eme used for sale

wheel alignment scissor lift 5t, galvanized, Specifications: Stroke underfloor 1,800mm, stroke above-ground 2,160 mm Overall length 5,200 mm, overall width 2,300 mm, ramp height 360 mm, platform length 5,200 mm, Platform width 729 mm, motor power 3 kW, electrical connection 230/400V, 50 Hz, compressed air connection 6-8 bar, Lifting time 45 sec., lowering time 45 sec. Characteristics: Electro-hydraulic drive,2 maintenance-free hydraulic cylinders, No mechanical connections between the rails,Maintenance-free roller lafers, HD unit integrated in the control panel, operation via push buttons with integrated storage option, Integrated hand pump and emergency lowering in case of power failure, Hydraulic synchronization system with automatic level compensation (master-slave system)Pneumatic set-down device with automatic pressure system. Unlocking, non-contact inductive proximity swit ...

charge load: / : / weight: 340 kg diameter: 960 mm height: 980 mm 0: 219 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in the  ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

charge load: / : / weight: 1350 kg diameter: 1760 mm height: 1240 mm 0: 1210 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in  ...

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

plate length: 1550 mm plate thickness: 2 mm number of rolls: 3 roll diameter: 90 mm min. bending diameter: 100 mm weight of the machine ca.: 560 Kg dimensions of the machine ca.: 2,5 x 1,0 x 1,4 m • motorical driven round roll, • operation by foot switch ( forwards/backwards), • back roller by hand wheel adjustable (can be adjusted to bend conically), • bottom roll adjustable via eccenter lever, • top roll is swiveable in order to take the work piece, • safety wire with emergency stopp function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Caterpillar Power Generation generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary standby applications. Machine Model G3516 Manufacturer Caterpillar YEAR 2011 KVA 1825 KVA Condition Used Fuel Diesel TYPE Containerised Set FREQUENCY 50 HZ RPM 1500 RPM Location United KingdomWe are selling; 3 identical units CAT 3516 Diesel Containerised Package – Please see below the specification: 40-foot used containerised package purpose built-sound attenuated high-cube power module ISO containers per the enclosed drawing. CSE approved. 10.cn wall insulation, Sound louvers. bunded fuel day tank with electric automatic fuel topping and fuel cooler Diamond deck steel plate floor, fluid containment Floor drilled and bolt hole wells for Caterpillar sub-base frame 3516 Caterpillar (mounted) Side wall cover ...

Dear customers currently we offer you a used disc or disc grinding machine for model and mold making of the brand HoPa. Here are the technical data of an S 650 machine: Disc diameter: 600mm Table length: 950 mm Table width: 470 mm Table working height: 900 mm Table swivel: 30/45° Schraegan stop: 60/60° Power: 2.2 kW Speed: 1,000 rpm Right-left rotation Emergency stop with engine brake Dimensions: 110 x 85 x 140 cm Weight: 315 kg Documentation incl. CE and declaration of conformity available! Accessories such as inclined stops, adhesives and grinding wheels included. We look forward to your questions and inquiries!

Semi-Automatic Roll Rewinder with Automatic Positioning and Manual Cutting Year of construction: 2023 Condition: Like new, barely in use Manufacturer: LIDEM Construcciones Mecánicas S.L., Spain Inclusive: Blade Lubrication System, Motorized Sharpener, Film Packaging System Description: Semi-automatic slitter rewinder with a cutting width of 2,000 mm, a maximum diameter of up to 400 mm and a minimum diameter of 100 mm. The positioning of the cutting head is automatic, while the lowering of the cutting head is done manually. The fastening system of the cutting head allows for high-precision cutting. System for varying the blade speed to cut all materials. Details: - Two guide benches. Displacement guides for the movement of the head. Cutting head displacement by timing belt. - A servo motor for the movement of the cutting head timing belt allows perfect positioning of  ...

