133,577 used machines on RESALE, but how to find them? Machine Search
clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power: ...
Screw diameter: 90 mm Injectable volume: 2740 cm3 Injection pressure, : 1920 bar Column passage: 1025 x 935 mm Shutter control 4 cores Robot interface 2 blow guns
2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023
Engel ES 2550/500 HL - V Hours - 114924 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.894 Maximum shot volume cm3/g 1193 Injection pressure maximum hydr/spec bar 2140 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 5000 Maximum opening stroke (distance between the platens) mm 1700 Minimum installation height mm 500 Distance between tie bars Horizontal mm not applicable Distance between tie bars Vertical mm not applicable Centering ring Diameter nozzle side mm 200 Centering ring Diameter ejector side mm 200 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufactur ...
clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 550 x 430 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 35 mm - Screw length L/D: 17.3D - Dosing stroke: 140 mm - Screw speed: 20 – 480 rpm - Moulding volume: 135 cm³ - Injection pressure: 1,065 bar - Increased injection pressure: 1,620 bar - Heating power: 6.8 kW - Number of heating zones (including nozzle): 4 Clamping unit: - Maximum clamping force: 450 kN - Platen dimensions: 550 x 330 mm - Extended clamping plates: 550 x 430 mm - Minimum mould installation height: 180 mm - Maximum plate spacing: 530 mm - Opening stroke: 350 mm - Control system: EC 100 Drive: - Pump drive power: 11 kW - Approx. weight: 3,300 kg - Dimensions: 3,300 x 1,200 x 1,800 mm Current oper ...
clamping force: 4.000 kN injection volume: 2480 cm³ screw diameter: 90 mm platen size: 1.300 x 1.080 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 90 mm - Injection volume: 2,480 cm³ - Maximum shot weight: 2,232 g - Injection pressure: 1,360 bar - Increased injection pressure: 1,600 bar - Heating capacity: 64 kW Clamping unit: - Max. clamping force: 4,000 kN - Clamping plates: 1,300 x 740 mm - Extended clamping plates: 1,300 x 1,080 mm - Minimum mould installation height: 350 mm - Maximum platen spacing: 1,300 mm - Opening stroke: 950 mm - Core pull unit: 2-stage on BAP - Control system: EC 100 Drive: - Pump drive power: 55 kW - Weight (clamping side) approx.: 25,000 kg - Weight on injection side (approx.): 8,000 kg Discharge ...
Key data: 27000 kN, 190 mm
incl. Viper Robot 90
Key data: 8000 kN, 90 mm
ENGEL DUO 5550/800 – 800 T Year: 2006 Operating hours: 20,600 h Clamping force: 800 t Screw diameter: 90 mm Distance between tiebars: 1,170 × 1,000 mm Opening stroke: 1,600 mm Mold height (min./max.): 500 / 1,100 mm Injection volume: 2,740 cm³ Injection pressure: 2,180 bar Options: Bi-metallic screw 2 hydraulic core pulls Robot interface Overhaul performed by ENGEL New pump
Engel 3 ES 7050 / 1 500 Duo built in 1999 against bid.
ENGEL ES 1350/275 HL ST injection moulding machine was manufactured in 1999 in Austria by ENGEL Austria GmbH. The machine is designed for the economical production of plastic parts in various shapes, colours and for various purposes. This process utilises the injection moulding method, which involves injecting plastified plastic into a closed mould, where the material cools and takes on the mould’s shape. The combination of a high clamping force of 275 tonnes with proven components ensures high efficiency even during demanding series production. The ENGEL ES 1350/275 HL ST is fitted with a 60 mm diameter screw, which is responsible for plasticising the material and precisely feeding it into the injection mould. The ability to operate at increased injection pressure enables the processing of more demanding plastics and the precise filling of moulds with complex geometries. To increas ...
ENGEL DUO 500 T type 4550/500 pico Force de fermeture : 500 T / 5000 KN Année : 2013 Nombre d’heures : 48 000 h Diamètre vis. : 90 mm Volume injectable : 2480 cm3 Entre colonnes : 830 x 915 mm Dimensions des plateaux : 1270 x 1260 mm Epaisseur moule min/max : 350/900 mm Ecart maximal entre plateaux : 1650 mm Dimensions : 7,80 x 2,40 x 2,36 m Poids : 14 T + 7 T
ENGEL 220 T Type VICTORY VC 1050 / 220 TECH PRO Année : 2015 Nombre d’heures : 35 250 h Diamètre vis : 60 mm Volume injectable : 603 cm3 Epaisseur moule mini : 300 mm Poids : 13 tonnes
Key data: 800 kN, 100 g/PS, 35 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence
ENGEL VICTOY 160 T Type: VICTORY 860/160 spex Clamping force: 160 T / 1600 KN Year: 2017 Number of hours: 36,900 hours Screw diameter: 55 mm Injectable volume: 508 cm3 Dimensions of the trays. : 750 x 750 mm Min mould thickness: 250 mm Dimensions: 5.80 x 1.70 x 2.40 m Weight: 8900 kg
inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible.
