end used for sale

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

SOS Block bottom bag machine 2 plies photo cell for preprinted paper 4 colour tail end printer bottom patch and 1 colour tail end printer for bottom patch Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...

Price on request. FCA in our warehouse D-Bergisch Gladbach. Used Leroy Somer 1500 KVA generator end type: LSA52M7 in good working condition for sale. generator end: Leroy Somer type: LSA52M7 alternator weight: 3.9 to voltage: 400 V powerrating: 1500 KVA speed: 1500 r/min Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Description mobile height-adjustable Gura scissor roller conveyor 1200-425 2KUX from year 2009 Scissor roller conveyors are used in all areas of general cargo transport in operation. Especially when a permanently mounted system is not desired, this mobile variant is used. Own logistics structures can thus be optimally adapted and expanded as desired. The tracks are individually adjustable in length and height, at the same time curves up to 180 can be formed. – gloss-galvanized version – web top edge from 720 – 1150 mm height-adjustable. – For conveyed goods up to 425 mm – Axle distance with extended web 150 mm. – Rollers ( 50 mm) ball bearing on 8 mm axes – End stop at the end of the roll Number of support feet 3 pieces (+one extension) Web length 1600 – 5500 mm Load capacity/support foot distance 100 kg Roll material Plastic Rolls per axle 2 pieces Roller design Plastic

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.

Precision ball screw drive, KGT 40mm, Gewindelg 1735mm, Steinmeyer, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw / ball roller spindle with nut - Nominal thread diameter 40mm, pitch 10mm, - total length: 1920mm, 17kg, - ball screw length: 1735mm shaft end 1: 115mm lg - D22 x 40mm lg, thread M30 x 1,5 x 21mm lg, D30 x 54mm lg shaft end 2: 70mm lg - thread M25 x 1,5 x 20mm lg - D25 x 50mm lg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device  ...

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

Energy chain series E4.80, 10,5m, E4.80.45.200 Igus, new -50% We have set the lowest price for the new part on the market. If you have a VAT number, we will gladly issue you an invoice without VAT. Current new price € 2074 New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in its original packaging. - 94 chain links incl. 2 end pieces - Chain length 10,5m - Additional 6 end pieces - Additionally some chain links as spare parts - Energy chain can be opened on both sides - Width 500mm, height 108mm, - Inner width 450mm, inner height 80mm, - Bending radius 200mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device d ...

Replacement columns for die-casting machine OL1500, D250 x 5954mm, 250 x 12mm, Oleopress, used - overhauled Special price Attention: We only charge the current raw material price -10%: D 260 x 6m long = 2.550 kg x € 3,5 = € 8925 -10% = € 8032 In addition, we also have a new spar nut and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg

Replacement columns for die-casting machine OL1600, D250 x 5908mm, 250 x 14mm, Idra, new -50% Special price -50% from new price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 260 x 6m long = 2.550 kg x € 2,9 = € 7.395 If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg

76mm x 6mm Oto Mill HF Tube Mill Make: Oto Mill, Year New: 2005, Tube Diameter: 15mm – 76mm, Wall Thickness: 1mm – 6mm, Shaft Diameter: 100mm, Speed: 140 mpm, Direction :R-L. Double End Uncoiler with Coil Car, Crop Shear & TIG End Welder, Vertical Accumulator with 80Kw DC Drive, Forming Mill with Seven Forming Stands, and Seven Fin Passes, 110Kw DC Drive, and 70Kw DC Drive, Welding Section with 350Kw HF Thermatool Welder, Adjustable Sqeeze Box, Inside and Outside Scarfing Head, Bead Re-Winder, Cooling Section, Sizing Mill with Four Sizing Stands, and Four Fin Passed, Four Double Sided Turk Heads, 110Kw DC Motor, Friction Type Flying Cut-Off Saw with 74Kw DC Drive, Run Out Conveyor, and Table. Updated Electrics, LCD Display Controls, Hydraulics