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

Twin type vertical packaging machine (based on VERTIwrap S100L), Vertical packaging machine, Emerson PLC, Eview (Taiwan) touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor (PANASONIC) sealing unit, servo motor (PANASONIC) film pulling, double pulling possible. - Specifications: bag size: L(100-300)xW(80-240)mm (single pulling) | max. speed of the machine in neutral: 180 cycles/min | stainless steel | 380V/8kW | 6bar, 0.6m?/min | machine dimensions: L2510xW1450xH1480mm | weight: 1200/1300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from th ...

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Fabr. Product code: 124984 Year of construction 2017 Load capacity 300 kg Platform size 1250 x 800 mm Useful stroke max. 785 mm Height - table bottom 345 mm Construction height - table top 1130 mm Motor power 0.8 kW Mains connection 400 volts, 50 Hz - Foot switch for up and down, with emergency stop and key switch for control Single scissors with a lifting cylinder - circumferential safety contact strip with limit switches under the upper ramen - adjustable limit switch for the upper lifting restriction - table surface with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic unit with tank mounted under the table- feet under the table corners, mobile with pallet truck own weight 430 kg very good condition, almost as new; used

We offer a used sorter of the manufacturer PROMECH for sale. Description of the product: - 108 sorting units - internal roller conveyor with SEW motors - Emergency stop system - 1 automatic scanning system, 3 manual scanning systems Overall dimensions approx.: 44m x 11m, height 2.85m. Machine location: 89-600 Chojnice/Poland Price on request Machine has been tested and is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl

Traversal X/Y/Z: 365mm/185mm/360mm, Speed range: Various speeds depending on the gear stage: BC - 115/230 rpm, AC - 290/580 rpm, BD - 360/720 rpm, AD - 875/1750 rpm, measuring system: SINO SDS2MS, spindle orientation: horizontal/vertical. Control panel: Features stop, emergency stop and direction control. On-site inspection is possible.

Kirsch / Iveco Emergency Power System Diesel Generator Power Generation Generator Container Operating hours generator: 411 hours Kirsch Power Generation Unit Type: D 300-4 IWE Year of construction: 2007 Rated power: PRP 240 kW Rated voltage: 400 V Rated current: 433 A Nominal frequency: 50 Hz Rated speed: 1500 rpm/min Weight: 2530 kg Iveco Engine Motor Model: F3BE0685CBXXX Displacement: 12.9 liters Specified kW (BHP): 330 (442,50) at 1800 rpm Fuel consumption at specified power: 245mm^3/stroke

Suitable for coating plastic profiles, includes flaming, hoover, humidifier, cooling unit, vacuum pumps, double diaphragm pump, pulsation damper, pull-rope emergency switch, reflection light barrier, filter control valve and other elements, with documentation.

machine measurements: -- mm machine weight: 1.500 kg power capacity: 30 kW Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg ...

VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...

Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton ...

Bending capacity: Plate width: 3000 mm Plate thickness 140 mm Thickness max 200 mm depending on plate width and yield strength Technical data: 3100 mm Surface useful length on rolls 940 mm size of Top roll 840 mm size of Lower rolls 210 mm max thickness opening between the rolls 400/50 Vac voltage - rewirable 480/60 220 Hp Power electric installed Configuration installed with the machine Hardened surface of the 3 rolls. Conical plate bending hydraulic attachment with hardened contrast pad. All the 3 rolls driven with axial gearbox and motor each roll independent Calibration system for the re-rolling of welded shells rounding unwanted flat spots. Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working slow/fast. Emergency systems  ...

weight: 540 kg diameter: 1200 mm height: 1100 mm 0: 350 l total power requirement: 1,9 kW voltage: 350/50 V length in total: 1820 mm - with integrated manual separation ramp - control panel - Dosing pump for liquids - Capacity 382 liters - A soundproofing cover is also offered at extra cost! Sound insulation cover for VKUE 200 + The cover is controlled by a pneumatic piston + While the machine is running, the soundproof cover ensures for significant noise reduction. + It also prevents splashing of water or abrasives + It reduces noise emissions to less than 80 decibels. + The connection requires 6 bar General description: Our vibratory finishing system is suitable for: roughening, removing paint, decoating, deburring, derusting, descaling, de-oiling/degreasing, grinding as well as polishing and smoothing. The can also be used for non-metallic materials machine are used. Depending on the  ...

