emco lathe used for sale

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm spindle turning speed range: 80-2200 U/min table-size: 600 x 200 mm dimensions of the machine ca.: 1400 x 1150 x 1600 mmxmmxmm weight of the machine ca.: 0.6 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..

turning diameter: 550 mm turning length: 1500 mm control: Fagor 8055 x-axis: 108 mm z-axis: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC milling machine Type: EMCOMAT FB-450 MC Manufacturer: EMCO Year: 2019 Control: Siemens Sinumerik 828D X: 450 mm Y: 350 mm Z: 400 mm Table size: 800 × 400 mm Maximum table load: 300 kg Spindle-table distance: 230 – 630 mm Rapid traverse X/Y/Z: 5000 mm/min Working feed: 10 – 2000 mm/min continuously Spindle speed: 10 – 5000 rpm Main motor power: 10 kW Tool clamping: SK40 Horizontal and vertical milling Vertical head tiltable by ±90° Dimensions: 1980 × 2030 × 1990 mm Machine weight: 2270 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine.

This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table surface area: 600 x 200 mm spindle taper: SK 30 spindle turning speed range: 80 - 2200 U/min feeds X-axis: 50 - 550 mm/min feeds Y-axis: 50 - 550 mm/min rapid traverse: 1500 mm/min quill stroke: 45 mm vertical head swivelling: +/- 90 ° total power requirement: 1,4 kW weight of the machine ca.: 500 kg dimensions of machine L x W x H: 1,50 x 1,20 x 1,60 m Accessories: DRO on 3 axis HEIDENHAIN, solid table, vertical head with quill retraction, counter bearing, various short and long tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

vertical machining center, year 2021, 3860 operating hours, CNC Sinumerik 828D. Used machine in good condition. More info & price on IndustrialBuyer.

vertical machining center, year 2016, 13000 operating hours, CNC SINUMERIK 840D. Used machine in good condition. More info & price on IndustrialBuyer.

Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg

This 3-axis EMCO MT 110X 1500 M/S was manufactured in 2007. It features an impressive X-axis travel of 410 mm and Z-axis travel of 1560 mm, with a maximum turning diameter of 610 mm. The machine is equipped with a powerful 42 kW spindle and offers live tooling capabilities. If you are looking to get high-quality turning capabilities, consider the EMCO MT 110X 1500 M/S horizontal turning machine we have for sale. Contact us for further details.

CONTROLS   CNC controls SIEMENS BASIC FUNCTIONS   number of spindles: 4   number of turrets: 2   live positions: yes   number of c-axes: 4 WORKING RANGE TURNING   turning diameter (max): 100 mm   bar diameter (max): 20 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min COUNTER SPINDLE   spindle revolutions (max): 5000 /min TOOL MAGAZINE   number of positions: 48 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 9600 mm   space requirements -front/back-: 1500 mm   total height: 2200 mm   total weight approx.: 2600 kg ATTACHMENTS (TURNING)   bar magazine: optional   - bar length (max): 3000 mm   chip conveyor: yes   coolant unit: yes   hydraulic system: yes Features: - various tool holders - various collets in every millimeter increment - bar feeder (dual channe ...

Bar diameter 10 – 65 mm Max. rod length 3,000 mm Multi-lane material support

Horizontal turning machine manufactured in 2014. This EMCO E25 features a maximum turning diameter of 85 mm and a maximum turning length of 225 mm. It includes a VDI 16 disk turret with 12 tool stations and a rapid traverse speed of 15 m/min in the X-axis. If you are looking to get high-quality turning capabilities, consider the EMCO E25 machine we have for sale. Contact us for further details.