Steel cables Wire ropes Slings made of steel Length: 20 m Diameter: 10 mm 1 end open / 1 end with safety eye hook Load capacity: unknown 2 pieces available

Nominal width: 750 mm Total length extended: 6,250 mm Total length inserted: 2,190 mm Conveyor roller, undivided, galvanized steel: 40 x 1.5 mm Roll division extended: 125 mm Smallest length of conveyed goods: 250 mm Number of double supports: Profile steel: 6 pieces Working height: 740 - 1,040 mm Swivel wheels End stop, lowerable (optional) at the acceptance end Partly with fixed plates diameter 125 x 36 mm Load capacity/linear meter 11 kg Scissors, profiled steel galvanized Paint supports: black matt

Hobart 305 GTP Dry Steam Fast Cooker Gentle, healthy cooking: steaming, steaming or blanching 3 different pressure levels 0 / 0.5 / 1 bar for individual adaptation to the food Extremely short cooking times Individual temperature program as standard: 50° - 99°C Electronically controlled program sequences Compact tabletop unit with built-in steam generator 1 cooking chamber for 3 x 1/1 GN up to max. 65 mm deep or 2 x 1/1 GN up to max. 100 mm depth or 1 x 1/1 GN up to max. 200 mm depth Multi-setting, the connection value can be reduced to 18.2 kW with hot water connection (power then approx. 550 servings/h) Automatic defrosting Water level controller with display Fully electronic control for time input Self-diagnosis with fault display Chamber pressure is displayed digitally Evaporation destruction with built-in wras condensation Automatic boiler emptying with drain pump a ...

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

core drilling diameter max.: 50 mm bore depth: 2000 mm swing diameter: mm drilling capacity diameter max.: 110 mm total power requirement: 30 kW weight of the machine ca.: 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features Machine consists of the following elements:  ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm Capacity 90° rectangular: 350 x 230 mm : 210 mm Capacity 45° rectangular: 270 x 200 mm : 170 x 170 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150 x 100 mm capacity 60 degrees: square: 100 x 100 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 2,0 kW weight of the machine ca.: 476 kg dimensions of the machine ca.: 1,73 x 0,77 x 1,46 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellent price-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (not BMSY 270 DGH ) • Hydraulic clamping of the horizontal vise • auto ...

Manufacturer ARPAC Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: PART ARPACK ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print an ...

Precision ball screw drive, KGT 50mm, Gewindelg 2670mm, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw /ball screw with nut - Thread nominal diameter 50mm, pitch 10mm, 4 turns, that means 40mm travel per turn of the nut, - Total length: 2930mm, - ball screw length: 2670mm Shaft end 1: 165mm lg - D32 x 35mm lg, thread M35 x 1,5 x 25mm lg, D35 x 85mm lg, D42 x 20mm lg Shaft end 2: 95mm lg - thread M25 x 1,5 x 28mm lg, D35 x 53mm lg, D42 x 14mm lg Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarante ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...

Valve terminal, valve assembly, 50E-F14GDQSERYKJUXUXIX….., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is € 4.450 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 44 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece linking block, CPX-GE-EV-S-VL, 8022170, 3) 7 pieces of in ...

Seitz Orion 60 x 60, combi filter, approx. 45 hl/p.h. for beer Type 60A180, EK part 59 EK stainless steel plates, 2 EK end plates KG part 14 KG stainless steel frame, 1 KG stainless steel end frame 1 diverting plate

Valve terminal, valve assembly, 50E-F14GDQSUXYKJNY…., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.680 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJ-D-UL1-EX1E, 32P-SGK-R-MASVAIIIU-7KL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 3 pieces of interlinki ...

Valve terminal, valve assembly, 50E-F14GDQSERYKJ-D-UL1-EX1E, Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.250 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 2 p ...

