eme used for sale

We offer a new, universal element slab formwork system EVODECK 205m², directly from the factory at great conditions, special net price 60.312,00€ Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 100 Element EVODECK 150x120 cm with PP formwork plate 8 Element EVODECK 150x75 cm with PP formwork board 8 Element EVODECK 120x75 cm with PP formwork board 60 Drop head EVODECK 90 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 6 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and discou ...

: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...

bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete ...

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

Key data: 520 , 7

Holzkraft SCM thickness planer S 52ES Product name: Thickness planer Model: S 52ES Type: SP-03 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: KK00019806 Year of construction: 2021 Condition: as good as new technical details: - Work table size: 850 x 520 mm - Useful width: 520 mm - max. chip removal per operation: 5 mm - Knife shaft diameter: 120 mm - Number of knives: 30x3x520 / 4 pieces - Knife shaft speed: 5,200 rpm - Holding time knife shaft: less than 10 sec - Feed speed during thickness planing: 5 - 8 - 12 - 18 m/min - Diameter of the extraction hood (plastic): 120 mm - required speed of the extraction air: dry chips = 20 m/sec, wet chips = 28 m/sec - Consumption of extraction air [diameter 120 mm]: 814 m³/h dry chips, 1,140 m³/h wet chips workpiece height: 240 mm workpiece width: 520 mm - min. workpiece height: 3.0 mm - min. workpiece length:  ...

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 174900 € : 4000x2000 mm : 37 kW : Max. Materialstärken : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4.100 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT o ...

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

ERMAK HAP 2600 X 80 CNC hydraulic press brake was manufactured in 2005 by the Turkish company ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine characterised by high performance and robustness, performs precision bending of workpieces with a maximum length of 2600 mm and a thickness of 6 mm with a force of 80 tonnes. The machining parameters in the X and R axes are programmed easily and conveniently through the CYBELEC DNC 60 CNC controller located on a mobile arm. The HAP 2600-80 press brake also offers a high level of operator safety, thanks to an emergency button and light curtains made by FIESSLER ELEKTRONIK to prevent unauthorised entry into the machine’s working area. The total weight of the press brake is 5600 kg. Technical specifications of the ERMAK HAP 2600 X 80 CNC press brake - press force: 80 t (800 kN) - feed in X/R axis: 500/160 mm - maximum sheet metal length: ...

Machine number: 2023-578 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: Emergency generator + + NEW - Year of construction 2023 + + producenter:Geen Power Model : GP88 S/I-N-A Engine : Perkins 4 cylinder turbo diesel water-cooled. Generator: MECCALTE Rated Power: 88 KVA Continuous Power: 80KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts L:Operating hours : approx. NEW Year built:2023 Consumption: 14-16./h (75%) Sr: 254865 L2260xW1000x1420/1325 kg Incl. sockets Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 217800 € : 4000x2000 mm : 37 kW : bei Wasserstrahl : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4136 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 H ...

Machine number: 2023-578 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: Emergency generator + + NEW - Year of construction 2023 + + producenter:Geen Power Model : GP88 S/I-N-A Engine : Perkins 4 cylinder turbo diesel water-cooled. Generator: MECCALTE Rated Power: 88 KVA Continuous Power: 80KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts L:Operating hours : approx. NEW Year built:2023 Consumption: 14-16./h (75%) Sr: 254865 L2260xW1000x1420/1325 kg Incl. sockets Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

Bale size: 600 mm H (variable) × 600 mm W × 400 mm D Bale weight: 15–30 kg Pressing time: 35 seconds Pressing force: up to 8 tons Dimensions: 2500 mm H × 765 mm W × 575 mm D Integrated bale ejection mechanism Hinged door Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Weight: 415 kg Noise: 70 decibels DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification Made in EU OPTIONS Collecting tray for residual liquid Suitable for use at sea Electronic weighing system Annual maintenance contract Solar powered Galvanized or stainless steel V5HD PRESS FOR CANS & BOTTLES Fast, efficient and easy to use: The V5HD effortlessly presses aluminium cans and PET bottles to make them easier to dispose of. Recommended for restaurants, pubs, bars and special recyclers. Hinged door and 35-second pressing time Integrated bale ejection mechan ...

