engel 1000 used for sale

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive  ...

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive  ...

Year of manufacture: 2004 closing force: 500 t Columnless machine inspection possible video available top condition

Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658

Capacity 700 tones Distance between columns 8080cantimeter

ENGEL injection molding machine unit for sale. The unit is used for gas injection. The year of production of the device is 2006. We bought it with the machine but we never used it. It has been in stock since purchase. The device is practically new, unused. We have full documentation.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

Clamping force 120 tons. Ecodrive drive system -significant energy savings compared to a traditional drive. ! the control needs repair: an error occurs when the machine is turned on

ENGEL VICTORY 330/110 Tech Injection moulding machine Year manufactured: 2001 Photos attached

Engel Injection Moulding Machine With Robot Machine is in good working condition

Engel Victory 3550/500 tech Injection Moulding Machine Machine is without column Robot and dryer are not included in the price CC200 control system Number of working hour : 31 000

Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021

Injection moulding machine Manufacturer: Engel Model: ES 330 HL Year of manufacture: 2000 Capacity: 90 Tn Working hours: 50290 h

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm

Manufacturer: Engel Model: 100T / 310 E MOTION Year of manufacture: 2004 Capacity: 100 Tn

Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 bars Injectable volume: 3720 cm3 Lamination: 183 g/s Dosing stroke: 430 mm

INJECTION UNIT Screw diameter: 45 mm Pressure on the material: 2400 bars CLOSING UNIT Closing force: 1800 kN Mold thickness Mini / Max: 250/600 mm Passage between columns: 580 x 580 mm Tray size: 780 x 780 mm With 1 hydraulic unit

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw

Control Type: CC200 Screw length: 20D Closing force: 40 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 mm min./ max. mold height [mm] min 350 max 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 min./ max. mold height [mm] 350 - 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.

ENGEL DUO7050/500 (500 ton & 70mm screw)

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (Z): 1.400 mm - Stroke (Y): 800 mm - Stroke (X): 400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

Description Integrated robot: X: 1000 mm Y: 1400 mm Z: 2360 mm ROTATION 90 ° 1 BLOW (forceps) 2 EMPTY switchable

Description ROTARY TABLE: DIAM. 700 mm

Description Mold heating 32 zones MACHINE SOLD IN THE STATE IN WHICH IT IS Missing monitor and floppy drive Missing tabs: - 2 AR281 cards - 3 TT081 boards - 1 PS244 / A card - AS141 connector (for closing transducer)

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description SILICONE PRESS Complete with REINHARDT-TECHNIK LSR 200 silicone pumping unit year 1998

Description 13 zone mold heating working hours: 3447

Description increased floor

Description Rubber molding machine Working hours: 18.000

Description Rubber molding machine Working hours: 27.000

Description Rubber molding machine Working hours: 27.000

Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm

Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm