engel 200 used for sale

Equipped with: windshield wipers, airbag, electric windows, handbrake, lights, mp3, Auction-ID: A1-42016-175

Equipped with: Fendt 922 Vario (2008), s/n 919231793, stepless Vario transmission (0 – 50 km/h), 4WD with differential lock, fuel tank: approx. 530 litres, Load-sensing, engine TCD2013L06 4V, sprung front axle, rear axle: 260FL version, hydraulic lift pump 160 l/min, front linkage, front PTO, rear PTO: 540E / 1000 rpm, power lift (EPC), hydraulic trailer brake, air brake system (2-line), double line brake system, comfort cab with suspension, varioterminal control, joystick control (Variotronic), auto-guide system (high precision), front fenders, fender flare, 3-point linkage CAT 2/3, radar sensor, hydraulic trailer brake, paddle board flares, engine brake, free return, Auction-ID: A1-40137-5

Compressor Schneider as good as new, only 47 and a half operating hours, only used at trade fairs no continuous operation Technical Specifications & Highlights Capacity: approx. 500 l/min suction capacity (approx. 350-400 l/min delivery volume). Pressure: Max. 10 bar. Container: 60 litres (horizontal, mobile). Drive: 400V three-phase (D-model) – provides a powerful start-up and is more efficient than 230V models. Speed: V-belt-driven 2-cylinder unit with low speed (smooth running, less wear). Auction-ID: A1-46501-271

Equipped with 6-Cil. Diesel engine; 45 km/h; PTO speed 540/540E/1000/1000E rpm; 3 double-acting hydraulic valves; 7-Pin plug; hydraulic brake valve; depressurized return; adjustable tow bar; lower drawbar; fender control; cab suspension; front axle sprung; cable handbrake gives malfunction! Auction-ID: A1-40137-30

Equipped with racing seats; 5-point harness and roll cage and various spare parts including bonnet; axles etc. odometer reading 56105; Auction-ID: A1-42016-170

MMBS - Mercedes 5 cylinder 2.9L Turbodiesel - Limited approx 80km/h - Towbar - approx 258,000, still driven daily Auction-ID: A1-42016-7

Electric windows and mirrors, disc tachograph, manual 5 gears, camera in cargo space, inside dimensions body LxWxH 4000x2100x2200mm, ramp flap, side door Auction-ID: A1-42016-294

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-42016-214

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-42016-209

Electric windows and mirrors, front fog light, steering wheel control, cruise control, multimedia system with Bluetooth, climate control, heated front seats, leather upholstery, automatic gearbox, electrically adjustable seats with memory, rear parking sensors, tow bar with 13-pin plug 12v, electric tailgate Auction-ID: A1-42016-260

Approximately 45cm diameter; approximately 105cm long brush ; Mounting bracket included Auction-ID: A1-40137-385

type TA23; steering tandem axle; hydraulically force-steered; hydraulically driven smooth roller; v.v. articulated drawbar; wide-angle PTO; prepared for tire pressure change system; K80; electric control; unused rotor; max. Weight 23,000 kg, Belgian registration Auction-ID: A1-40137-9

Equipped with: work lights, metal cage, horn, hour reading not obsolete Auction-ID: A1-40137-174

Equipped with: Air conditioning, front linkage, PTO, crawler gear, suspended front axle, suspended cab, 135 hp, PTO: 540/540E/1000/1000E, 6. Cylinder, Auction-ID: A1-40137-25

Equipped with: foil, swivel function, lift function, Max 1500kg lift capacity Auction-ID: A1-41995-100

LED screen is currently not working, all parts are included to get it working Auction-ID: A1-42016-20

Equipped with: PTO, weighing device, central lubrication, luff with conveyor, reversing camera Auction-ID: A1-40137-238