Machine number: 2023-578 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: Emergency generator + + NEW - Year of construction 2023 + + producenter:Geen Power Model : GP88 S/I-N-A Engine : Perkins 4 cylinder turbo diesel water-cooled. Generator: MECCALTE Rated Power: 88 KVA Continuous Power: 80KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts L:Operating hours : approx. NEW Year built:2023 Consumption: 14-16./h (75%) Sr: 254865 L2260xW1000x1420/1325 kg Incl. sockets Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

CP30 PRESS FOR CANS AND OIL FILTERS With its compact design and a pressing force of 8 tons, the CP30 efficiently presses metal cans and large oil filters up to a size of 30 liters. Recommended for car repair shops, paint shops and food manufacturers. Pressing force of 8 tons Low voltage control and emergency stop knob for safe working Easy removal of cans after pressing and drip tray for residual liquid SPECIFICATIONS Dimensions with stand: 2540 mm H × 1105 mm W × 680 mm D Dimensions without stand: 1435 mm H × 615 mm W × 680 mm D Dimensions of the pressing chamber: 475 mm H × 350 mm W × 350 mm D Weight: 245 kg Pressing time: 35 seconds Pressing force: up to 8 tons Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels IP54 protection class CE Certification Made in EU OPTIONS Savings model Suitable for use at sea Galvanized or stainl ...

Specifications: - Pressure capacity 1000 KN - Stroke infinitely adjustable 10 - 100 mm - Stroke rate 34 - 80 1/min - Projection approx. 510 mm - Installation height approx. 450 mm - Drive 400 V / 15 kW - punches e.B. up to 31 mm Ø in steel 25 mm - with special punch saddle z.B. up to 58 mm Ø in steel 13 mm - e.B. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2400 x D 2300 mm - Weight approx. 3600 kg - with: - Hydr. Low Pressure Grain Detection Device - various punches + matrices - Emergency stop button

Three-point wood chipper, drive PTO 540 – 1,000 rpm, 4-blade chipping disc, feed up to 160 mm, Chip length 15-50 mm, power requirement 18-60 kw. Machine weight approx. 600 kg. Oil motors for wood feed leaking, one flap on the feed funnel loose, no feed electronics installed, electrical emergency stop available. Other wood chippers available - also motorized machines. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

We offer here a Dräger Oxylog 2000 in very good condition. The device is complete with power supply, NiCd battery pack, pressure reducer, breathing tube, connection hose, instructions for use German, English, French. The device can of course be shipped. Oxylog 2000 – time-controlled, volume-constant Emergency ventilator for patients weighing 100 mL or more Respiratory volume. Applications: – Mobile use in emergency medicine / primary care of emergency patients – During transport in rescue vehicles/helicopters – During transfer trips and transfer flights – During the transfer of ventilator patients Convertible into different languages German, English, Spanish, French, Dutch, Swedish, Portuguese, Italian If you have any further questions, please do not hesitate to contact us at 05462/7456204 or by e-mail

Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 470 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge),  ...

Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](https://en.wikipedia.org/wiki/Cerium(IV)_ox ...

Code: 0533 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 1/C 3000 - CE Standard Automatic wide belt sander with mobile head 3000 mm for wood, panels in general, plywood, truck beds, camper vans, caravans, prefabricated houses, shipbuilding, aeronautical industry, composite materials and various - CE Standard - Year 2005 Technical data: Working width mm 3000 Max working height mm 100 Min working height mm 2 Variable belt feed speed m/min 5/25 with inverter - Motor Kw 4 Calibrating/sanding steel roller - Diameter mm 400 - Belt development mm 2620 x 3050 - Motor Hp 50 (Kw 37) - Rpm 1465 Front and rear brackets for holding pieces Oscillating blowers for cleaning front and rear belt l/min 2000 Automatic head lifting Rotating blowers for cleaning output panels - 2 suction mouths diameter 160 mm Numerical control Syel for working group management Emergency safety bar Suc ...

