engel 200 used for sale

Inverter for ENGEL robots Acopos Multi PO 220 Acopos Multi CO160

The KEBA keypad HT511-221/ENGEL/50200/19 - 2-stage enabling button - comes from an ENGEL ERC 34-1-E Handling from 2007. The serial number is 50200-01062. The device is ready for connection with a coupling plug.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage enabling button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02216. The device is ready for connection with coupling plug incl. soft case.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage approval button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02213. The device is ready for connection with coupling plug incl. soft case.

Pump ENGEL

Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...

Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design f ...

Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footp ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and com ...

Rexroth Pump Axial Piston Pump AKP140R with Valve for ANGELS refurbished Type: AKP140R with valve Manufacturer Part Number: R901021899 Type code: SYDFEE-20/140R

Stock number: F923, Vibrator weigher, stainless steel,, Engelhardt type AW120/A.DSP-2., Variable speed., 2-tracks., Dosage 0-1000 g., 10 g. interval, Material: Stainless steel AISI 304, Dosage: 0-1000 g.

Stock number: SF242, Item: Vibration sieve, In stock: Yes, Amount in stock: 1 pc., Standing: On a foot, Inner diameter: Ø 420 mm., Outer diameter: D 660 mm., Total height: 1680 mm., Dimensions: L 1180 x W 660 x H 1520 mm., Motor: Estimated 0,25 kW - 380 Volt, Inlet diameter: Ø 510 mm., Outlet diameter: Ø 425 mm., Manufacturer: J. Engelsmann, Model/type: Jel-Fix 45/A, Year: 1975

Stock number: SF243, In stock: Yes, Dimensions: L 900 x W 1000 x H 1600 mm., Item: Vibration sieve, Amount in stock: 1 pc., Standing: On a foot, Inner diameter: Ø 420 mm., Outer diameter: Ø 660 mm., Total height: 2100 mm., Motor: 0,37 kW - 380 Volt, Inlet diameter: Ø 510 mm., Outlet diameter: Ø 425 mm., Manufacturer: J. Engelsmann, Type: Jel-Fix 45/A, Model: 450, Year: 1963

Stock number: SF244, In stock: Yes, Dimensions: L 1100 x W 700 x H 1550 mm., Item: Vibration sieve, Amount in stock: 1 pc., Standing: On a foot, Inner diameter: Ø 420 mm., Outer diameter: D 660 mm., Total height: 1700 mm., Motor: 0,37 kW - 380 Volt, Inlet diameter: Ø 510 mm., Outlet diameter: Ø 425 mm., Manufacturer: J. Engelsmann, Model/type: Jel-Fix 45, Year: 1976

Stock number: SF249, In stock: Yes, Amount in stock: 1 pc., Item: Vibration sieve, Standing: On a foot, Inner diameter: Ø 420 mm., Outer diameter: Ø 660 mm., Dimensions: L 1180 x W 660 x H 1520 mm., Total height: 1680 mm., Motor: 0,37 kW - 380 Volt, Inlet diameter: Ø 510 mm., Outlet diameter: Ø 425 mm., Manufacturer: J. Engelsmann, Type: Jel-Fix 45/A, Model: 450

Injection moulding machine ENGEL/ FERROMATIK, vacuum pumps, controls, cables, fittings, volume without shelves, room area approx. 30 m²

Injection moulding machine ENGEL Duo 2550/500 built in 2014, S/N 199222, clamping force 500 t, displacement max. 1,155 cm³, screw 80 mm, clamping plates 1,200 x 1,200 mm, opening travel max. 750 mm, weight 14,000 kg, control Engel CC200, cascade control, 20 registers, linear robot Engel Viper 20, device no. 199229, built in 2014, machine 153, with suction conveyor PIOVAN T20M, conveyor belt 3,000x800 mm

Hand controls ENGEL 7 pieces, mostly defective, as spare parts carrier

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1

Make: ENGEL Type: Injection Moulding Machine Model: 300tone Serial number: n/a Technical data: - Machine type: Hydraulic injection moulding machine - Control system: ENGEL CC90 - Clamping unit: Horizontal - Tie bar distance: approx. 600 mm (measured) Equipment: - Control panel with display and keypad - Safety enclosure with sliding doors - Hydraulic clamping system - Injection unit with screw - Signal tower light Condition: Used Auction-ID: A7-45993-55

Pneumatic cylinder DESTACO K 3000 - 200 - 6 stroke: 200 mm rod diameter Ø 65 mm Dimensions: 540 x 130 x 130 mm

Pneumatic cylinder FESTO DNGU-32-200-PPV-A S3 158098 stroke: 200 mm Rod diameter Ø 12 mm Dimensions: 345 x 95 x 50 mm

