max. workpiece diameter: 400 mm
workpiece length - max.: 300
mm
Control: SIEMENS 840Dsl
swing diameter: 520
mm
chucking diameter: 500 mm
travel x / y / z: 995/+,-30/580
mm
total power requirement: kW
weight of the machine ca.:
t
dimensions of the machine ca.: m
Operating hours (total):
1848 hours
1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE
UNIT
The Y-axis slide unit is mounted on the side of the machine
base.
A fast-reacting, position-controlled, and maintenance-free
servo motor is used for the axis drive. It drives the slide via a
high-precision ball screw. A linear measuring system is built into the
Y-axis. Positional accuracy: 2 µm.
BASE TURRET UNIT
Shortest
swivel times thanks to direct swivel drive, cooled for consistent
accuracy.
MAIN SPINDLE 37.7 KW
1.2.3 HP TURRET DRIVE UNIT
FOR DRIVED MACHINE TOOLS (C442)
With internal coolant supply to
the tool.
Max. speed 6,000 rpm
Crosscut speed 3,200
rpm
Torque at 100% duty cycle 54 Nm/18.1 kW
Torque at 40% duty
cycle 83.6 Nm/28.0 kW
Torque at 10% duty cycle 100 Nm/33.5
kW
1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS,
12xBMT75
for BMT75 tool holders
1.2.6 ROTATING WORKPIECE
TRANSPORT SYSTEM, O-TYPE
Drag frame system for 10
workpieces
Max. workpiece height (including workpiece pallet) 300
mm
Max. workpiece weight 60 kg
1.2.7 SET (10 pieces) DRAG
FRAME for O-type belt
For workpiece diameters 150 - 400
mm
1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE
(PICK-UP)
1.2.10 COOLANT SUPPLY 15 bar
Coolant pump flow
rate approx. 80 l/min at 15 bar.
COOLING UNIT (6.5 kW,
water-air)
A cooling unit (with dual-circuit technology) regulates
the machines thermal balance. The spindle drive, control cabinet, and
turret are kept at ambient temperature (10°C - 40°C). Cooling
capacity: 6.5 kW
1.2.11 COOLANT DOUBLE FILTER, MANUALLY
SWITCHABLE
Filter fineness 100 µm, with electrical and mechanical
contamination indicator
1.2.12 CHIP CONVEYOR, HINGED BELT
VERSION - REAR-FACING
Chip discharge height 1100 mm. /With
integrated coolant reservoir, capacity approx. 500 l.
1.2.13
EMULSION MIST EXTRACTION
Extraction capacity approx. 800
m3/h
1.2.14 FLUSHING GUN
1.2.16 WORKPIECE
MEASUREMENT
with a measuring probe that is completely protected
from chips and coolant outside the work area.
1.2.17 BLOW-OFF
PROBE
1.2.19 ENGRAVING SOFTWARE PACKAGE
1.2.20 TOOL
LIFE MONITORING - SISTER TOOL MANAGEMENT
1.2.21 TOOL BREAKAGE
MONITORING TOOLINSPECT MCU - EUROPE
(SIEMENS 840DSL, FANUC
31i/32i)
1.2.23 3-COLOR INDICATOR LIGHT
1.3.2 AXIAL
DRILLING AND MILLING HEAD - BMT75 CC
1.3.3 ANGLE DRILLING AND
MILLING HEAD 90° - K512523 BMT75 CC (i=1:1)
1.3.4 TOOL SET
FOR OP10 + OP20
1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE
150 - with 1 media feedthrough
The coolant is supplied to the
workpiece through the main spindle and the clamping
device.
1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick
Change
n max. = 2200 rpm (Recommended speed according to DIN
6386)
- Set of hard base jaws
- Set of soft top
jaws
1.3.11 Attachments for KNCS-N 500-155
Consisting
of:
- Chuck flange DIN 55026 A11
- Drawbar adapter with
through-hole and shut-off valve for central air or coolant
supply
- Mounting screws
1.3.12 Irrigation nozzle in
chuck bore
Additional tool holders with tools
1x
8.BMT25VL8IKX50 External finishing cutter
1x 8.BMT25VL8IKX50
External roughing cutter
1x 60.7516VL8IKDI15 Engraving Tool
1x
60.7516VL8IKDI15 Tapping Chuck
1x 40.75V5KRVL8IKD 50mm Cutter
Head
3x 80.75V5VL8IKD Boring Bar Holder
2x 27.V520HYDL26 Drill
Bits, 20mm Diameter
1x 42.V522L08Ik Drill Bits, 22mm
Diameter
1x 27.V514WNL31 Drill Bits, 14mm
Diameter
The data for this ad was created
with ModulMWS - the software solution of LogoTech oHG.
Germany
Deutschland 
