engel 1000 used for sale

Load traverse TAKRAF T 1 ( T1 ) Load capacity: 1000 kg used, tested ! Dimensions: 1300 x 200 x 600 mm

Hydraulic Cylinder REXROTH CD/t3/ME6/63/45/1000/F/11/B/1/1/H/HD/M/W/W/ 0010575970/0010 Stroke: 1000 mm Rod diameter Ø 45 mm New ! Dimensions: 1210 x 150 x 90 mm

Level lift, lift table, fork lift table, lifting platform WTT FÖRDERTECHNIK GmbH 414S load capacity: 1000 kg lifting fork 1050 mm long, width width: 840 mm stroke: approx. 680 mm height retracted: approx. 30 mm height extended approx. 710 mm electro-hydraulic lifting function 180 bar 380 V with foot switch mobile by 2 castors ! used, tested ! Dimensions: 1350 x 930 x 1350 mm (retracted)

Chain hoist with electric chassis, trolley HADEF TYPE 30 / 85 ( 30/85 ) Payload: 1000 kg Chain length: approx. 5 m Lifting speed: 1,1,00 5 / 6 m/min Travel speed: 4 / 16 m/min Beam width: approx. 100 - 180 mm Lifting motor: 0.37 / 1.5 kW Travel motor: 0.06 / 0.25 kW voltage 380 V 3AC 50 Hz cable length control bottle: approx. 3.0 m cable length power cord: approx. 20.0 m used, tested ! Dimensions: 600 x 600 x 450 mm

Chain hoist with chassis mechanical, trolley HADEF TYPE 11 / 77, 22 / 77, 19 / 90 ( 11/77,22/77,19/90 ) payload: 1000 kg chain length: approx. 4000 mm carrier mount adjustable: max 150 mm used, tested ! Dimensions: 720 x 560 x 270 mm

Sheet metal clamp, sheet gripper PAGUS KBH 1 ( KBH1 ) 1000 kg Gripping width: 10 / 25 mm used, tested ! Dimensions: 300 x 220 x 130 mm Weight: 5 kg

Round profile pliers TAKRAF ZR1 1000 kg Gripping width: 100 /250 mm used, tested ! Dimensions: 500 x 500 x 180 mm

Sheet metal clamp, plate gripper TAKRAF KBH 1 ( KBH1 ) 1000 kg Gripping width: 40 mm used, tested ! Dimensions: 220 x 190 x 130 mm Weight: 6 kg

Roller clamp, sheet metal gripper TAKRAF KR 1 1000 kg Gripping range: 0 - 20 mm used, tested ! Dimensions: 520 x 190 x 170 mm Weight: 10 kg

Roller clamp, sheet metal gripper TAKRAF KR 1 G 1000 kg Gripping range: 15 - 40 mm used, tested ! Dimensions: 520 x 190 x 170 mm Weight: 10 kg

Section steel pliers, profile iron gripper TAKRAF ZP 1 ( ZP1 ) Load capacity: 1000 kg Gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm

Tool cabinet, drawer cabinet PAGUS 390 x 340 x 935 (usable height) mm 8 drawers approx. 110 mm depth used ! Dimensions: 390 x 360 x 1000 mm

Height measuring and marking device digital, height ripper MITUTOYO up to 1000 mm 192-614 Dimensions: 1230 x 290 x 150 mm

Clamping plate, clamping table, machine table PAGUS Working area: 1000 x 290 mm Working height: 120 mm groove width: 12 / 22 mm New ! Dimensions: 1000 x 295 x 120 mm

Clamping table, machine table PAGUS Clamping surface: 1000 x 800 mm groove width: 22 / 39 mm with clamping claws ! Dimensions: 1160 x 970 x 505 mm

Pallet Turning Device FLOWER 2 x 1000 kg for Euro pallets 360° rotatable with locking to 0° and 180° Dimensions: 2200 x 1900 x 800 mm

Clamping cube, angle table PAGUS clamping surface1: 1000 x 750 mm clamping surface2: 1000 x 500 mm groove width: 22 / 37 mm groove depth: 38 mm used ! Heavy version Dimensions: 1000 x 750 x 500 mm

Welding table, straightening table, straightening plate, work table, clamping table straightening plate PAGUS 1000 x 800 mm without feet Dimensions: 1000 x 800 x 250 mm

Welding rod OERLIKON OE-2,000 5 Ni DIN 8559 ASME Sec.II/C/SFA-5.28 ER80S-NI2 Diameter: Ø 2.4 mm Length: 1000 mm Quantity: 24 kg New ! Dimensions: 1030 x 80 x 60 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate PAGUS 1000 x 630 mm Height: 860 mm Dimensions: 1000 x 630 x 860 mm

Abrasion protection made of leather HELU Ø 50 mm x 1000 mm 7009 00100 0004 7009 00101 0004 Length: 1000 mm inner diameter: max. 50 mm Material: leather New ! Dimensions(Package): 300 x 200 x 40 mm