Centering vise, centrifugal clamp PAGUS jaw width: 200 mm jaw height: 50 mm span: 0...200 mm on rotary table with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm

Pneumatic cylinder FESTO DNC-100-200-PPV-A 163472 stroke: 200 mm Rod diameter: Ø 35 mm pmax: 12 bar used ! Dimensions: 580 x 115 x 160 mm

Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 piston Ø 125 mm stroke 200 mm Rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm

Hydraulic Testing Press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment limited by measuring probe and limit switch) largest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm

Motorroller ITOH DENKI Power Moller PM 570 AS - 15 - 200 - 3 - 200 - NR 630 A Diameter: Ø 63 mm Length: 200 mm New ! Dimensions: 260 x 70 x 70 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table, Spotting Plate PAGUS Work surface: 200 x 200 mm Height: 80 mm used, tested ! Dimensions: 390 x 200 x 100 mm

Drill, High Frequency Tool, High Frequency Machines BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! Dimensions: 450 x 300 x 90 mm

Drilling machine, high-frequency tool, high-frequency machines BOSCH 0 602 102 001 0.16 / 0.2 KW 2300 / 3300 rpm / 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! Dimensions: 350 x 200 x 70 mm

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

Refrigeration dryer Atlas Copco FD 110 Air flow rate 6,600 l/min Manufacturer Atlas Copco Machine number CAQ 093483 Type FD 110 Year of construction 2003 max. pressure 13 bar Power consumption 1.4 kW Delivery throughput 6,600 l/min Refrigerant R 404 A Compressed air connection 1 1/2 inch Test run carried out lxwxh 81x70x81 cm Weight 122 kg Auction-ID: 047-DXS-3

Refrigeration dryer Hankinson air flow rate 4,300 l/min Manufacturer: Hankinson Machine number 2300701080 Type HHDP 260 CE-G Year of manufacture 2001 max. pressure 12.8 bar Power consumption 0.82 kW Delivery throughput 4,300 l/min Refrigerant R 134 a with manual steam trap Test run carried out lxhxw 77x69x70 cm Weight 86 kg Auction-ID: 047-DXT-3

Screw compressor Boge S 20-2 Manufacturer Boge Machine number 509692 Type S 20-2 Year of manufacture 2005 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,240 l/min Operating hours 18,903 B/h Idle hours 1,613 B/h Customer service due LxHxW 120x88x115 Weight 350 kg Auction-ID: 047-DXL-3

Hydromak paving machine VARIO 2000 Year of construction 1994 Net weight approx. 950 kg Machine starts perfectly and runs smoothly Engine and drive technically in order Conversion to joystick control with rotary motor started Pliers should be made rotatable (project not completed) Ideal for hobbyists or to complete the conversion Perfectly suitable for paving work/road construction Including original Hydromak broom Robust and proven technology Sale due to lack of time Private sale – no guarantee or warranty Auction-ID: 04L-VNP-1

Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet

\" Scribing and control plate 200 × 200 mm, cast design with feet Scribing or control plate in square design. The plate serves as a flat support and reference surface for testing, marking and control work in toolmaking, quality assurance or in the workshop. Surface finely worked, all around with chamfer. Underside with four cast feet for a stable support. Dimensions: 200 × 200 mm Height: approx. 55 mm Material: cast body with machined surface Design: with feet \" Auction-ID: A7-46417-335

Engine running, but it needs to be checked. Reason for renewal of lifts and BE driver's license needed, which we don't have The ladders are in good condition Auction-ID: A3-43525-2220

Power: Req. tractor power approx. 24 hp; diaphragm pump 55 L/min Operating parameters: Fan Ø 550 mm; air output 24 m/s; gearbox 2 speeds + neutral; vertical spray reach up to 6 m Workpiece capacity: Tank cap. 200 L; orchard & vineyard spraying; 10 nozzles Supported edges: Orchards, vineyards, tree crops Edge types: Air-assisted spraying; phytosanitary treatment Included equipment: Turbine fan Ø 550 mm; diaphragm pump 55 LPM; 10 spray nozzles; 2-speed gearbox + neutral; compact tank frame Compliance: Agricultural sprayer equipment Power supply: Tractor PTO Year/Manufacturer: Mahindra – Airotec 200L 550 Remarks: Lightweight orchard/vineyard sprayer suitable for small tractors and narrow rows Compact 200 L air-assisted sprayer with turbine fan for orchard and vineyard crop protection. Auction-ID: A7-46448-89

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...

technical data: Make: AEG Type: AM 200 L4 Connection: 380 V / 57 A kW: 30 kW rpm: 1470

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.