We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,593 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - Doors ...
used
• Stroke: 235 mm • Piston diameter: 40 mm • PPV: pneumatic damping, adjustable on both sides • Installation position: any • Twist protection by square piston rod • How it works: double-acting • Operating pressure: 0.2 - 12 bar • Ambient temperature: -40°C to 80°C • Type of fastening: with internal thread and accessories • pneumatic connection: G 1/4 • maximum torque of the twist protection: 1.1 Nm • Impact energy in the end positions: 0.2 J • Operating medium: COMPRESSED air according to ISO 8573-1:2010 [7:4:4] • Oiled operation possible (required in further operation) • Attachment to the piston rod: M 12 • Note: Goods are unpackaged but as good as new! • 6 pieces are offered, these can be purchased individually as well as in a package! The price refers to the unit price! (Changes and errors to technical data and prices reserve ...
used
Used autoclave PANZER, type: 500E -completely refurbished- Electric autoclave with 500 litre boiler volume, with quick release and threaded spindle - Made in Germany - Completely made of high-quality stainless steel - All safety equipment (the latest requirement of the Pressure Vessel Ordinance) - Seemtl. Safety equipment such as safety valve, pressure gauge, overheat protection, steam drain valve, safety outlet valve, etc. - Construction and pressure testing included by TÜV - Including all necessary certificates - Full car. Control by F-value controller - Full car. Control of operating temperature, core temperature, pre-selection and operating time clock - Content: 500 litres - Heating type: Electric, 36 kW, 400 V - Operating pressure: up to 2.5 - 3.0 bar - Temperature range: Up to 130°C - Dimensions: B 1,200 x H. 1,150 x D 1,450 mm - Boiler diameter: 890 mm - Boile ...
Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use
used
Batch mixer with quick discharge bomb bay door 15° the length of the drum. Painted mild steel Steel blade (ploughshare) mixing tools Large feed chute with free shaft end without drive unit (suitable for 50-80 rpm with 55-132 kW) 3 inspection openings on the front of the drum Machine will get complete service
used
SOS block bottom bag machine 1 ply photo cell for preprinted paper 4 colour tail end printer Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm
used
Autoclave, Autoclav, Impregnation Chamber Overpressure Chamber Used Type: HP 2166-68 Volume approx. 6.8 m3 Length inside approx. 5 m Diameter inside approx. 1.5 m Large door on the end side approx. 1.5 m in diameter Max temperature: 140°C Pressure max 10 bar Dimensions outside approx.: 5600 x 1800 x 2500 mm 6 pieces in stock The autoclaves are used for sterilization of equipment, tools and materials. They can be used in the chemical industry, medicine and also in the processing industry for vulcanizing tires and rubber products or for printing impregnation. The system is completed according to your wishes by our own special machine construction. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm
used
SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm
used
Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).
used
10.500 volts A.C generator was driven by a Solar centaur 50 gas turbine in good running condition with 5000 KVA from 1992 for sale. A.C alternator is stored in our warehouse Bergisch Gladbach. generator end: A.C Generators typ: LSA 56.L84P voltage: 10.500 powwerrating: 5000 KVA rpm: 1500 r/min manufactured: 1992 weight: 13.6 tons price: 40.000€ FCA Price: 40.000€ FCA free loaded in our warehouse D-Bergisch Gladbach. Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de
used
Dear’s Sale, BMZ Man B&W 6S26MC built 1990 engine spare parts Liner, conrod, piston head, jaket, end rod, filter, turning gear, piston etc…. Best Regards Info@kscege
new
OSTAS ROUND BENDING MACHINE TYPE 4R OHS 2070 X 220 -4 wheels -Capaciteit 2070 x 10 -Aanbuig capaciteit 2070 x 8 -Roll Harde -Diameter boven rol 220 mm -Diameter or rol 220 mm -Diameter zij roll 180 mm -Hydraulic -Digital uitlezing voor beweging left rol -Digital uitlezing voor beweging middelste or rol -Digital uitlezing voor beweging right rol -Uitklapbaar Boven rol is hydraulically -Stalen constructie ST-52 -Hydraulic drop end voor eenvoudige rolpositionering -Hydraulically op en neer bewegingssysteem met middelste-en zij roll -Hydraulic balanceringssysteem -Overbelastingsbeveiliging -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...
used
M. No.: 879662 Equipment / Additional information: Flow rate: 80 m3 / h Compression end pressure: 0.6 bar Motor power: 3.0 kW / 1450 / min.