CNC milling machine ZX7124F table 900x230mm new/unused Description Was intended for project, but was never used. Private sale without warranty. Pick-up only: Mobile phone 015121271265 Table size 900 mm×230 mm T slot number spacing 3×14 mm The biggest hole diameter Ф20 mm End mill diameter Ф20 mm Spindle allowed maximum 150N.m Spindle speed 20~6000rpm The spindle taper BT30 The spindle end face to the 80~480 mm Spindle center distance to 300 mm The motor power 2.2KW Moving range (X, Y, Z) 500×280×400(mm) 12 Fast moving speed (X, Y, Z) 6000×6000×6000(m/min) Repeat positioning accuracy ±0.02 mm The feed motor power (X, Y, 4×4×7(N.m) Cooling pump motor power 0.09KW The power supply voltage 380V、50HZ The weight of the 1400 kg The environmental 0°C ~45°C

215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center  ...

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

63mm x 3mm Oto Mills HF Tube Mill Make: Oto Mills, Model: 552, Tube Diameter: 10mm – 63.5mm, Material Thickness: 0.8mm – 3.2mm, Line Direction: Left to Right. 10,000Lb Double End Uncoiler & Coil Car, Automatic Coil Joiner, Vertical Accumulator, Coil Straightener, Forming, Fins, Sizing Sections, 70mm Shaft Diameter, Three (3) 100HP Motors and Drives, Coolant Section, 30Kw Thermatool HF Welder, Three (3) Turk Heads, Spare Rafted Stands, Run Out and End Tables, Tooling

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

devapo Junior 40 convection oven Devapo's HotAir convection ovens are specifically designed for food/ingredient heating and baking and bake-off products. This version is equipped with a highly functional and customer-friendly operation. Two operations (selection of the desired preparation time and temperature) achieve a guaranteed and consistent end product. HotAir grille included Optical hard film display with LED illumination On/Off/Open switch Stepless temperature adjustment switches End signal Advanced Airflow System Knob Tilt protection Special thermal insulation Robust certified construction technology Service-friendly control cabinet Removable ventilation plate Made entirely of stainless steel Self-ventilating door Electrical connection values 400 VAC 50/60 Hz 3/N/PE Power 10,3 kW Capacity single serving bowl 225 x 175 x 35 mm / 250 x 190 x 45 mm: 40 Capaci ...

devapo Junior 28 convection oven Devapo's HotAir convection ovens are specifically designed for food/ingredient heating and baking and bake-off products. This version is equipped with a highly functional and customer-friendly operation. Two operations (selection of the desired preparation time and temperature) achieve a guaranteed and consistent end product. HotAir grille included Optical hard film display with LED illumination On/Off/Open switch Stepless temperature adjustment switches End signal Advanced Airflow System Knob Tilt protection Special thermal insulation Robust certified construction technology Service-friendly control cabinet Removable ventilation plate Made entirely of stainless steel Self-ventilating door Electrical connection values 400 VAC 50/60 Hz 3/N/PE Power 10,1 kW Single Serving Bowl Capacity 225 x 175 x 35 mm / 250 x 190 x 45 mm: 28 Servin ...

devapo hotAir Midi 12 convection oven Devapo's HotAir convection ovens are specifically designed for food/ingredient heating and baking and bake-off products. This version is equipped with a highly functional and customer-friendly operation. Two operations (selection of the desired preparation time and temperature) achieve a guaranteed and consistent end product. HotAir grille included Optical hard film display with LED illumination On/Off/Open switch Stepless temperature adjustment switches End signal Advanced Airflow System Knob Tilt protection Special thermal insulation Robust certified construction technology Service-friendly control cabinet Removable ventilation plate Made entirely of stainless steel Self-ventilating door Electrical connection values 230 VAC Capacity single serving bowl 225 x 175 x 35 mm / 250 x 190 x 45 mm: 12 pieces Capacity portion trays 160  ...

devapo hotAir Midi 18 convection oven Devapo's HotAir convection ovens are specifically designed for food/ingredient heating and baking and bake-off products. This version is equipped with a highly functional and customer-friendly operation. Two operations (selection of the desired preparation time and temperature) achieve a guaranteed and consistent end product. HotAir grille included Optical hard film display with LED illumination On/Off/Open switch Stepless temperature adjustment switches End signal Advanced Airflow System Knob Tilt protection Special thermal insulation Robust certified construction technology Service-friendly control cabinet Removable ventilation plate Made entirely of stainless steel Self-ventilating door Electrical connection values 230 VAC Capacity single serving bowl 225 x 175 x 35 mm / 250 x 190 x 45 mm: 18 pieces Capacity portion trays 160  ...