Product number: 2783 Type: Titaan 2-90 Serial number: HTN10220019 Year of construction: 2023 Chamber: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/hr Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and outfeed conveyors Hellings conveyor Type: 12980-10 Serial number: 790311 Year of construction: 2021 Belt width: 600 mm Length: 3000 mm Henkelman diptank Type: 200A Serial number: H0D20220008 Year of construction: 2022 Heating: electric Usable space: 575 x 1100 mm Emersion depth: 200 mm Cycle time: 22 sec Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg

King Regius Spiral Kneader Type: SP 125 Spiral kneader extendable with 2 stainless steel boilers digital film control with emergency off for max. 125 kg dough content per kettle Stand-up machine 400 Volt high current connection 2 Speeds Flour dust cover Year of construction 2004

sheet width: 3050 mm plate thickness: 4 mm cutting angle: 1,5 ° table width: 530 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 4100 kg dimensions of the machine ca.: 3,63 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The C500 sub-vacuum consists of a double bell to optimize the packaging process. It allows the packaging of products under vacuum and in a protective atmosphere. Each bell has 2 welding bars. TECHNICAL DETAILS: - Machine dimensions (d x w x h): 1050 x 1600 x 1065 mm. - Bell dimensions (d x w x h): 745 x 650 x 200 mm. - Weight: 650 kg. - 4 casters including 2 directional - Synthetic loading plates for the bell. - Bell in standard execution. - Bell cover for bell height 200mm. - 2 parallel weld bars, l = 650 mm, front and rear. - BUSCH pump of 250 m3 FEATURES: - Auto shut-off function with boiling point recognition. - Fully graphic display - Emergency vacuum stop - Intuitive operation - Accurate vacuum measurement via vacuum detector - 18 selectable languages - Program brief for 29 recipes.

Impact machine stirring machine Rego Model: SM 3 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 1,5 kW,16A-CEE plug Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Impact machine stirring machine Rego Model: SM 3 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 1,5 kW,16A-CEE plug Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Impact machine stirring machine Rego Model: SM 3 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 1,5 kW,16A-CEE plug Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 160 - 2250 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm thread: M24 ST60 thread: M30 GG20 weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely variable speed setting by ...

bore capacity in steel (diameter): 30,0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 225 - 4.300 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm weight: 260 kg Machine height: 1.790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and le ...

: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) Pos. 24 Coolant device A, consisting of: Coolant base plate with machined Workpiece support surface 320x320 mm and 2 T-slots, pump with Motor protection switch, complete fitting The data for this ad was created with ModulMWS -  ...

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

LIQUIDATION of automatic chopper LA MINERVA, model CE 700S, with mouth diameter of 98 mm. and with the following characteristics: Operation with an automatic feeding system by loading hopper and conical spindle feeding the cutting plates. Perfect chopping without rubbing or bruising, characteristics that, together with its great robustness, make it stand out from the rest of the machines on the market. Mouth Ø 98 mm. All the exterior of the machine and the rest of the pieces in contact with the meat, are made of stainless steel AISI-304, complying with all current legislation in this regard (EC Regulations) 7.5 HP (5.5 KW) geared motor Push-button control panel Electrical panel with triangle star start, transformer and protection elements. General power switch. Emergency stop system. Safety device by tilting protection at the outlet of the product with electrical disconnection b ...

KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls

Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine type: 4 TNV 98 T Engine No.: 180067 Motor power: 37.7 KW Cooling: Water-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator Type: ECP32.2S4C Gene. Item #: P217148 Generator power: 45 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 pole Delivery: Assembled Width approx. mm: Height approx. mm: Depth approx. mm: Tank: Design: Base frame tank with drip tray Width approx. mm: Height approx. mm: Depth approx. mm: Content / Litre: 100 Dimensions of th ...

bore capacity in steel (diameter): 25,0 / 30,0 mm throat: 150 mm bore stroke: 120 mm threading: M18 / M22 spindle taper: 3 MK table:: 300 x 270 mm turning speeds: 200 - 4.000 U/min column diameter: 100 mm total power requirement: 0,75 / 1,1 kW weight: 170 kg range L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

– Capacity 50 tons – Hydraulic – 4 stations – Foot control – Electric backgauge - Emergency stop Ebhzaoz – With 10 stamps (8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm) – Peddinghaus punching recording – Documentation – 400 V

