132,018 used machines on RESALE, but how to find them? Machine Search
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input electronic modules ET 200S -Electronics module: type 6ES7 132-4JB50-0AB0 -Terminal module: 6ES7 193-4CB30-0AA0 -Number: 4x module available -Price per piece -Dimensions: 130/20/H75 mm -Weight: 0.1 kg/pc
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input electronic modules ET 200S 4 pieces -Electronics module: type 6ES7 138-4CA00-0AA0 -Terminal module: 6ES7 193-4CE30-0AA0 -Price/delivery: complete -Dimensions: 130/20/H75 mm -Weight: 0.1 kg/pc
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: HADEF, electric chain hoist with chassis and connection cable/main switch -Chain hoist: Type CH3, load capacity 2000 kg -Main stroke: 5 m/min -Fine stroke: 1.25 m/min -Chain length: 3.45 m -Crane chassis: Carl Stahl type 208/05, maximum beam width 232 mm -Number: 8x chain hoist available -Price: per piece -Dimensions: see photo and technical drawing -Transport dimensions: 1000/700/H540 mm -Weight: 90 kg/unit
Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Konecranes, crane chassis -Beam width: up to 242 mm -Load capacity: 2000 kg -Dimensions: see technical drawing in the photos -Dimensions: 335/300/H255mm -Weight: 19 kg
Gear motor, electric motor, electric gear motor, gear motor Movigear classic -Manufacturer: SEW-Eurodrive, gear motor Movigear classic -Type: MGFAT2-DSM/WA/PE -Speed: 3.6...36.2 rpm i= 55.25 -Connection voltage: 400 V -Torque class: 200 Nm -Hollow shaft: Ø 30 x 90 mm -Protection class: IP66 -Dimensions: 250/150/H300 mm -Weight: 14kg
Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece
DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x60/I SN31 IGO500/2 -Voltage:40V -Torque: 324 N/cm -Speed: 200 rpm -technical data: see photo type plate -Shaft: Ø 10 x 27 mm -Number: 11x engines available -Price per piece -Dimensions: 210/90/H100 mm -Weight: 2.6kg/pc.
gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Motovario, adjustable gear motor -Gearbox: Type TKR / 5 40 - 200 rpm -Motor: EM type MA 71 b4 0.37 kW -Shaft: Ø 24 x 50 mm -Design: B3 -Dimensions: 465/190/H210 mm -Weight: 21 kg
Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank, portable -Hydraulic pump: pressure up to 200 bar, unfortunately without type designation -Flow rate: 1.2 l/min -Motor: EP 1.1 kW / 1410 rpm -Hydraulic tank: with shut-off valve -Individual components: see photos -Dimensions: 400/220/H430 mm -Weight: 30.5 kg
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 Analog Input Module -Type: 6ES7 134-6GB00-0BA1 -Number: 4 modules available -Price: per piece -Dimensions: 70/15/H55 mm -Weight: 0.1 kg/pc
Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0CN0 -Number: 2 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.1 kg/pc.
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 ET 200SP Analog Input Module with Base Unit -Type: 6ES7 134-6GB00-0BA1 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Number: 3 modules available -Price: per piece -Dimensions: 140/20/H70 mm -Weight: 0.1 kg/pc
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 ET 200SP Analog Input Module with Base Unit -Type: 6ES7 134-6FB00-0BA1 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0BA0 -Quantity: 1 module available -Dimensions: 120/20/H75 mm -Weight: 0.1 kg
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module, communication module -Manufacturer: Siemens, Simatic S7 ET 200SP communication module with base unit -Type: 6ES7 137-6BD00-0BA0 6ES7137-6BD00-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Quantity: 1 module available -Dimensions: 140/20/H70 mm -Weight: 0.1 kg
Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0BN0 6ES7155-6AU01-0BN0 -Number: 3 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.15 kg/pc.
