105/30mm Injection volume [cm3] 3053/100 Injection weight [g] 2775/90.9 Electric-hydraulic equipment Pump motor power [kW] 75 Heater power [kW] 45 Machine equipped with magnetic tables. Robot: KUKA KR60 L30-3 KS-F

Closing unit Clamping force [kN] 2600 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 608 Injection weight [g] 669 Injection pressure [bar] 1725 Dimensions and weight Net weight with control cabinet [t] 22.2 Dimensions (length x width x height) [m] 7.5 x 1.95 x 3.1 The diameter of the screw in the unit is W 40mm The injection volume of the W unit is 251 cm3 The injection weight of the W unit is 276.1g The specific injection pressure of the unit is W 1297 bar The screw diameter in the V unit is 22mm

Closing unit Clamping force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2480 Injection weight [g] 2254 Electrical and hydraulic equipment Rated power of the pump motor [kW] 55 Heater power [kW] 62 Barrier Screw cascades: 4 pneumatic nozzles air valves: 2 valves

Used J. Engelsmann model VIRO 300-800-4571-St/FDA-konform polished stainless steel (AISI 316Ti) cylindrical rotary sifter. Cylindrical screen measures 300 mm diameter x 600 mm lenght. 3-blade rotor is driven through Ex Stöber gearbox by 3.0 kW, 400 V, 1425 rpm, 50 Hz Ex electric motor, the final rpms are 602 rpm. There is also ATEX vibro motor 0.26 kW, 400 V, 3000 rpm, 50 Hz installed above the screen to increase screening efficiency. Feeding inlet has diameter 120 mm. Discharge hopper for particals smaller than holes of the screen has pneumatical valve and diameter 300 mm. Discharge hopper for particals bigger than holes of the screen has diameter 250 mm. Mounted on stainless steel frame. Overall dimensions are approx: 2600 mm x 800 mm x 2280 mm (height), weight approx 500 kg.

Injection weight: 198 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 410x460 Size of plates: 650x600 Min mold height: 150 Control type: LC 200 Tongue: English,Other Installed power: 18 Working hours: 36000 Libra: 4400 Dimensions: 4.7 x 1.3 Feed hopper: NO Robot socket: Yes Air valve: Yes

Injection weight: 50 g Closing force: 500 kN State: Used Screw diameter: 25 Injection pressure: 2400 Column spacing: 320x370 Size of plates: 520x470 Min mold height: 150 Control type: LC 200 Tongue: English,Other Installed power: 14 Working hours: 37500 Libra: 3400 Dimensions: 3.8 x 1.3 Feed hopper: NO Robot socket: Yes Air valve: Yes

Key data: 1000 kN, 198 g/PS, 40 mm

Angel E-max 440-100 (216) General information Item number: (216 MB) Availability: In stock Year of construction: 2009 Brand: Angel Specifications Spray weight: 198 g Clamping force: 1,000 kN Stand: Used Screw diameter: 40 mm Spray pressure: 2000 bar Tie bar spacing: 410 x 460 mm Clamping plate size: 650 x 600 mm Tool installation height min.: 150 mm Control: LC 200 Language: English,Swedish Power: 18 kW Operating hours: 36000 h Weight: 4400 kg Dimensions: 4.7 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Key data: 500 kN, 50 g/PS, 25 mm

Angel E-Max 200-50 (215) General information SKU: (215) Availability: In stock Year of construction: 2008 Brand: Angel Specifications Spray weight: 50 g Clamping force: 500 kN Stand: Used Screw diameter: 25 mm Injection pressure: 2400 bar Tie bar spacing: 320 x 370 mm Clamping plate size: 520 x 470 mm Tool installation height min.: 150 mm Control: LC 200 Language: English/ Swedish Power: 14 kW Hours: 37500 h Weight: 3400 kg Dimensions: 3.8 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Clamping force 150 ton

