We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,255 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: capacity: 25.00 kVA connection: 380 V motor brand: Ricardo engine power: 20 kW generator brand: Ac generator generator type: Vg-184-g generator capacity: 33 A hours read: 0 manual available: yes description: unused, frequency 50hz , standby power , 72 liter tank , 3-phase 4124 Approx. Onsite Dimension. (l x w x h): 2,000 x 850 x 1,150 mm, weight approx.: 710 kg
used
Description: capacity: 35.00 kVA connection: 380 V motor brand: Ricardo engine power: 28 kW generator brand: Ac generator generator type: Vg-184-g generator capacity: 53 A hours read: 0 manual available: yes machine weight: 710 kg overall dimension L: 2000 mm overall dimensions B: 850 mm total dimension H: 1150 mm description: unused, frequency 50hz , standby power , 72 liter tank , 3-phase 4123 Approx. Onsite Dimension. (l x w x h): 2,000 x 850 x 1,150 mm, weight approx.: 710 kg
used
Description: capacity: 15.00 kVA connection: 380 V motor brand: Ricardo ZH2105D motor power: 12 kW generator brand: ac generator generator type: vg-164g generator power: 33 A hours read: 1 manual available: yes description: frequency 50Hz standby power 14.52Kva/13.2Kw 59 liter tank 3phase 4125 Approx. Onsite Dimension. (l x w x h): 1,750 x 900 x 1,150 mm, weight approx.: 650 kg
used
Description: capacity: 50.00 kVA connection: 380 V motor brand: Ricardo ZH4105ZD engine power: 40 kW generator brand: ac generator generator type: vg-2240 generator capacity: 76 A hours read: 1 manual available: yes description: frequency 50Hz standby power 14,52Kva/13,2Kw 99 liter tank 3-phase 2 batteries 4122 Approx. Onsite Dimension. (l x w x h): 2,150 x 920 x 1,200 mm, weight approx.: 900 kg
used
frequency: 50 Hz volt: 400 V speed: 1500 m/min rated capacity: 63 kVA weight of the machine ca.: 1189 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: with a total of 10 end devices Approx. Onsite Dimension. (l x w x h): 600 x 800 x 200 mm, weight approx.: 15 kg
used
Key data: 160 KW, 200 kVA, 400 V
Diesel Emergency Generator Type PDH16N with generator 6S160PN 200 kVA, 160 kW, 400V/3Ph/50Hz Built in 1971, only 772 hours run, mainly used in a hospital as an emergency generator
used
Emergency generator Bruno, 150 kVA, 400 Volt, YOC 2011, Genrator Leeroy Sommer LSA 442M95, engine John Deere CD6068
used
Electric screwdriver, built-in screwdriver, screwdriver DESOUTTER Rod screwdriver for screwdriving technology Type: EME 35-20J Torque range: 4.0-15 Nm Speed: max. 2067 rpm Output: 3/8 bit recording Attachment extension: M6 - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 90 x 60 x 950 mm Weight electric screwdriver with mounting device: 4.3 kg good condition; used
used
Labelling machine,EME type 4000,for self-adhesive labels.
used
Labelling machine,EME type 4000,for self-adhesive labels.
used
Labelling machine,EME type 1250,with belt conveyor,W 300 x L 1300 mm.
used
Labelling machine,EME type 1200,with band conveyor W 290 x L 2000 mm.
used
Labelling machine,stainless steel,EME type 1200,for top/side labelling,max label height 200 mm.
used
Labelling machine,stainless steel,EME 4120,for side mounting of label
Labelling maschine,EME type 1120,for self adhesive labels,mounted in cabinet.
used
Stock # U825V Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to ...
used
Generator EME DRS 200/10-8 Year: 2005 115 V 52.2 A 107 Hz Shaft diameter: Ø 40 / 45 mm New Dimensions: 730 x 460 x 470 mm
used
Scania AT-Motor DC12 pump nozzle c.350Kw completely ready for installation without starter+alternator-for emergency power +CHP applications. info@miw-zeven.de
used
21-32-131 Electric - hydraulic U-lifting table NH HTF-U New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg. Price: 1860 EUR Buy three or more – PRICE: 1695 EUR (EXW Jonava, Lithuania) Dear Customers, We invite you to visit our store Jonava. Currently used to present the largest exhibition of woodworking tools in the Baltic countries - your store have more than 300 installations. Our team is always ready to help you find the right equipment. JSC Medienos ...