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg
Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 2000 kg -Load cell: 4x Tedea-Huntleigh 500 kg -Dimensions: 1500/600/H80 mm -Weight: 80 kg
Double scissor lift table, lift table with double scissor mechanism, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: KAISER KRAFT, Scissor lift table type M2000 -Load capacity: 2000 kg -Platform: 1000 x 2000 mm -Dimension when retracted: Height 805 mm (without feet) -Extended dimension: Height 3400 mm -Transport dimensions: 1000/2000/H1050 mm -Empty weight: 1245 kg
Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg
Everything works. 20 HP Kohler petrol engine. Weight: 650 kg. Milage: 181 hours Auction-ID: A7-40553-1
\"Engine: LPG Load capacity: Nominal load capacity is 4500 kg. Drive: Hydrostatic, ensuring smooth direction changes and precision. New chain The forklift has new wheels, hydraulic hoses and a starter motor.\" Auction-ID: A7-40553-4
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
PLC controller, expansion module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 Power Module ET 200S -Type: 6ES7 138-4CB11-0AB0 -Term.-Mod.: TM-P15C22-01 -Quantity: 1 module available -Dimensions: 120/21/H75 mm -Weight: 0.1 kg
Assembly table wood self-made approx. 200x100t cm, base, small contents fasteners, without the tools
Assembly workstation wood self-made approx. 200x100t cm, electrification
Mobile extraction METABO SPA 2002 D, 565 m³/h, 1.50 kW, net weight approx. 116 kg, S/N 11435314605
Carpenter's workbench approx. 200b cm, base shelf, small parts holder on the wall
Wooden work table approx. 200x84hx50t cm, with pin board
A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-16
A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18
In order to submit a bid on this lot, a deposit of €1300.00 is required. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-9
A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Rotary table diameter 700 mm 24-position tool changer Cutting speed 15000 mm/min Fast feed speed 30000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-8
Temperature control unit GWK TECO CS 90 Bj. 2002, S/N 12166
Temperature control unit GWK TECO CS 140 year 2008, S/N 20314, internal No. 50
Temperature control unit GWK TECO CS 140 year 2008, S/N 15721, internal No. 35
Temperature control unit GWK TECO CS 140 year 2005, S/N 14526, internal No. 30
Granulate Dryer SIMAR KTF120-300 2007, 400V 50Hz, 7.5 kW, internal 49, PIOVAN S35 1997, S/N 3AL 6748
Temperature control unit GWK Teco CS 90 built in 2003, S/N 13248, internal No. 12
Temperature control unit GWK TECO CS 160 built in 2006, S/N 16035, internal No. 27
Impact Drill BOSCH GSB 20-2 RCE Year 2003, S/N 390010543, Case
Temperature control unit GWK TECO CS 90 built in 2003, 9.5 kW, internal No. 26
Control dispenser for card handling KAS 354/2006-11, 400VAC 50Hz, touch panel SIEMENS Simatic, control cable, pallet
PLC Card Withdrawal Handling KST System No. 418/2006-12, PLC control incomplete, control cabinet, not exactly visible
PLC Card Withdrawal Handling KST System No. 037/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible
PLC Card Withdrawal Handling KST System No. 009/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible
PLC Card Withdrawal Handling KST System No. 035/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible
Machine type: CNC Punching Machine / Nibbling Machine Manufacturer: TRUMPF Model: TRUMATIC 500 (Type 9089) Year of manufacture: 2000 Punching force: 220 kN Working area (X x Y): approx. 2500 x 1250 mm Max. sheet thickness: approx. 6–8 mm Max. punching diameter: 76.2 mm Stroke rate: up to approx. 900 strokes/min Tool stations: 18 positions with rotation Control: Bosch control (TRUMAGRAPH CC 220) Drive system: Electro-hydraulic punching head Positioning system: CNC-controlled X/Y axes Power supply: 400 V / 50 Hz Connected load: 19 kVA Control voltage: 24 V DC Fuse protection: 3 x 35 A Compressed air connection: 6 bar Machine number: 041617 Remarks: CNC sheet metal punching machine for high-speed processing, forming and nibbling operations; equipped with rotating tool system for flexible production Approx. own mass: 11050 kg Approx. dimensio ...
Mini excavator drill rig, compatible for excavators from 800 - 2500 kg, bore 200 mm, never used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-45834-272
maximum number of results exceeded
please refine your search
1.000 € 