Pressure gauge GAUGE PLANT BEIERFELD 1/BS20/2 0 - 100 MPa (0 - 1000 bar) TGL16374 Accuracy class: 1 Housing diameter: Ø 160 mm Connection thread: M20 x 1,1,00 5 New !' Dimensions: 200 x 160 x 55 mm

Heating expansion tank, membrane accumulator, pressure accumulator STÜCKLIN, PNEUMATEX 742 5040 Content: 1000 litres permissible Operating pressure: 6 bar permissible Operating temperature: 5 to 70°C diameter: 900 mm height: about 2200 mm

Electric cylinder, with swivel attachment PAGUS stroke approx. 1000 mm rod diameter Ø 115 mm, with extension: Ø 75, length: 200 mm rod eye: Ø 32 mm rod thread: M16 x 1.5, length: 32 mm flange diameter: Ø 155 / 180 / 250 mm, thickness: 17 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 12.5 mm 2x swivel pin: Ø 30 mm, length: 45 mm pivot pin spacing: 185 mm without drive ! used, tested ! Dimensions: 1890 x 275 x 250 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Work Table, Clamping Table, Welding Table, Machine Table GEORG 5400 mm Box profile: 160 x 90 mm Height: 760 mm Center groove over 8 profiles 40 x 25 mm Dimensions: 6350 x 1000 x 760 mm Weight approx. 4 ton

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table PAGUS Work surface: 1600 x 1000 mm Height: 770 mm used, tested ! Dimensions: 1620 x 1010 x 800 mm

Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...

Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Equipment: Agitator,Manufacturer: Holvrieka,Condition: used,Volume: 100,000,Bottom floor: flat bottom with slope,Design: upright,Diameter inside: 3,350,Cylindrical height: 11,500,Total height: 12,500,Wall thickness underbody: 4,Wall thickness upper floor: 3,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation,Outlet : 100,Note: slight adhesions,Remarks: Sloping floor with slope to the outlet (for installation a concrete foundation would have to be erected on site) Total height estimated according to the drawing (smaller

Equipment: Insulation,Manufacturer: Priamo Food Technologies,Condition: used,Volume: 100,000,Design: upright,Stand shape: Standing frame,Insulation: present,Insulating jacket: hermetically welded,Diameter inside: 3,600,Diameter outside: 3,810,Cylindrical height: 10,000,Total height: 11,454,Year of construction: 2019,Manhole / dome: in cylinder,Nameplate: Yes,Outlet: present,Remarks: Manhole Dimensions: 542 x 442 mm Outlet has been separated,last use: food, Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Heatable/coolable, Insulation,Manufacturer: Apparatebau Nordhausen,Condition: used,Volume: 100,000,Lower shelf: Cone floor,Design: hanging,Heating/cooling (filter bar): available,Volume double jacket: 615,0,Max. permissible Operating overpressure: 2.0,Temperature control cylinder: half-pipe coil,Insulation: available,Diameter inside: 3,190,Diameter outside: 3,440,Total height: 15,970,Technical documents: Drawing,Type plate: Yes,Equipment: Crane eyelets,Outlet: DN80 DIN 11851 ,Remarks: The double jacket (615 liters) is divided into a total of 4 chambers,Last purpose:

VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, Possible additions: horizontal loading screw and hopper + cyclone on top + collector with dust sleeves piping + bag holding structure+bag weighing station + PLC fo ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -

DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw

SATRIND DUAL-SHAFT HYDRAULIC SHREDDER K10/50, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.000 x 850 mm ca, 2 counter-rotating steel shafts, NEW Knives, Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, NEW electrical control panel with PLC and connection for remote assistance, inverter, alarms,, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 70 days ca, conditions: reconditioned, type: K10/50, Power: 37 kw

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Key data: 650 mm, 140 , 35

Screw diameter: 35 mm Displacement: 154 cm³ Injection weight in polystyrene: 140 g/hp Injection pressure: 2,429 bar Clamping force: 65 t Tool installation height min.: 250 mm Opening distance: 500 mm CONTROL: MC6 Screen text: german / german Operating instructions: german / german Core cables: 1 Pump drive power: 15kW Total connected load: 32.0 kW Total weight: 3,900 kg Dimensions L x W x H: 4.0 x 1.6 x 2.1 m Payment terms: 100% before taking over the machine, net only

Equipment: Insulation, agitator,Condition: used,Volume: 100,000,Bottom: Conical bottom,Lower bottom: Conical bottom,Design: upright,Insulation: available,Insulating jacket: welded,Insulation material: Rock wool,Insulation thickness: 50,Ground clearance: 900,Diameter inside: 4,000,Diameter outside: 4,135,Cylindrical height: 8,000,Total height: 10,830,Total width: 4,300,Total length: 11,000,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Crane eyelets,Outlet: DN65 DIN 11851 , Remarks: we can not guarantee the agitators,last use: food,material