used
We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB
used
BHKW in container with Cummins diesel engine Lorey Somer generator 250KVA 1500U / min 50 hertz Storm Steuerung, arrangement is equipped with emergency cooler zusaetzl. regularly waited to zeit 21000 company hours. arrangement is operational and available immediately. for other questions I stand to them to verfuegung under 01727265324
new
For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Power 5, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 25 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roll diameter 800 mm - weight of the machine approx. 2500 kg - noise level < 80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand Guard - color machine/Cabinet - RAL 7035 (light grey) guard - RAL 1028 (melon yellow) machine immediately available Price and further details on request
used
Conversion control for exenter presses , Press Safety Control Replaces old Preventa controllers ( OTR SEZ ZBS ) Control New manufactured on customer request, for a 63 to Weingarten, Control designed for drive 6 KW .od. Schuler / Weingarten / Heilbronn / Ruhrmann / Helmerding Ready to connect . Checked. Motor Connect, Two-hand console Connect, FootSwitch Connect, Emergency Off Circle and Safety Valve Connect. Press into operation . Advice on conversion, UVV acceptance. Additional variants possible. email info@pradler Recognized maintenance technician Pradler Machine Service email info@pradler Tel: 05242/43186
used
Rittal enclosure with built-ins, 160A switch, Terminal and Rittal carrier, such as on photos. Height 2000 + 200 mm socket, switch, door controls. Width 1200 depth 600 mm Including Siemens Sitop Power20 (24V 20A).) Incl. Rittal track system with 15 x DO2 63A. Div. contactors and mushroom emergency stop relay (2 x) Price for a cabinet (2 PCs available) 420 NET Contact: 0170 / 2204056 or fa.raupp@t-online
used
1 post PILZ safety relays, a total of 46 units, consisting of: 1.Pilz PNOZ1 (for emergency stop and protection doors), ID 475695: 5 piece 2.Pilz PNOZ (for emergency stop and protection doors), tag 474695: 5 piece 3.Pilz PNOZ 5(NOT-AUS-Schaltgerät), tag 474590: 1 piece 4.Pilz PNOZ 8 (for emergency stop and protection doors), tag 474760: 1 piece 5.Pilz PNOZ X 2.1 (for emergency stop and protection doors), tag 774306: 1 piece 6.PILZ PNOZ X 2 (for emergency stop and protection doors), tag 774303: 1 piece 7.Pilz PZE 9 (contact expander module), tag 774150: 5 piece 8.Pilz PZE X4P (contact expander module), ID 777585: 1 piece 9.Pilz t &AMP; a 5V (guard door monitoring), tag 474965: 1 piece 10.Pilz PNOZ X 7 (for emergency stop), tag 774059: 1 piece 11.PILZ PNOZ X8P, tag 777760: 5 pieces, (for emergency stop, safety doors and light barriers) 12.Pilz PNOZ X3P, ident 777310: ...
used
If you are interested we will send you photos! MACHINE DESCRIPTION: The MAS tray packer is a packaging machine that folds and glues an open tray (from a cutting) around the product formation. FORMATION: The machine sets 2 x 5 = 10 Tetra packs per tray. Machine dimensions: 3500-4500mm long depending on infeed conveyor. 2008mm width; Height 2000mm Performance: max 10 trays/min Electrical connection: 5% 50 Hz, 3-phase, 230/400 volts, approx. 8kW Energy consumption: 6 kWh Frequency 50 Hz 2% active power 1.18 kW Volume < 80 dB Electrical equipment: brand products, in accordance with standard MAS machine no. 6017, built 06/2006 Cabinet: Make Rittal V2A firmly installed on machine Pneum. Equipment: Make Festo Glue device: Nordson (3.6 kg tank capacity) with 2 hose system; Glue order volume with proportinal valve Compressed air: 6 bar (dry, oil-free) Air consumption: approx ...
used
High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus
used
The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...
Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...
used
Single acting pneumatic actuator, type it 350 Spring Kit Nr. 4 Function: Federkraftschließend Manufacturer: El-o-matic (today: Emerson) Type: ES0350H1A04A00N0 Serial No.: 4220206001055 Pressure: maximum 8 bar (116 PSI) Max./min. temperature: 80 ° C / - 20 ° C Drives are as good as new, as they are still unused! New price: 563,84
used
Type: RG 206 Bending length: 6,000 mm Capacity: 200 ton Stand size: 5,500 mm Tools: Amada tools Machine weight: 22,000 kg Equipped with: - AMADA bending plant evidence - control pedal - emergency from
new
Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...
used
Manufacturer: Güntner GFH080. 3 B / 2 x 5 medium: water glycol 70 / 30% Medium temperature: 90º occurs C.Austritt 70 ºc. Cooling capacity: 2100kW air temperature: 30ºc. Fans: 10 piece, 1, 5kW, 400V, 50 Hz, 3 wire Connection: DN 100, exit is 2 x 2 x DN 100 Dimensions: Lxwxh = 12. 000x2300x1450mm Weight: 2500kg Sound pressure level: 54 dB(A) 10 m distance, year of construction: 2012 Condition: Very good, slats OK, tightness Jenbacher, tested emergency cooler, dry cooler, dry air coolers, drycooler, glycol coolant
used
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
used
SUB: FOR SALE... USED 2 SET BBC COMPLATE VTR 714E-32 T/C AT TURKEY... EMERGENCY HAVE A GOOD DAY. .WE HAVE USED 2 SET BBC COMPLATE VTR 714E-32 T/C AT TURKEY. AND READY TO LOAD ON TRUCK. OUR T/C SPECIFICATION AS BELOW MOY 1988 SERIAL NO.: X. 140769 / 140770 V 01113 R - H 04010 W 05206 E 03010 U 03 I 01800 T 01100 BOTH T/C ARE IN VERY GOOD CONDATION. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay BEST of regards; Aliaga marine services E-mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
used
Bending capacity: 3.5 mmBiegeleistung (VA): 2.5 mmBiegelänge: 2030 mmMotorleistung: 3.7 kWGrundausstattung and features: upper beam and bending flange on both sides about hydraulic angetriebenWinkel the upper cheek 45 ° PositioniersteuerungManuelle BiegewangenverstellungKlemmdruck of the top clamping, hydraulic, for both sides, Central regelbarManuelle UnterwangenbombierungStandardwerkzeugsatz (engine included) consisting of from:-split upper cheek tool portable 3 foot switch with a separate emergency rash button lower beam rail bending beam rail Backgauge 600 mm, manually verstellbar-CE - compliant
used
1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min
used
CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.
new
Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...
used
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...
new
Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...
used
Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...
new
Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...
used
Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...
new
Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...
used
Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...
new
Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutti ...
used
Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...
new
Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...