ENGEL VC 80/25 TECH injection moulding machine was built in 2004 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components used both in everyday products and in many industrial sectors. These components are produced using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL VC 80/25 TECH is an excellent solution for both single-unit and series production. The machine is equipped, among others, with a 22 mm diameter screw and a precision mould clamping system with a clamping force of 25 tonnes. Day-to-day operation of the injection moulding machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of in ...
ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increase the efficiency of the e ...
ENGEL ES 80/50 HL injection moulding machine was built in 1996 in Austria by ENGEL Austria GmbH. The machine is designed for the efficient production of plastic components used both in everyday products and in many industrial sectors. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL ES 80/50 HL features, among others, a 25 mm diameter screw and a precision mould clamping system with a clamping force of 50 tonnes. Day-to-day operation of the machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of injection moulding process parameters. All this is complemented by an extremely rigid design that maintains ...
Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: ap ...
used
Manufacturer: ENGEL Model: duo 1060H/330W/720 Combi US Type of Machine: Injection moulding machine 650ton Year of Manufacture: 2022 Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m, as recorded in source documents) - Weight 35000 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi, as recorded in source documents) - Cooling or heating water 4 (bar or psi, as recorded in source documents) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 800 kN, 30 mm
Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control: CC100 Year of Make: 2005 Hours: 76988 h Clamping force: 800 kN Plate size h x v: 670 x 600 mm Min. installation height: 250 mm Plate spacing max.: 700 mm Opening travel: 450 mm Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Machine including conveyor belt Machine including handling Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Machine dimensions LxWxH: 4.05m x 1.93m x 2.2m Total Weight: 5200KG Technical Data Handling Machine type : Linear handling Make: Engel Control: ER-HLI 31 VC Year of Make: 2005 Handling weight: 2 kg On-screen text: German Total weight: 250 kg
Key data: 900 kN, 22 mm
Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of Make: 2009 Hours: 70171 h Clamping force: 900 kN Panel size h x v: 740 x 680 mm Min. installation height: 300 mm Plate spacing max.: 800 mm Opening travel: 500 mm Screw diameter: 22 mm Displacement: 38 cc Spray pressure: 2060 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Air valve 2x Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Tool heater 4x Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total weight: 6700KG
AGFA AccuSet 1000 WE. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now
Sell large items Kentron quadrant 1000 PEEK. Material comes from corporate insolvency, in stock. Different batches. Delivery possible, shipping costs on request. Payment in advance. The post includes: Round material length 1000 mm each. 3 piece diameter 20mm 3 piece diameter 25mm 4 piece diameter 30mm 4 piece diameter 40mm
Rotary vane vacuum pump oel circulation lubricated Manufacturer: Busch Type: RC 1000 B Status: Generalueberholt Performance: 12 months Suction plugs: approx. 1000m3/h Final pressure: approx. 20 mbar
Raw steel DN 1000 wall thicknesses from 11.9-15.7 mm PE coated inside coated length: 1-3 m in short pieces 5-18 m long pieces Inside length 18 m coated steel pipes DN 1200 PE-jacketed
Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - is in very good condition and fully functional,- We have verified the function with a test. Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used – top condition - Lifting height Chain length 3.25 m Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or al ...
Height gauge, parallel gauge, height measuring device -Altitude gauge: Altimeter -Max. working height: 1000 mm -Dimensions: 280/160/H1100 mm -Weight: 7 kg
For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3800mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 8m Shipping worldwide Price per piece 8.500€ net plus VAT If you are interested, please contact us to confirm availability.
For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3800mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 8m Shipping worldwide Price per piece 8.900€ net plus VAT If you are interested, please contact us to confirm availability.
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN
used
Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours
average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...
CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC
Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Schaltgr. Dyn 5 Code: 9129 IP:23 Primary: 500 V 12A Secondary: 399/231 V 380/220V 361/209V 15.15A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg More items - new and used - can be found in our shop! International shipping costs on request!
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: Wuxi Madis, single-phase transformer type JBK3-1000VA -Power: 1000 VA -Technical data: see photo type plate -Dimensions: 150/150/H150 mm -Weight: 12.3 kg
Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: TGL, Manometer 0 - 0.1 bar, unused -Type: Ø 160 mm 0-1000 mmWs -Quantity: 1x pressure gauge available -Dimensions: 200/160/H100 mm -Weight: 2.7 kg/pc.
