engel 1000 used for sale

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.

Lifting table, lifting platform, lifting platform, car lift -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg

electric box lifting device, lift lift Brand: KLB Type: Lifter 1000 Built: 2013 Load capacity: 2000N, approx. 200kg maximum lifting height: 102 cm Crate dimensions: 62 x 62 cm Trolley with spindle drive Forks to hang in Cable for power supply Control panel with cable This item is only sold to traders. All information without guarantee

Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg

Vessel for Melting Manufacturer BINDER 1000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available (from 2008)!

Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine  ...

Expanding pliers, expander set, expanding pliers, socket pliers -for tubes: 12/15/18/22/28 mm -Dimensions: 490/165/H260 mm -Weight: 7.2 kg

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN  ...

Pot sealer on stainless frame, 12 x pots, 90mm x 90mm pots, variable temp control and timer settings, 3Ph

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg

Clamping plate, plate field, welding table, welding table, plate boring machine, surface plate, -with: holes -Width: 1000 mm -Length: 1000 mm -External height: 150 mm, panel thickness 100 mm -Number: 7x plates available -Price: per piece -Weight: 720 kg/piece

Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

Pressure gauge, flow meter, measurement and control technology, flow meter liquid -Manufacturer: SKT, flow meter for liquid / water -Measuring range: 100 to 1000 l/h -Accuracy class: 4 -Connection: DN 25 -Pmax: 10 bars -Dimensions: 60/60/H390 mm -Weight: 0.8 kg

Key data: 1000 , 194 , 45

Manufacturer: Arburg Type: 420 C 1000 - 350 Built: 1999 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 cc / 194 gram PS Spray pressure: 1670 bar General Engine: 22 kW Heating: 8.8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 3430 kg Screen text: German

Control box, control unit, pneumatic control -Manufacturer: Festo, pneumatic control system 1000 -Control no.: 3051 9 -Inlet pressure: max. 14 bar -Operating pressure: 4 - 6 bar -Dimension: 490/410/H945 mm -Weight: 56 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs -Length: 1000 mm -Width: 1000 mm -Sheet thickness: 30 mm -Dimensions: 1000/1000/H260 mm -Weight: 402 kg

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

Universal - Swivel - Tilting table for MAHO MH 1000 Clamping area: 1050 mm x 630 mm The Universal - Swivel - Tilting Table is in good condition

Servolift QKS NG 1000 Fassdehrer not complete - Hydraulic unit and barrel holder are missing

Power unit, diesel generator, diesel generator, container unit used INTERSCHALT Type: WD 1000-1500 N/2.3 Built in 1980 Rated power: 1050 KVA Power: 800 kW Voltage: 10000 V Frequency: 50 Hz Engine Mwm TBD602V16K 945 kW 1500 rpm Generator Siemens 1FG7633 Dimensions: approx. 12 x 2.4 x 2.6 m

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design -Clamping area: 1550 x 1000 mm -Table height: 730 mm -Plate thickness: 130 mm -Transport dimensions.: 1550/1000/H730 mm -Weight: 1550kg

Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE

rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

Cleaning plant for die casting emulsion, process wastewater treatment, waste water treatment used Manufacturer: VIBROCHEMICA / ROOS & Co Type: 1000 CA/1 Built: 2006 Power requirement: 1 kW Dimensions: approx. M The system includes the cloth belt filter / gravity filter with slitting system and tank, oil skimmer, collection tank with agitator and liquid detectors. The plant is used for the treatment of die-cast emulsion waste water and was in operation until the production site was completely dismantled.

Sensor-actuator distributor, distribution strip, distribution box, HV distributor, HV distributor -Manufacturer: Escherich, High Voltage Distributor -Type: 100082 (ES108) HVD-05 -Quantity: 2x distribution block available -Price per piece -Dimension: 130/120/H50 mm -Weight: 0.5 kg

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

Part No.: 42.35.53 // S. No: 3.278-870805-1 Equipment / Additional information Technical data and description: see pictures

Croissant winder Fritsch BCW 1000 tableside machine used table croissant wrappers from Fritsch Model BCW 1000 also suitable for cutting tables immediately available for sale in the warehouse in Bielefeld. -380 volts

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

description: Design : Cast resin transformer Design: Dry Make : SGB Built: 2010 Condition: New Btz0idkxtd Rated power: 1000 KVA Medium voltage: 10 KV +- 2 x 2.5% Low voltage: 400 V Switching group : Dd6Y 5 Frequency: 50 Hz Cooling type :AN Total weight: 2410 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 34/7 mm -Gratings: Hot-dip galvanized -Quantity: 1x grates available -Weight: 7 kg

Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Pcazz Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 310 mm -Total height: 70 mm -Struts: wall thickness 3/2 mm -Bridge height: 30/7 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 8,3 kg

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Weight: 64 kg

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Quantity: 7 pieces -Price per piece -Weight: 66 kg

Manufacturer: Arburg Type: 420 C 1000 - 270 Year of construction: 2007 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 2000 bar general Engine: 15 kW Heating: 6.4 kW Dimensions: 4.3 m x 1.6 m x 2 m Weight: 3880 kg Screen text: German Optional extras Core train x1 Robot interface