used
M. No.: 618416 Equipment / Additional information: Flow rate: 8 0 m3 / h Compression end pressure: 0.6 bar Motor power: 3.0 kW / 1450 / min.
used
Shelves for shelves, SSI Shepherd R3000 / R4000, depth 30cm, 40cm, 50cm, 60cm and 80cm, width 1m and 1.28m - used - : Width approx. 1m Price per piece: 40cm = 5.-€ (net) 50cm = 5.-€ (net) 80cm = 8.-€ (net) Width approx. 1.28m Price per piece: 40cm = 7.-€ (net) 50cm = 7.-€ (net) 60cm = 8.-€ (net) Manufacturer: SSI Schäfer Type: R3000 / R4000 Year built: unknown 30cm x 1m x 3cm height= 547 pieces (there is also a larger post in it) 50cm x 1m x 3cm height= 989 pieces 50cm x 1.28m x 3cm height= 38 pieces 60cm x 1m x 3cm height= 16 pieces 60cm x 1.28m x 3cm height= 512 pieces 80cm x 1m = a larger post comes in Payloads per shelf: 1m = min. 100kg 1.28m = min. 150kg Condition: good Available: from approx. Mid / end of October 2020 Location: Frankenberg Camp (Saxony)
used
AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper
used
Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration machine in mint cond ...
used
Shrink packer film only Gampack type 50 P with shrink tunnel, bottles infeed right Built in 2006, Siemens S7 control, up to 40 cycles per minute, Machine suitable for PET bottles in 3 x 2 packs. Was in production until end of January 2019. Dismantled and stored See video link. Available immediately.
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg ...
new
High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx. ...
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...
pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...
used
single-sided edge banding machine with pull-out workpiece support, end trimming unit and combi-unit. Power consumption: 400 V / 50 Hz / 3 pH / 7 kW Compressed air supply: 6 bar Dimensions: approx. 4,000 x 1.300 (1,780) x 1520 mm Edition extendable to 800 mm Working height: 820 mm Roller plate ø 700 mm
used
TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...
pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...
used
Layers of filter plate filter SEITZ with hydraulic pressure motor Type. 60B 100 SEITZ OF ONLY NOLL Serial No.: 80035 Year of construction: 1984 The dimensions and weight: Height: 1220 mm Length: 4050 mm Width: 830 mm Weight: kg filter plates: 99 x filter plates & 2 x end plates made of stainless steel approx. 600 x 600 mm thickness: 10 mm
We sell large post steel raw DN1200, coated on the outside, coated on the inside, wall thickness 20mm, lengths up to 12 m, To this end, we also have new arcs, different degrees.
used
Complete PET line Blower KRONES Kombi 8 Cavities Pressure filler 60 valves KRONES Labeling machine KRONES Hot glue paper labels Handle applicator COMAG Palletization ACMI Pallet wrapper PIERI The system is set up in 5 formats The plant is still in operation until the end of 2019 Capacity of the system 12,000 B/H at 1.5 lt bottles Built 2003-2009
used
J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...
used
10 units configuration: unit 1 + drying unit + unit 2 + unit 3 + unit 4 + drying unit + unit 5 + unit 6 + coating unit + extended delivery Komorimatic with Technotrans Alpha C, S-APC, PQC, rollers-and blanket wash up device, without impr. cylinder wash up device, Anilox coating unit, extended delivery, ink temperature control, Antistatic device, Special device for printing plastic in feeder, UV rollers, ink agitators, 4 x IST UV interdeck dryer with 1 lamp each, all 4 drying units have 2 interdeck positions each, IST UV end dryer in delivery with 2 lamps
used
Used rotary ovens W&P, Type: Rototherm REC 1280 -In bakery condition- Built in 1997 or 1994 - for trolleys 80 x 100 cm - Petrolium heater - incl. 1 pcs. trolley per oven - used in the bakery until the end - Condition: Good, well maintained El. Connection: 380 / 220 V, 50 Hz, 104 kW Baking space: 12.6 m2 Petrolium throughput: 9.0 kg/h There are 2 pieces available. Delivery costs on request. Inspection and test run are possible on request.
