engel 200 used for sale

Mini excavator drill rig, compatible for excavators from 800 - 2500 kg, bore 200 mm, never used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-45833-272

Electric pallet truck, with built-in scale, battery-powered digital electronic panel, maximum weighing capacity 2000 kg, never used 0 hours Overall dimensions: 1300 x 700 x 800 mm Weight: 150 kg Auction-ID: A7-45833-141

Electric pallet truck, with built-in scale, battery-powered digital electronic panel, maximum weighing capacity 2000 kg, never used 0 hours Overall dimensions: 1300 x 700 x 800 mm Weight: 150 kg Auction-ID: A7-45833-17

Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-45834-365

Self-locking magnet, 200 kg pull, never used Overall dimensions: 300 x 200 x 200 mm Weight: 10 kg Auction-ID: A7-45833-354

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-45834-121

Self-locking magnet, 200 kg pull, never used Overall dimensions: 300 x 200 x 200 mm Weight: 10 kg Auction-ID: A7-45834-354

Self-locking magnet, 200 kg pull, never used Overall dimensions: 300 x 200 x 200 mm Weight: 10 kg Auction-ID: A7-45834-397

200 mm bucket for JPC excavators (except HT25), never used Overall dimensions: 200 x 300 x 300 mm Weight: 10 kg Auction-ID: A7-45833-417

Self-locking magnet, 200 kg pull, never used Overall dimensions: 300 x 200 x 200 mm Weight: 10 kg Auction-ID: A7-45833-397

Notebook TAROX M765T built in 2009, without software, bag

Boltless shelf clip shelf META GZG20820S approx. 200x200x80t cm, shelf load 350 kg, without contents, is lifted through the ceiling by means of a 2 ton chain hoist

Workstation approx. 200 cm, lighting superstructure

Banding machine ATS US-2000AD-R, S/N BT 561/7 09219, year 2016

Discharge Power Supply HAUG Tatic Line EN SL LC Year 2009, S/N 01.7833.000, 230V 50-60Hz, Box

Rolling workstation Q-Wall approx. 200 cm

Digital scale KERN 440-33N max. 200 g, d= 0.01 g, calibrated 2025-03, S/N WD170045546, internal W007

Work table approx. 200x200 cm, plus desk

Pallet truck MIC TMW22-4 load capacity 200/500/2,000 kg year 2006, e=d= 0.1/0.2/0.5 kg, S/N 88242.063701

Rolling work table approx. 200x200 cm Workstation 501, w. thermal transfer printer CAB Squix, internal PRSBG74, 2x ultrasonic converter IBFM USG612

Work table approx. 200x250 cm, electrification

Temperature control unit GWK Teco CS 90 built in 2003, S/N 13247, 9.5 kW, internal No. 16

Precision balance KERN EMB 2000-2, 2,000 g, d= 0.01 g, S/N WD120055735, no calibration, internal W010

Desk PALMBERG décor maple approx. 200x80 cm, sideboard approx. 100x85 cm, 2 swivel chairs

PLUNGE Saw FESTOOL TS 55 EBQ Year 2003, S/N 040419, Case, Rail FS 1400/2

ELTHA E31/T Measuring and Test Wall 2007, S/N 31.063, 25A IP32

With rolling table, Mettler Toledo, model SB60.2, max. load 60 kg. Auction-ID: A1-45977-288

Auction-ID: A1-45977-41

Auction-ID: A1-45977-40

a hydraulically operated lifting module with a load capacity of 250 kg, for ergonomic lifting of lighter loads Auction-ID: A1-45977-16

Workpiece Dimensions - Length 2800 to 5600mm - Width max 2100mm - Thickness 15mm to 40mm - Working height 950mm - Stacking space - Protective grille The panel saw is NOT part of the scope of purchase! The panel storage must be dismantled and loaded by the buyer in the period from 05.08.2026 to 07.08.2026. If this service is not provided, the seller reserves the right to dismantle and dispose of the entire system independently. Purchase sums already paid will not be refunded. Auction-ID: A7-45980-1

Auction-ID: A1-45977-4

Auction-ID: A1-45977-15

Label Printer ZEBRA ZM400-200E-4000T, S/N 08J104800872

Boltless shelf blue/grey approx. 200x200x40 cm

Boltless shelf black approx. 200x200x40 cm

Digital scale KERN 440-33N max. 200 g, d= 0.01 g, calibration 2025-03, internal W008

Digital scale KERN EMB max. 200 g, d= 0.01 g, calibrated 2025-03, internal W048

Precision balance KERN EMB 2000-2, 2,000 g, d= 0.01 g, calibration 2025-03

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

Zippo 2-Post Lift Load capacity: 3000kg Year of Make: 2004 Type: 1731 Auction-ID: A7-45974-4

Auction-ID: A1-45937-2311

Power: 0.77 kW Operating parameters: Working pressure 15 bar; FAD 3.50 m³/min (124 CFM); noise ~50 dB(A); dim. 628 x 521 x 825 mm; wt. 75 kg Workpiece capacity: Compressed air drying for industrial air systems Supported edges: N/A Edge types: Air drying; moisture removal Included equipment: Refrigerated air dryer; air-cooled system; control panel; compact housing Compliance: Industrial air treatment unit; CE N/C Power supply: Electric Year/Manufacturer: 2005; Manufacturer N/C Remarks: Used condition; suitable for integration with compressors up to ~3.5 m³/min capacity Compact refrigerated air dryer for efficient moisture removal in compressed air systems up to 15 bar. Auction-ID: A7-45988-8

Auction-ID: A1-45937-2323

DOUBLE HEAD CUTTING MACHINE Inv. No. 13.109Z1 Make MECAL Model SW-453 Mach. No. 9001099 Year 2002 Useful cutting length 4.000 mm Max. lame diameter 500 mm Pneumatic inclination of the heads 90° / 45° - 22.5° Including: External inclination Feeler Auction-ID: A1-45737-169

Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-45737-6

Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 600 kN Clearance between Tie Bars: 370 mm x 370 mm Platelet Dimensions: 570 mm x 570 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 40 mm Shot Volume / Shot Weight: 188 ccm / 172 grams PS Injection Pressure: 1390 bar GENERAL DATA Motor: 15 kW Heaters: 5.5 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Service book: Yes Auction-ID: A7-45917-1

Auction-ID: A1-45937-2343

Auction-ID: A1-45937-2314

Power: 22 kW (30 hp); VSD (variable speed drive) Operating parameters: Working pressure 4–13 bar (adjustable); FAD 0.72–4.00 m³/min (25–141 CFM); noise ~67–70 dB(A); operating hours 64,000 h; dim. 1,330 x 870 x 1,725 mm; wt. 516 kg Workpiece capacity: Industrial compressed air supply; variable demand applications Supported edges: N/A Edge types: Compressed air generation; drying (integrated dryer) Included equipment: Rotary screw compressor; VSD inverter control; integrated air dryer (full feature); air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; energy-efficient VSD system for variable load operation 22 kW variable-speed rotary screw compressor with integrated dryer and adjustable pressure ran ...