rated capacity: max. 8,1 kVA capacity in kVA: bei 400 V - 7,5 kVA rated capacity: bei 230 V - 6,1 kVA power fuel: Diesel 0 tank capacity: 15 l 0: 11 KW cubic capacity: 498 ccm weight of the machine ca.: 165 KG dimensions of the machine ca.: 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine type: Volvo TWD 1644GE Power: 650 kVA / 520 kW Generator: Stamford HCI5F Automatic switchgear with generator circuit breaker Cooling: Water Speed: 1500 rpm Battery voltage: 24V Voltage: 400/231 V, 50 Hz Day tank 950 liters and storage tank 9000 liters Type: 40 ft container The system was used in a hospital as an emergency power system. Subject to prior sale - errors possible Internal reference number: E-1004-51

Working length:1040 mm Sheet thickness: 4 mm Cutting angle: 1.6° Backgauge: 10 - 750 mm Number of hold-downs: 1 (13000N) Side stop: 70 - 850 mm Travel speed: 90 mm/s Projection (WxH): 20 x 125 mm Weight, ca.:1600 kg Dimensions (WxDxH), approx.: 1850 x 1870 (3120) x 1550 mm Equipment: - Motorized backgauge - Foot control - Emergency stop impact button -Operating instructions - Table widening

offer 22493 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Tapping in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Left rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - emergency stop button - - Lighting - Quick-change drill chuck 1 - 13 mm - Coolant device - Machine vice - div. 20 pcs HSS – twist drill 8 – 20 mm

3-ring lapping machine diameter mm 3 rings new timer This machine can be inspected under power in our warehouse Test run possible - video available Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Je ...

2 x 2.8MW 50Hz 133Hrs DO NIIGATA 12V26HX Power Plant We are offering a nice and urgent sale of 2 sets of NIIGATA 12V26HX generating set with very short 133 running hours because they had been used as emergency backup ones. Both engine and generator had been kept very clean and in excellent condition. The scope of supply includes 2 diesel generating sets, 2 control units, 1 duplication oil supply unit, 1 air compressor, 2 heat exchangers and all the items were dismantled, packaged and have been stored at warehouse in Japan and are ready for buyer’s immediate inspection and delivery. Main Specifications Maker NIIGATA Model 12V26HX Quantity 2 sets Year of Manufacture 2003 Output 2,800kWe Speed 1000rpm Bore 260mm Fuel Oil Diesel Oil Running Hours only 133 hours (used only emergency backup )

: 40 mm roll diameter: 137 mm : 7 Upm engine output: 1,1 kW weight: 350 kg dimensions of the machine ca.: 1050 x 530 x 1250 mm Features: 2 rollers powered settings readout on scale easy reach emergency button supplied with standard roller set optional: various roller sets (available on request) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

miter square horizontal: +60° / 0° / -45°; miter square vertical: 0° / +45°; cutting hight at 0°: 200 mm; cutting height at 15 °: 190 mm; cutting height at 45°: 115 mm; cutting performance at 0°: 525 mm; cutting performance at 60°: 270 mm; cutting performance at 45°: 370 mm; saw blade diameter: 550 mm; diameter spindle: 30 mm; speed: 2800 U/min; motor power: 4 kW; motor brake: yes, automatically; suction connection: 150 mm; weight: 315 kg; • Aluminium arm • Precision linear guides made of hardened steel • Rotation and tilt from the front of the machine • Emergency stop