brinell hardness: . rockwell hardness: . throat: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 350 mm y-travel: 250 mm z-travel: 300 mm Control: SINUMERIK 828 D distance spindle nose and table: 120 -420 mm surface area: 520 X 300 mm table weight: 100 Kg T-slots: 5 T - slots distance: 45 mm T - slots - width: 12 mm turning speed range - milling: 0 - 10.000 U/min Torque: 33/41 0 spindle drive: 7/8,5 kW Tool taper: SK - 30 : 20 fach total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2004 : 4540 : ca. 2 Wochen ab Auftragse : Österreich : 19900 € : 1 : 63 - 3150 (18) U/min : 700 x 500 x 500 mm : 900 x 500 mm : 6.6 kW : 2150 mm : 2220 mm : 2120 mm : 2550 kg : 500 kg : 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm feed power: 160 kp speed: 20 - 200 mm/min rapid traverse: 1200 mm/min total power requirement: 1,4 kW weight of the machine ca.: 0,45 t X-axis travel: 300 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Feed force: 160 kp Feed speed: 20 – 200 mm/min Rapid traverse: 1,200 mm/min Total power requirement: 1.4 kW Machine weight: approx. 0.45 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), - Chuck SMW Autoblok dia 220mm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EMCO FB-3 ist eine Universalfräsmaschine mit hoher Präzision, ausgelegt für große Genauigkeit und Zuverlässigkeit. Tisch 600×180 mm mit 4 T-Nuten; Verfahrwege X 300 mm, Y 200 mm, Z 350 mm; Pinolenhub 45 mm; max. Werkstückgewicht 50 kg; Schwenkbereich Vertikalkopf ±90°. Spindelaufnahme SK30, 6 Stufen (80–2200 t/min); Spindelmotor 1,1/1,4 kW; Eilgang 12 m/min; Anschluss 3×380 V 50 Hz; Gewicht ca. 500 kg; Abmessungen 1500×1150×1550 mm. Digitalanzeige 3 Achsen von HEIDENHAIN. Erreicht enge Toleranzen; typisch einsetzbar in Automobil-, Uhren-, Werkzeugmaschinen-, Luft- und Raumfahrt- sowie Medizinbereichen. Technische Daten ohne Gewähr

EMCO F 3 ist eine Universalfräsmaschine für hohe Präzision, beste Genauigkeit und Zuverlässigkeit. Kapazität: Tisch 600×200 mm, Wege X300 Y200 Z350 mm, Vertikalpinole 45 mm. Technisch: SK30, 8 Stufen 80–2200 t/min, 50Hz 3×380V, Digitalanzeige 3 Achsen (ELESTA VISULESTA 4). Zubehör: Schraubstock, Spannzangenhalter und Satz, Lampe. Erreicht enge Toleranzen; Anwendungsfelder: Automotive, Uhren, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Table size: 400 x 800 mm Table travel x/y/z: 600/400/400 mm Swivelling vertical milling head, spindle mount: SK 50 Quill stroke: 100 mm Speed range: 63 - 3150 rpm Feed speed x and y/z: 16 - 800 mm/min/8 - 400 mm /min Rapid traverse x and y/z: 2000/1000 mm/min electr. Connection: 380 V, 5.3 kW Space requirement: 2200 x 2150 x 1910 mm Weight: 2200 kg

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

Key data: 900 mm, 500 mm

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport For sale is a high-precision tool milling machine from the Austrian manufacturer EMCO, model FB-5 (Emcomat). This industrial machine is appreciated in toolmaking, prototyping and training workshops for its excellent geometry and reliability. Equipped with universal table as well as horizontal & vertical spindle for maximum versatility in milling and drilling work including extensive accessory package (various cutter holders/SK40 taper; clamping devices etc.)

Technical data Manufacturer: EMCO Model: Maximat Super 11 Speeds: 55 / 110 / 200 / 300 / 410 / 600 / 1100 / 2200 rpm 8 speed levels Digital display: ELESTA VISULESTA II E Hardened machine bed Configuration 3-jaw chuck available Additional 3-jaw chuck Collet holder with collet set Quick-change steel holder Tailstock available Accessories with tool holders and tips Machine in used condition Auction-ID: A7-49302-3061

Auction-ID: A1-49365-7

Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height above bed: approx. 100 mm Travel X: approx. 100 mm, Z: approx. 200 mm The machine is equipped with a tailstock, a three-jaw chuck and a special tool turret including a mobile workbench and matching accessories Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. The illustrations serve only as examples. It cannot be guaranteed that the accessories shown are included in the scope of delivery Auction-ID: A7-49056-36

Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Tool holder: probably SK 30 Max. tool clamping length: 35 mm Table dimensions: 420 x 120 mm with 2 grooves and a special EMCO vice Jaw width: 60 mm Travel - X: approx. 190 mm, Y: approx. 140 mm, Z: approx. 260 mm incl. matching mobile workbench with various suitable contents incl. 7-fold tool changer, collets and various matching tool holders Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. The illustrations serve only as examples. It cannot be guaranteed that the accessories shown are included in the scope of delivery Auction-ID: A7-49056-35

L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm

Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret

Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes

IN THE RETROFITTING PHASE Height tips 900 mm Point distance 7,000 mm Turnerable diameter on the bench 1,850 mm Turnerable diameter on trolley 1,350 mm Turnerable diameter on recess 2,150 mm Bench width 1,000 mm Bar passage diameter 206 mm ASA A1 15" spindle attachment Top speed 300 RPM Diameter of the tank counterpoint 220 mm Row stroke counterpoint 450 mm Withworth threads - metrics - diametrics - module Weight allowed between tips without lunettes 15 ton Weight allowed between tips with a 20-ton bezel