emb used for sale

Hydraulic embossing press from WSK

pressure: 40 t stroke: 150 mm serial number: 100091 : 2 : Druck & Hub verstellbar pressure: 25 t weight: je 1,5 t safety light frame: ja bei beiden The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

Calender

Auction-ID: A1-51251-74

We are offering for sale three used Tajima embroidery machines available as a complete package. Machines Included Tajima Single-Head Embroidery Machine (1-head) - Year of manufacture: approximately 2005 (exact date not available) Tajima Four-Head Embroidery Machine (4-head) - Year of manufacture: 2005 Tajima Six-Head Embroidery Machine (6-head) - Year of manufacture: 2007 Here is some additional information about the machines: 1-head Tajima, manufactured in 2003 Hasn’t been in operation for a long time; unfortunately, we can’t say anything about its condition, but it should run Hood frame included 4-head Tajima TFHX-IIC1504, manufactured in 2005 Embroidery area: 450x360 This machine is in working order and was operational until it was replaced No cap frame or other accessories 6-head Tajima TFHX-IIC1506, manufactured in 2007 Does not run; the motherboard may be broke ...

One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: ap ...

MARKATOR MV5 T0 ist eine Nadelpräger, konzipiert für präzises Markieren und Prägen mit hoher Genauigkeit und Zuverlässigkeit. Längsweg (X): 100 mm; Querweg (Y): 100 mm. Abmessungen: L 500 x B 400 x H 700 mm; Maschinengewicht ca. 100 kg. Kompaktes Format mit ausreichenden Verfahrwegen für kleine bis mittlere Bauteile. Erreicht enge Toleranzen; typische Anwendungsbereiche: Uhrmacherei, Schmuck, Automobil, Luftfahrt, Medizintechnik und Werkzeugmaschinenbau Technische Daten ohne Gewähr

MARKATOR MV5 T0 ist eine Nadelpräger-Maschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Längsweg (X-Achse) 100 mm und Querweg (Y-Achse) 100 mm; geeignet für die Kennzeichnung kompakter Werkstücke. Hauptdaten: Maschinengewicht ca. 100 kg; Abmessungen L 500 mm × B 400 mm × H 700 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizin. Technische Daten ohne Gewähr

Antique Embossing Hot Stamping Press Karl Krause KHP Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Wunderschön verarbeitete antike Kniehebelprägepresse  Beautifully crafted antique Embossing Hot Stamping Press

Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device

Equipped with: Glass back, Bally Embryon widebody pinball machine, built in 1981, model 1222, solid-state electronic, suitable for 1–4 players, equipped with digital displays, 4 flippers incl. unique Flipsave, 4 pop bumpers, 7 drop targets, captive balls, spinner, 2-ball multiball, voice function and LED lighting, completely restored, one of only 2,250 units produced. Auction-ID: A1-47451-1750