Power: 1.1kW; Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter; Speed range: 120 - 1810 rpm; RPMs: 9; Spindle mount: MK-4; Drilling stroke: 120 mm; Spindle projection: 254 mm; Table size: 475 mm x 425 mm; Tilt / rotate drilling table sideways: 45Â left / 360Â; Column diameter: 80 mm; Quick-release chucks: 1 - 16 mm; Weight: 132 kg; Industrial motor User-friendly safety switch according to IP 54 Digital drilling depth and speed display integrated in the housing Separate emergency stop impact switch Precision spindle bore Safety electrical system in 24 V DC voltage Guaranteed concentricity less than 0.02 mm measured in the drill quill Drilling spindle with precision ball bearings High-quality high-speed drill chuck Drilling depth stop Precision-crafted, stable drill table with diagonal T-slots and circumferential cooling water channel V-belt cover ...

Motor power: 565 kW AvK generator with 660 kVA, year of construction 2000 Diesel generator was used as an emergency generator, therefore only about 145 operating hours in test operation. Subject to prior sale - errors possible Internal reference number: E-1160

Drive motor output: 750 W / 400 V; Drilling performance steel: 25 mm; Speed range: 60 - 3050 U/min; Number of gears: 12 steps stepless; Spindle chuck: MT3; Quill stroke: 95 mm; Reach: 209 mm; table size: 308 mm x 308 mm; Keyless drill chuck: 1 - 16 mm; weight: 107 kg; Industrial motor Quiet running spindle thanks to new spindle design Machine operation with safety electrics in 24 V DC voltage Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Right/left rotation Precision spindle bore Control panel with user-friendly, dirt- and water-resistant membrane keypad Speed display Separate emergency stop impact switch Thread cutting function Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel, laterally tiltable by -45° and rotatable by 360 Drilling depth stop LED machine light integrated in the ...

working length: 2451 mm Working width: 2170 mm Working height: 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW  ...

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

working table size: 3000 mm x 1300 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 25 m³/h; pump capacity: 0,75 kW; noise level: 70 Db; heating system temperature: max. 60 °C; heating system: 4,5 kW; machine length: 3100 mm; machine width: 1450 mm ; machine height: 1650 mm; weight: 450 kg; The membrane presses of VP series are optimal solution for woodworking and a furniture production from all types of wood. The vacuum presses are equipped with heating system which allows reduce the time of drying glue and increase productivity of production. The heating temperature monitored and maintained automatically. The membrane presses of VP series can be used for small capacities but also for professional using. Construction The sturdy welded construction with a removable feet’s. Work table from 12mm HPL board.   Heating Heating system ...

Motor power: 1.1kW/230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Band saw speed: 22 / 31 / 55 m/min; Band saw dimensions: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage version Separate emergency stop Impact switch low-voltage electronics 24 V Low-noise running Mobile machine base Ball-bearing saw blade guide Three speed levels for a wide range of material selection Microswitch for automatic limit shutdown Easy-to-read angle adjustment scale Standard with high-quality bi-metal band saw Saw blade tension adjustable on the front side via handwheel Adjustable material stop for serial work quick-release vise for fast workpiece clamping

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;

We offer for sale an emergency generator MTU type 12V4000. Specifications: Engine: MTU Type: 12V4000 Year of construction: 2000 Power: 2000 KVA Operating hours: 4900 h Generator: A.C. Generator Voltage: 400 V Frequency: 50 Hz

Container generators with 2 CAT C32 units with 1000 kVA power each Generator: Stamford HCI634J2 Operating hours: Only 21 Cooling: Water Speed: 1500 rpm Voltage: 400/231 V, 50 Hz Tank: 4x 860 litres The generator was used in an emergency power system, the condition is excellent. The last test run took place in November 2022. Subject to prior sale - errors possible Internal reference number: E-1004-54