Genie GS-2046 Self-Propelled Scissor Lift The quiet, emission-free Genie GS-2046 scissor lift is the ideal machine for construction site, maintenance and installation applications on solid surfaces, indoors and outdoors. With an impressive working height of 8.10 m, it offers sufficient space and stability for workers and equipment Manufacturer: Genie Model No.: GS-2046 Year of construction: 2005 Equipment • Folding railing with full-height platform swinging door • Joystick control: two lifting and travel speeds & two pre-selectable speed levels • User-friendly diagnostic system • Platform control panel with battery charge indicator • Fully integrated diagnostic system • Power cable to platform • Attachment points for harnesses • Emergency release valve for manual lowering of the platform • Emergency stop switch on platform and floor control pane ...

CAT 3608 Generator Sets 2500kW 60Hz 360HR (2 sets) These generating sets had been used as emergency stand-by generators for a famous amusement park in Korea. Therefore, the operating time is less than 360 hours, and the generating sets had been well maintained. They have now been dismantled and stored at our factory since they were decommissioned in 2021, so they can be inspected and delivered at the customer’s convenient time. Main Specifications: - Engine Model: CAT 3608 x 2 sets - Maker: Caterpillar - Continuous Output: 2,500kWe x 900 rpm - Frequency & Voltage: 60Hz & 6,600V - Year of Production: 1987 - Fuel Oil: Diesel Oil - Running Hours: 335 & 354 hours

Sinmag conical round knitter with flour spreader - with flour spreader - Cones and gutters with Teflon coating - with stainless steel base - with emergency switch - on swivel castors with parking brake

- Designed to make any type of dough or sauce that requires quick or even cooking, or to work without temperature. - Manufacturer: INHOSPAN - Year: 02/2023 - Capacity: 100 L - Total power: 13.5 kW - Engine power: 1.5 kW - Voltage: 380 / 400 V three-phase - Frequency: 50 Hz - Dimensions (L x W x H): 740 x 1020 x 1730 mm - Variable speed drive - Digital Viewer Description:  - Designed and manufactured for various uses such as the preparation of croquettes, béchamel, sauces, custard, jams, syrups, etc. - Double-bodied stainless steel cauldron, cooking and heating. - Heating by stainless steel shielded electric resistors immersed in thermal oil, allowing uniform and homogeneous cooking. - 3 working positions: preparing-cooking (with the use of shovels), filling or cleaning and emptying (with removal of the shovels). - Stripping scoop with Teflon scrapers, preventing the p ...

tube diameter: 6 - 28 mm wall strength: 2 mm bending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mm bending angle max.: 190 ° arbor length: 3000 mm operating pressure: 180 bar hydraulic motor: 4 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 3,8 x 1,1 x 1,3 m Condition: ready for operation: Electric 400 Volt: Bending segments: diverse Zoll Bending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 m Double Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraul ...

Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm

Lamidesk EasyShift 400/160 Laminator Lamidesk EasyShift 400/160 Flatbed Laminator Characteristics: max. lamination width: 1600 mm max. lamination length: 4000 mm min. table height: 850 mm max. clearance height: 60 mm Max. speed: 0 - 25 m/min Control: Roller pressure: pneumatic Engine operation: yes Speed: Rotary control Equipment: Countertop: 10 mm toughened safety Height adjustment: optional Table lighting: optional Propulsion: Motor / manual Heated roller: optional Movable (rollers): yes Specifications: Compressor connection: Euro plug Air pressure / demand: 6 bar - 4 l/min. Power supply: 240 V Power consumption / with LED: 380 W / 780 W Device dimensions: 4710 x 1950 x 1000 mm Weight device: approx. 630 kg Quality LamiDesk is manufactured with well-known components that are available worldwide. The use of these components ensures continuous operation a ...

sheet width: 2570 mm plate thickness: 2,5 mm pre-bending capacity: 1,8 mm diameter of upper rolls: 140 mm total power requirement: 2,2 KW weight of the machine ca.: 1,93 t dimensions of the machine ca.: 3730 x 800 x 1100 mm Basic equipment: - Conical bending device - Swiveling top roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Electrically adjustable rear roller Digital display for rear roller Hardened rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.