elo motor used for sale

Gear motor, electric motor -Speed: 48 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 650/260/H280 mm -Weight: 56 kg

Geared motor with brake SEW USOCOME R40DT63L 4B03 / HR ( R40DT63L4B03/HR ) 0.25 kW 74 rpm 220 / 400 V IP55 Shaft diameter: Ø 25 mm New ! Dimensions: 420 x 170 x 180 mm

power capacity: 2,2 kW volt: 380 V ampere: 5,3 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 13/19 kW -Speed: 730/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 670/357/H440 mm -Weight: 198 kg

Gear motor, electric motor, three-phase motor -Speed: 61.3 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 28 mm -Protection class: IP 54 -Dimensions: 200/200/H425 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 7.5 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 50 mm -Protection class: IP 55 -Brake: 24 V -Dimensions: 820/320/320 mm -Weight: 100 kg

Hydraulic motor, axial piston hydraulic motor MW-HYDRAULIK, Maschinenwerke Frankfurt a. M. , W. Ullrich GmbH HM 7 ( HM7 ) p: max. 100 bar q: 51.3 cm3/revolution M: max. 80 Nm at 100 bar n: max. 1000 rpm shaft diameter: Ø 22 mm Wavelength: 50 mm groove width: 6 mm flange diameter: Ø 70 / 110 mm bolt circle diameter: Ø 92.5 mm 4x threaded hole: M8 x 1.25, depth: 25 mm Hydraulic connections: 2x 1/2 ( inches ), 1x 1/4 ( inches ) New ! Dimensions: 275 x 120 x 110 mm

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

Hydraulic Motor, Gear Motor ORSTA 20/20.20 0-110 TGL 37070 ( TGL37070 ) rated torque: 57 Nm Speed range: 240 - 3000 rpm Rated speed: 1500 rpm Nominal pressure: 20 MPa ( 200 bar ) Nominal displacement volume: 20 cm3 Shaft: Ø 25 mm, with taper 1 : 10 thread: M16 x 1.5 flange: 156 x 132 mm New ! Dimensions: 205 x 135 x 160 mm

Gear motor, angular gear motor, electric motor Electric gear motor -Angular gear motor -Motor power: 0.55 kW -Speed: 104 rpm -Shaft diameter: 20 mm -Construction: B5 angle -Brake -Number: 2x motors available -Price: per piece -Dimensions: 485/240/H160 mm -Weight: 20 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.16/0.3 kW -Diameter shaft: Ø 20 mm -Construction: B3 -IP protection -Dimensions: 360/160/H175 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 76 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 425/220/H210 mm -Weight: 26 kg

Axial piston motor, hydraulic motor ORSTA 314 685 ( 314685 ) 200-16-12 TGL 10865 P max 200 bar n max 1500 rpm shaft Ø 35 mm flange Ø 280 mm New !' Dimensions: 470 x 300 x 280 mm

sheet width: 1350 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.0 mm no. of strokes: max. 35 Hub/min cutting angle: 2.0 Grad table height: 945 mm distance between columns: 1361 mm Control: CIDAN / SIEMENS engine output: 5.5 kW weight of the machine ca.: 1400 kg range L-W-H: 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display Target / actual value stop value input stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF) The data for this ad was created with ModulMWS - t ...

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/340/H304 mm -Weight: 70 kg

Gear motor, electric motor, electric gear motor -Speed: 200 rpm -Power: 0.055 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 44 -Dimensions: 290/150/H135 mm -Weight: 5.3 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 358-1850 rpm -Motor: adjustable -Shaft: Ø 11 mm -Construction: B5 -Number: 1 motors available -Dimensions: 300/180/H190 mm -Weight: 9.8 kg

Pneumatic Swivel Motor ECKART SZ ND6.100-50(90)/Z1B/Z2 006-13333 14715 Pmax: 6 bar shaft: Ø 20 mm flange: Ø 145 mm used, tested ! Dimensions: 275 x 145 x 220 mm

AEG three-phase motor electric motor / 4 KW / 1410/1710 minProduct descriptionManufacturer: AEGType: AM 112 MZ 4Condition: used, baker's conditionDetails see pictures.

