141,128 used machines on RESALE, but how to find them? Machine Search
Envelope Tenoning Machine Bacci TSG 2T Spindle speed 6000 rpm Maximum trunnion width mm 115+2R Trunnion depth: 10 – 45 mm Table upwards, tilt angle: 0° – 15° Table tilt downwards: 0° – 30° Table side inclination angle: 0° – 20° Machine Weight 1050kg Machine dimensions 1500x1150x1350mm
An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
wire diameter 2-10 mm spring diameter 120 mm legth of springs 10 - 240 mm
For aluminium and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material tensioners Automatic feed Minimum quantity spraying Weight: approx. 200 kg
Milling cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stroke between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Pneumatic material feed via foot switch Weight: approx. 280 kg
IRLE IRD 1600 CNC End Machining Machine Manufacturer: IRLE Type: IRD 1600 CNC Year of manufacture: 2004 Control: max. Ø to be machined 1,625 mm min. pipe diameter to be machined 406 mm max. pipe length to be machined 13,200 mm min. pipe length to be machined 6,000 mm min. pipe wall thickness 12 mm max. pipe wall thickness in copying approx. 40 mm max. pipe wall thickness to be machined in CNC operation 70 mm max. pipe weight to be picked up 250 KN Height between hall corridor and pipe inlet 800 mm Total length of the machine approx. 24,000 mm Total width of the machine approx. 4,100 mm Total height from floor to upper edge of vise 5,000 mm Machine weight approx. 700 KN 01 - Intermediate bed with travel drive Bed length approx. 3,950 mm Bed width approx. 1,800 mm Bed height including chassis approx. 600 mm Travel speed on the foundation rails 500 - 5,000 mm/min. 01 - Inte ...
workpiece length: 2000 mm max. workpiece diameter: 400 mm min. workpiece diameter: mm bore spindle turning speed range: 260-1850 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: 2008 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - cooling installation - cutter quick change system
Year: 2003 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - variable milling angles - turret stop for milling depth adjustment - cooling system - quick cutter change system
LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H
Centering machine for preparing axes to be machined on lathes such as Schaublin, Emco etc. The centering is automatic according to the diameter of the parts. Satisfactory condition, belt to be changed. Three-phase motor.
Double end tenoner with two opposing machining sides on a common base. Equipped with chain feed tracks, upper hold-down assemblies, circular saw and milling units, extraction hoods and an adjustable machining side on transverse rails. Push-button controls with emergency stop. Celaschi documentation included. Auction-ID: A1-50699-36
Used Steton tenoning machine for window and door frames. Equipped with a disc shaft for scoring, a horizontal up-down shaft for tenoning (4 kW - 380 V) and a vertical shaft for profiling, rebating or tenoning (4 kW - 380 V). Full technical inspection carried out by our specialised technical department. Fully technically checked, delivered with new machine warranty Auction-ID: A7-50988-17
Heavy-duty end-milling machine for aluminium profiles, corresponding to the Hermis NR model. Equipped with a 2 HP motor, rotating vice, quick tool change, automatic spray lubrication, two pneumatic vices and a transparent safety guard. Auction-ID: A7-50988-15
18014646 Auction-ID: A7-51314-489
HERMIS NR end-milling machine for aluminium profiles, display (showroom) model, reference N002/0961. Heavy-duty type with quick tool change. Has a vice that rotates in degrees and changes positions. Powerful 2 HP motor, automatic spray, two air vices for holding the profiles and a transparent safety guard. Technical specifications: Motor 2 Hp. Max. stroke 410 mm. Speed 3000 rpm. External dimensions 600 x 900 x 1200 mm. Weight approx. 100 kg. Display model, delivered with new machine warranty Auction-ID: A7-50988-14
Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures
maximum number of results exceeded
please refine your search
200 € 