Key data: 1000 mm, 184 , 40
Screw diameter: 40 mm Displacement: 201 cm³ Injection weight in polystyrene: 184 g/hp Injection pressure: 2,000 bar Clamping force: 100 t 470 x 470 mm Tool installation height min.: 350 mm Opening distance: 350 mm CONTROL: Selogica Screen text: german / german Instruction manual: german / german Multilift H Core pulls: 2x Pump drive power: 22 kW Total connected load: 36.0 kW Total weight: 5,400 kg Machine dimensions L x W x H: 4.5 x 1.6 x 2.1 m m m Payment terms: 100 % before taking over the machine, net only
Key data: 1000 mm, 184 , 40
Screw diameter: 40 mm Displacement: 201 cm³ Injection weight in polystyrene: 184 g/hp Injection pressure: 2,000 bar Clamping force: 100 t 470 x 470 mm Tool installation height min.: 350 mm Opening distance: 350 mm CONTROL: Selogica Screen text: german / german Instruction manual: german / german Multilift H Core pulls: 2x Pump drive power: 22 kW Total connected load: 36.0 kW Total weight: 5,400 kg Machine dimensions L x W x H: 4.5 x 1.6 x 2.1 m m m Payment terms: 100 % before taking over the machine, net only
Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency an ...
Used Tetra Pak TBA-8 SQ 1000 ml filling lineTechnical Specifications & Performance DataThis complete aseptic carton packaging line centers on a Tetra Pak TBA/8-1000 SQ, delivering reliable performance for high-quality beverage production and industrial packaging applications. Engineered for 1.0L carton formats, the line integrates filling, capping, conveying, case packing, and shrink-wrapping functions to provide a cohesive used bottling line solution for second hand operations seeking dependable uptime and consistent output.Primary filler: Tetra Pak TBA/8-1000 SQ (aseptic) (3.862 working hours).Production speed: up to 5,000 packages per hourContainer type: Carton (Tetra Pak style)Format compatibility: 1.0L cartonsCapping unit: Tetra Cap Applicator 88 Lid (for Stream Cap closures) ( 7.709 working hours).Secondary packaging: Tetra Cardboard Packer TCBP-70Shrink tunnel: Tetra Thermo Shrink ...
A robust HEGLA VHG1000H vacuum lifter for the safe handling of heavy and large panel materials, such as glass or stone, is on offer. Max. load capacity: 1000 kg Weight: 108 kg Operating pressure: 6 bar Integrated pressure gauge for pressure monitoring Multiple suction cups for a secure hold The machine is in a used but fully functional condition. It shows common signs of wear, but these do not affect its reliability. The vacuum lifter is sold because the waterjet cutting machine has been sold.
WINDMÖLLER & HÖLSCHER Miraflex, 8 colors, gearless, Camera and inspection system recently renovated, Fast sleeve change, 4 motor per deck CNC position system, Computer supervision, Web width 1.050 mm., Print width 1.000 mm., Min print repeat 300 mm., Max print repeat 800 mm., Turret automatic unwinder and rewinder, Max reel diameter unwinder/rewinder 800 mm., Drying - 2 zones, 4 fans, 2 gas burners, Videocamera y.2024 with automatic quality inspection system, Corona treatment, automatic vyscosity control, Turboclean automatic washing system, closed chamber doctor blades, n.32 ceramic anilox sleeves : 10 x 400 L/cm- vol.3,5 ; 4 x 470 L/cm- vol.3,5 ; 4x 340 L/cm-vol.5,5 ; 2x 300 L/cm-vol.7 ; 2x 280 L/cm-vol.8 ; 2x 200 L/cm-vol.10; 2x 160 L//cm- vol.10; 2x 120 L/cm-vol.12 ; 2x 100 L/cm-vol.15 ; 1x 140 L/cm- vol 16,5 1x 60 L/cm- vol 20, N.260 print sleeves - 8 for each following repeats :m ...
APV Rannie Homogeniser – 1000 Litres Blue Top (220 Bar Pressure), Elevate your production capabilities with the APV Rannie Homogeniser, engineered for high-performance homogenisation at 220 bar pressure. This powerful homogeniser, with a capacity of 1000 litres, is a perfect fit for the dairy, food, and beverage industries, ensuring superior product consistency and quality., Features:, - High Capacity: Processes up to 1000 litres, tailored for large-scale applications needing reliable homogenisation., - 220 Bar Pressure: Delivers exceptional emulsification and particle size reduction, ensuring stable and high-quality end products., - User-Friendly Controls:Intuitive interface allows for precise adjustments to pressure settings, enabling customization for various product formulations., - Durable Blue Top Design:Built for longevity, the distinctive blue top reflects the machines robust c ...
used
Working width 1000 mm Still in operation: Yes Available: immediately
Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm
Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.
maximum number of results exceeded
please refine your search