Slide size 1520x1070 mm Slide stroke 254 mm Shots per minute 36 Opening between the uprights 1520x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-11

last inspection until 09-2025 Auction-ID: A1-41995-151

Used excavator in working condition Auction-ID: A1-40418-10

Transport height: 2200 mm; Scissor lift platform, designed for rough terrain; Equipped with Deutz Diesel engine; Auction-ID: A7-46458-33

Grimme Varitron 270-built 207 - Top maintained 2-row potato harvester Technical data -Model: Varitron 270 -Year of manufacture: 2007 -Number of rows: 2 -Engine hours: 3,603 -Cleared area: 1,060 -Unloading conveyor: 7 t bunker -Drive: hydrostatic -Tyres: large volume, gentle on the ground Equipment; Special features - Comfort cab with optimal all-round visibility -Automatic screen chain and separation table control -Sorting table for manual sorting -Height-adjustable bunker unloading conveyor -Hydraulic settings for efficient harvesting results - Lighting for night use -  Maintenance-friendly design Sieve Belt  New Elevator Belt New Double Multisep Ready to use! Auction-ID: A7-46606-1504

Technical data see pictures Auction-ID: A1-46607-99

STEINEL BOS 200/180 ST.B – Pillar Drill General data: Manufacturer: Steinel Model: BOS 200/180 ST.B Machine type: Pillar drill (column drilling machine) Technical details: Multi-speed gearbox: - 355 / 710 rpm - 1000 / 2000 rpm - 1400 / 2800 rpm Motor: 2-speed motor Description: Industrial pillar drill STEINEL BOS 200/180 ST.B designed for precision drilling operations. Equipped with a multi-speed gearbox and 2-speed motor, the machine offers flexible speed selection for various materials and applications, making it suitable for workshop and production environments. Auction-ID: A7-46498-72

Fully populated tool changer, 30 position tool changer, with dividing head - 4 axis, Vise ALLMATIC LC125, Handwheel Auction-ID: A1-46607-33

Viewing by appointment Unused Auction-ID: A1-40377-29

Extra options : All around LED lighting , Blue spot , Half cabin , fire extinguisher , Beacon Auction-ID: A1-40377-19

Viewing by appointment Auction-ID: A1-40377-6

Extra options : All around LED lighting , Blue spot , Half cabin , fire extinguisher , Beacon Auction-ID: A1-40377-37

- Tool changer: 16-speed - Chip tray available and chip conveyor purchased at a later date Auction-ID: A1-46607-1

Kverneland LD 100-200-19-HD Full reversible plough – 5 coulters – heavy-duty professional plough Powerful reversible plough for professional tillage Robust HD construction for heavy floors High area performance due to multi-coulter design Ideal for large farms Equipment: Full body with inserts Additional pre-peelers available Scheibensech Rear Tracking Wheel Hydraulic frame swivel cylinder Hydraulic Packer Arm Cat. III Lower Link Connection Technology: Model No.: LD 100-200-19-HD Multi-coulter plough (approx. 5 coulters recognisable) Hydraulic adjustment Stable frame for high loads Condition: Used Wear parts partly at wear limit Typical signs of wear (rust, abrasion) Auction-ID: A7-46606-1552

Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1024

End clamp Allimex Allislide 2 boxes with 100 pieces Auction-ID: A1-46359-478

Goes forward and backward but does not lift; Auction-ID: A7-46458-112

Golf hook Allimex 2 boxes with 100 pieces Auction-ID: A1-46359-473

Included attachments: - Loading bucket, - Pallet fork, - 2x pallet tines for attaching, - Sistema Space 11 Auction-ID: A1-46493-1

4-axis dividing head Auction-ID: A1-46607-111

Extra options : Fully enclosed cab , All-round LED lighting , Blue spot , beacon Auction-ID: A1-40377-35