used
Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty
new
OSTAS ROUND BENDING MACHINE TYPE 4R OHS 1570 X 200 - 4 rolls - Capaciteite 1570 x 9 - Geharde rolling - Diameter boven rol 200 mm - Diameter onder rol 200 mm - Diameter zij roll 180 mm - Hydraulic - Digital uitlezing voor beweging left rol - Digital uitlezing voor beweging middelste onder rol - Digital uitlezing voor beweging right rol - Boven rol is hydraulic uitklapbaar - Stalen constructie ST-52 - Hydraulic Drop-End voor eenvoudige rolpositionering - Hydraulic op en neer bewegingssysteem met middelste- en zij roll - Hydraulic balanceringssysteem - Overbelastingsbeveiliging - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Bottle cleaning machine Double-end Manufacturer: Krones, Type: Flamatic KDF 246-500-42-110 , Built: 1991, Power: 44,000 Fl/h, Bottle size: 56- 95 mm, length 240 -340 mm. Overhauled, with warranty
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used Alpine wet agitated ball mill 90 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close cir ...
used
Machine for chamfering of HSS and segment circuit saegen - Saegeblatt: 80 - 910 mm - Grinding wheels: 200 x 32 mm - Weight: approx. 1800 kg - Full cladding - integrated wet grinding device - Signal lamp for displaying the end of work - Halogen lamp - Central lubrication - Accessories - Operating instructions
new
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...
used
Sell a used 3D printing system, Manufacturer: 3D Systems, Type: ProJet 3510 SD 3D Printer, Printing mode: High definition, nice space (xyz): 298 x 185 x 203 mm, resolution ( xyz): up to 375 x 375 x 790 DPI/ 32 layer thickness, accuracy (typical): 0.0025 - 0.05 mm each 25.4 mm of partial dimension, email notification: yes, remote monitoring: yes, uvm Build Hours 953h In addition, a CAD program: 1 pc. Solidworks Network Installation FEE. 1 Liz. Solidworks 2015 Standard 3D â CAD. 1 Liz. Solidworks Professional 3D â CAD. 1 pc. MoldWorks + SplitWorks + ElectrodeWorks. 1 Liz. Solidworks Plastics Standard. SUB End of April 30, 2017
used
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price
used
With built-in compressed air refrigerant dryer. Refrigerant R 404a. Variable speed drive. Volume flow 5.46 - 30.9 m3 rpm. Air end refurbished at 37920 working hours.
used
Condition needed Element Length Element Width Surface Drive Missing Parts Head conveyor 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft, 2 x rollers Congestion conveyors 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2060 1060 lacquered n.a. no 2000 1060 lacquered n.a. 1 x roller 2060 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquer ...
used
Oil-free. Water cooled. Variable speed drive. Volume flow 4.5 - 15.5 m3/min. at 7.0 bar. With built-in compressed air refrigerant adsorption dryer. HP air end 1x replaced. With energy recovery.
new
NEW - Unused stock from industrial hall packed in original wooden box Offer valid for acceptance of 115 pieces - partial quantities possible Manufacturer: Coat plates with ventilation slots aluminium natural, upper ribbed and lower end part made of cast aluminium. Aluminum reflector open, removable. VG with thermal protection element and. if necessary, ZG with automatic shut-off installed. 4 Cable entries M20. Connections inside, large side connecting door. Central threaded bolt M10 for ceiling sheet or hanger. Lamp: HST-DE, 400 W Number of lamps: 1-lamp Material of the housing: Aluminium Case color: Aluminum Lamp power: 1 x 400 W System power: 440 W Protection class: I Degree of protection (IP): IP20 Control unit VG, Length: 536 mm Width: 536 mm Height: 692 mm max. weight: 13.8 kg 230 V - 240 V AC
used
Variable speed drive. Volume flow 2.0 - 14.68 m3/min. Air end 1x replaced. With energy recovery.
used
CAST FILM EXTRUSION LINE SML winding unit This production line was professionally dismantled in 2017 Designed for COEX- cast foil production. Processing of thermo plastics in a temperature range of 150-300°C. The system can be operated with the following combinations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output max. 900 kg / h Main extruder: 105/33 L / D max. 650kg / h Extruder CO .: 90/33 L / D max. 250kg / h Foil width NET: 800-1400 mm Thickness: 25-530 µm Production speed 8-150m/min Roller width: 1600 mm Max. Roll weight: 2000 kg Version with Airnife and vacuum box One gravimetric dosing device with 3 stations per extruder Each extruder is equipped with a melt pump and a 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-cont ...