Injection unit Screw diameter: 45 mm Calculated injection volume: 319 cm3 Pressure on the material: 1520 bars Closing unit Closing force: 1250 kN Dimensions of the trays: 740 x 700 mm General Heating power: 20 kW Weight: 9000 kg Other Equipment : Commissioned: 1999 Number of hours: 46241 h Tonnage: 125

Key data: 700 kN, 139 g/PS, 35 mm

Year of construction: 2002 Clamping unit - Clamping force: 700 kN - Tie bar width: tie-barless - Tool installation height 250/ 700 Injection unit - Shot weight (HP): 139 g - Screw diameter: 35 mm Pump running time - approx. 81,042 h Remark: - Dispensing without sprue picker and external Peripherals - VT card 2 defective General - 4 core pulls

Description: operating hours: approx. 33489 hrs. 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1050 mm min. mould thickness: 300 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 Tonnen production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1250 mm min. mould thickness: 500 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW injection valve missing  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: Serial number: 24904, Own weight: 21,000 kg Equipment: Tie-bar-less, including rail guide underneath INFO: Device can be dismantled and is available at short notice Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 5,000 x 2,680 x 2,800 mm, weight approx.: 21.000 kg

Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the  ...

Description: Serial number: 46984, weight: 10,000 kg Clamping unit: Mold height min. 795 mm, max. 1,500 mm, opening stroke: 1,205 mm, piston diameter: 125 mm, rod diameter: 90 mm, number of cylinders: 1 Clamping force max. stroke: 1,200 mm, piston diameter: 600 mm, number of cylinders: 1, flow rate pumps 390 l/min, speed: 17 mm/s, ejector: stroke 250 mm, piston diameter: 85 mm, rod diameter: 63 mm, number of cylinders: 1 Equipment: Tie-bar-less Attention: the lot only includes the injection molding machine, other peripherals such as robot arm, etc., as shown in the photo, are not included in the lot, but including staircase platform INFO: Production must be stopped to remove the equipment, so it would be preferable to dismantle the system during the interruption in summer (end of July, beginning of August). Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 10,331 x 2 ...

B&A REF: 9017 TON: 180 SHOT WEIGHT: 360 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 760 X 760MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 600MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 150MM CONTROLS: CC 200 AIR VALVES: 1 HEATING CAPACITY: 15.3KW ROBOT INTERFACE: EUROMAP 67

The KEBA keypad HT511-221/ENGEL/50200/19 - 2-stage enabling button - comes from an ENGEL ERC 34-1-E Handling from 2007. The serial number is 50200-01062. The device is ready for connection with a coupling plug.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage enabling button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02216. The device is ready for connection with coupling plug incl. soft case.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage approval button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02213. The device is ready for connection with coupling plug incl. soft case.

MOOG valve for injection moulding machines ENGEL

Control CC 100 for ENGEL injection moulding machines

Inverter for ENGEL robots Acopos Multi PO 220 Acopos Multi CO160

Power Distribution Panel SIEMENS NV30/250-FG NV10A ( NV30/250-FGNV10A ) FG 8694 ( FG8694 ) 3800 : V 250 A with load racing switch, 3 surge arresters 6 main fuses and 15 shunt fuses voltmeter with voltage control switch New ! Dimensions: 920 x 620 x 330 mm

Pneumatic cylinder NORGREN PRA/182125/W2/250 stroke: 250 mm rod diameter: Ø 32 mm pmax: 16 bar used, tested ! Dimensions: 710 x 225 x 160 mm

3-jaw chuck, three-jaw chuck, power chuck BIAL, BISON 2404-250 outer Ø: 250 mm bolt circle Ø : 172 mm height with jaws: 167 mm max. 3000 rpm jaws individually adjustable by toothing New ! Dimensions: 250 x 250 x 170 mm

Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRÄZISIONSWERK 501 x 250 x 250 mm Quality 2 all slotted holes Ø 31 x 71 mm 2 chambers 225 x 220 x 235 mm used, tested ! Dimensions: 501 x 250 x 250 mm