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Oto mills 127mm x 5mm HF Tube Mill with Packaging Line Make: Oto Mills Year New: 2000 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Material Strength: 360 – 510 MPa Tooling: 17 sets, Round, Square, Rectangular Entry Coil Car Floor Standing V-Type Design Powered Traverse & Lift Mandrel Uncoiler Powered Expansion Powered Hold – Down Roll Sliding Base Feed-Up Motor Shear & End Welder TIG Power Supply Mechanical Shear Driven Pinch Rolls Coil Straightening Machine Horizontal Accumulator Entry & Exit Pinch Rolls Coil Feeding Unit Variable Speed Drive Forming Mill Shaft Diameter: 80mm Eight (8) Forming Stands Seven (7) Side Forming Stands Horizontal & Vertical Stand Adjustment Individual Gear Boxes Universal Drive Variable Speed DC Motor Drive 300Kw High Frequency Welder 3-Roll Adj ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

Vacuumatic Cuti strip inserter; good condition; cleaned and tested; Lance 600mm; Stand 150cm; Connection cable for direct connection to end devices; optionally with laser sensor for free use. Tab inserter Vacuumatic Cuti; good condition; cleaned and checked; chute lenght 600mm; tripod 1500mm; cable for connection to end device; option with laser sensor for stand alone.

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: L 260 mm capacity 45 degrees: square: L 250 mm capacity 90 degrees: flat: L 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm capacity 45 degrees: round: R 200 mm capacity 45 degrees: square: R 180 mm capacity 45 degrees: flat: R 200 x 160 mm saw band length: 3650 x 27 x 0,9 mm cutting speed: 40 / 80 m/min total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,640 t dimensions of the machine ca.: 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New ve ...

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

Tool holder, milling holder, milling tool -Adjustment: SK50 -Shell end mill: MK5 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 6 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Shell end mill: MK5 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 6 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Shell end mill: MK3 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 3 kg

Thin-cutting frame saw ORBIT Plus . The ORBIT Plus thin-cutting frame saw uses a new method of up/down movement of the saw frame for slat production. During the downstroke of the saw frame, the cutting process is absolutely straight. At the lower end of the stroke, the saw frame swings out of the cutting process in the direction of the wood feed. As soon as the saw frame has swung out of the cutting process, the upward stroke begins, whereby the saw frame remains swung out to the upper end of the stroke and does not come into contact with the wood. Use: parquet and technical floors, doors, windows, stairs, furniture, musical instruments, pencils, sports equipment (skis, snowboards, hockey sticks), wooden packaging for fruit and vegetables, etc.

This unit is a filling and closing machine for metallic, aluminium tubes. The construction principles, materials used and innovative concepts guarantee maximum productivity, user friendliness and quality, making this machine an ideal solution for the pharmaceutical and the cosmetic market. Special consideration was given to a rapid change over to different tube sizes and consistency of filling product. The in-built flexibility makes it the ideal machine for use in research and development. Easy to use machine with excellent access for cleaning and maintenance. Technical data: Length mm 1825 Width mm 1115 Height mm 2150 Net weight Kg 2200 Production characteristics: Tube diam. min-max 10-52 mm Tube length min-max 52-250 mm Dosage min-max 2,5-500 ml Production capacity 40-120 tubes/min Automatic tube filling machine equipped with heated funnel, agitated hopper and 14 ...