technical details generator: - Type: Synchronous - Rated voltage: 230 V - Apparent power at LTP: 4.18 kVA - Active power at LTP (emergency power): 3.8 kW - Apparent power at COP: 3.63 kVA - Active power at COP (continuous power): 3.3 kW - Protection class generator: IP 23 - Version sockets: 2 x 230 V, Schuko - Protection class sockets: IP 44 technical details drive: - Drive: SC170B - Power factor: 0.9 cosφ - Starter: Hand start - Engine oil quantity: 0.25 (min) - 0.6 (max) liters - Fuel: Gasoline - Tank volume: 15 liters - Runtime at 50% load: 14.0 hours - Runtime at 100% load: 9.5 hours - Sound pressure level Lp: 75 dB(A) - Sound power level Lw: 96 dB(A) Dimensions and weight: Length: approx. 595 mm Width/depth: approx. 460 mm Height: approx. 527 mm Weight: approx. 55 kg Scope of delivery: - 1 x wheelset with folding handle (Changes and errors regard ...

sheet width: 2050 mm plate thickness: 2 mm strokes per minute until: 38 cutting angle: 1,75 ° table height over floor: 870 mm total power requirement: 3 kW weight of the machine ca.: 1520 kg range L-W-H: 2,2 x 0,6 x 1,2 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emerge ...

: 6,0 mm ST 40 : 3,0 mm VA : 30 - 140 Grad blade length: 200 x 200 mm table:: 900 x 990 mm work height max.: 940 mm Punching capacity: 35,0 in 6,0 mm engine output: 4,0 weight: 1020 kg range L-W-H: 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad was created with ModulMWS - the software ...

: 6,5 mm ST 40 : 3,5 mm VA : 90° Grad blade length: 250 x 250 mm table:: 810 x 750 mm work height max.: 950 mm engine output: 4,0 weight: 630 kg range L-W-H: 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine was built by the Chinese brand FOSHAN OCPACK PACKAGING MACHINERY CO.,LTD. in 2021. Reliable and easy to operate machine, performs the process of automatic packaging of a wide range of products i.e. food, medicines and cosmetics into cardboard boxes with maximum dimensions of 130x80x210 mm. The items are transported by conveyor belt to a designated area, where they are stacked and pushed inside the box. A microcomputer together with a photocell controls and ensures that the packing process is performed accurately. The automatic carton box packaging machine is equipped with an OMRON HMI panel and an emergency stop button. The total weight of the machine is approx. 1300 kg. Technical specifications of the FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine - HMI panel: OMRON - maximum box dimensions (L x W x H): 1 ...

WEILER DA 210 / 3-axis digital display Heidenhain Including CE marking - ORIGINAL CONDITION Center height 210mm Center width 1000mm Circumferential diameter over bed 435mm Circulation diameter via face slide 245mm Spindle bore 52mm Speed range 40-2000 rpm Automatic longitudinal / plan feeds Drive power 5.5 KW Cjr3wkhxxx Quick-release holder with 3 inserts Feed protection Work lamp 2x EMERGENCY/OFF Central lubrication Three-jaw chuck - 200mm Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters weight 1400KG Errors / input errors excepted Chip back wall Coolant device

bore capacity in steel (diameter): 28 mm throat: 250 mm bore stroke: 130 mm morse taper: 3 MK table:: 380 x 380 mm turning speeds: 75 - 3000 U/min engine output: 1,1 kW column diameter: 98 mm thread: M16 ST60 dimensions: 700 x 450 x 1500 mm weight: 200 kg NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjust ...

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 460 x 460 mm turning speeds: 75 - 3200 U/min engine output: 1,5 kW column diameter: 125 mm thread: M16 ST60 feed: 0,10/0,18/0,26 mm/U dimensions: 800 x 500 x 2200 mm weight: 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

E-chain hoist, electric hoist, crane STEEL type T510-8 / 2.0 2/1 Fab. No. 1524132 Year of construction 1997 Load capacity 2000 kg Hook travel 4 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Load trains 2 Cable length Control bottle approx. 0.9 meters Nominal power 1.6 kW / 0.36 kW Rated current 4.3 A / 2.5 A Mains connection 400 Volt, 50 Hz - Suspension eyelet on the top of the crane- Emergency stop weight 75 kg good condition; used

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.