MARX – Bottom-Pour Ladle for Aluminum General data: Manufacturer: MARX GmbH & Co. KG, Germany Serial number: 030802 Year of manufacture: 2003 Machine type: Bottom-pour ladle Condition: Used Weight: approx. 800 kg Dimensions (L x W x H): approx. 1200 x 1000 x 1500 mm Technical details: Capacity: approx. 236 kg Inner diameter: approx. 600 mm Discharge system: Bottom-pour with mechanical gearbox Control: Manual handwheel for flow regulation Power: Manual operation Construction: Heavy-duty refractory-lined vessel Integrated lifting beam Gearbox-driven discharge mechanism Description: Industrial bottom-pour ladle designed for safe transport and controlled pouring of molten aluminum. Equipped with a mechanical gearbox and handwheel for precise discharge control, the unit allows accurate dosing of molten metal in foundry operations. The refractory-lined vessel ...

Kalmar is ready for immediate operation, the forklift mast can be dismantled for transport at an additional cost. Auction-ID: A1-46332-1

Round Baler New Holland 658 CropCutter Year of Make: 2000 With cutting unit (CropCutter) – suitable for silage, hay and straw Network binding available Pick-up width: approx. 2.00 m Bale diameter: up to approx. 1.80 m Number of bales: approx. 30,000 Equipment: Bale ejector hydraulic pick-up Condition: Used general condition Signs of wear and tear due to age and use functional not tested Auction-ID: A7-46606-1021

Tool changer: 18 places Auction-ID: A1-46607-95

Allimex cable clamp Allin 2 boxes with 1000 pieces Total: 2000x bolt + 2000x knurled nut M8 Stainless steel Auction-ID: A1-46359-489

Accuway UM130 with 4th axis: Tool changer: 32-speed Spindle nose to table: 150 - 700 mm Table size: 1500 x 650 mm T-slots: 5 x 18 x 100 mm Max. workpiece weight: 1500 kg Feed speed: X/Y/Z: 30 m/min Max. tool length: 300 Auction-ID: A1-46607-18

• Type: Autonomous scrubber dryer / floor cleaning robot • Operation unknown • Working width: 70 cm • Squeegee width: 90 cm • Clean water tank capacity: 90 litres • Tank capacity dirty water: 90 litres • Battery: 24V, 180 Ah gel battery • Autonomy / working time: up to 4 hours • Charging time: depending on charger, usually several hours Performance • Theoretical capacity: 1260 m²/h • Practical capacity: approx. 1050 m²/h (low obstacle density) • Travel speed: 1.8 km/h • Turning radius: 1.4 meters Dimensions & Weight • Length: 135 cm • Width: 90 cm • Height: 128 cm • Weight empty: 252 kg • Ready-to-use weight: up to 471 kg (depending on configuration) Smart features • Can be operated autonomously and manually • Touchscreen operation (multiple languages, incl. Dutch) • 360° safety sensors • Laser/LiDAR navigation •  ...

Not tested; No battery; Auction-ID: A7-46458-96

With cabin; with Joystick; 4 hydraulic functions with a fork opening of 1360 mm; Auction-ID: A7-46458-11

Powerful butterfly mower deck set for high area performance Working width approx. 8.3 m for efficient forage harvesting Combination of front and rear mower possible With reversing device (RÜFA) for flexible application options Equipment: Conditioner with plastic fingers Wide distributors Lighting system Front and rear combination possible PTO drive (1000 rpm) Technology: Disc mower deck (robust construction) High impact even in heavy vegetation Uniform placement of the mowed material Suitable for large areas and contractors Condition: Used, functional according to the previous owner Without PTO shaft Function not checked Auction-ID: A7-46606-1032

Measuring range Z Measuring range X 450 / 620 / 820 mm 210 / 310 mm Max. tool Ø pharyngeal gauge Ø 420 / 620 mm 100mm incl. computer and printer Auction-ID: A1-46607-77

Table dimensions: 1500 x 1000 Table load: 2,500 kg Distance between table and spindle: 200-800 mm Tool Changer: 30 Tool Measurement: Blum Laser Chip conveyor electr. Handwheel Maximum height: 3550 mm Auction-ID: A1-46607-42