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 465-2325 rpm -Motor: adjustable -Design: B5 angle -Drive shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 545/210/H180 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Speed: 4.0 rpm -Power: 0.55 kW -Diameter shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 755/240/H240 mm -Weight: 44 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 500/150/H280 mm -Weight: 20 kg

Spiral casing circulation pump without motor, water pump, centrifugal pump, chemical pump KSB HPK-LS 080-200 year 2011 Q: 56.5 m3/h H: 11.9 m n: 1440 rpm New ! Dimensions: 640 x 380 x 450 mm

Roller conveyor curve 90 degrees Condition: Used Model: Rollers Type: 90 degrees Total width outside: approx. 1840 mm Total width inside: approx. 1080 mm Width incl. motor: approx. 630 mm Conveyor width: approx. 500 mm Roller spacing: approx. 100 mm Wheelbase: approx. 60 mm Plastic castors Material: Steel, Plastic, Aluminum Color: Light Gray, Black SEW motor included Stock: 2 pieces Price per piece Internal Article Number: 2026032601 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent p ...

Gear motor electric motor -Speed: 125 rpm -Power: 0.44 kW -ED: 60% -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake -Dimensions: 410/260/H225 mm -Weight: 22 kg

Gear motor, electric motor -Speed: 57/114 rpm -Power: 1.1/1.8 kW -Construction: B5 angle -Diameter hollow shaft: Ø 28 mm -Protection class: IP 54 -Brake -Dimensions: 570/250/H250 mm -Weight: 37 kg

Progressing cavity pump with motor FEUERLÖSCHGERÄTEWERK JÖHSTADT AM9-32/40/4.2Cr V: 0.96 m3/h h: 40 m motor: 0.55 kW 220 / 380 V New ! Dimensions: 790 x 200 x 250 mm

Roller conveyor curve 90 degrees Condition: Used Model: Rollers Type: 90 degrees Total width outside: approx. 1840 mm Total width inside: approx. 1080 mm Width incl. motor: approx. 630 mm Conveyor width: approx. 500 mm Roller spacing: approx. 100 mm Wheelbase: approx. 60 mm Plastic castors Material: Steel, Plastic, Aluminum Color: Light Gray, Black SEW motor included Stock: 2 pieces Price per piece Internal Article Number: 2026032601 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent p ...

Centrifugal pump without motor, water pump chemical pump KSB ETABLOC GN 50-125/322 EX year 2001 Q: 60 m3/h Q: 60 m3/hbr /br / H: 13 m n: 2880 rpm Hollow shaft diameter: Ø 28 mm Intake: NW 65 Output: NW 50 New !' Dimensions: 460 x 530 x 410 mm

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 182 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -with electrical separating coupling KEB type Combibox -Dimensions: 620/200/H260 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 520/250/H220 mm -Weight: 26 kg/piece

Centrifugal pump without motor, chemical standard pumps with shaft sealing, water pump DICKOW PUMPEN NCLs65/200 year 1992 Q: 30 m3/h H: 12 m n: 1450 rpm impeller diameter: Ø 200 mm Shaft diameter: Ø 32 mm New ! Dimensions: 600 x 360 x 460 mm

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Tennant, Permanent Magnet Motor Type 377425 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Gearbox: Regal-Beloit 7722703-SJ -Translation: 7.5 : 1 -Shaft: Ø 19 x 35 mm -Dimensions: 395/210/H195 mm -Weight: 21 kg

adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm -Design: B5 -Number: 2 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Gear motor, electric motor -Speed: 79 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 415/250/H250 mm -Weight: 26 kg

Displacement pump without motor, rotary piston pump, food pump, chemical pump FRISTAM PUMPS FKL 75 FKLS 75 Qmax: 21 m3/h Pmax. : 35 bar Nmax.: 600 rpm DN65 Stainless steel pump ! used ! Dimensions: 720 x 540 x 570 mm

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Handover: in its current condition as inspected -Housing: Damage/corrosion, see pictures -Manufacturer: Ohio Electric Motors, Permanent Magnet Motor -Type: C-561339X8829 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Transmission: Browning Part No. 20QC56L -Translation: 7.5 :1 -Shaft: Ø 19 x 35 mm/Ø 25 x 30 mm -Dimensions: 395/210/H195 mm -Weight: 21 kg

Three-phase motor, electric motor -Replacement motor for geared motor type: SS140HF-71S/4 -Power: 0.26 kW -Speed: 1400 rpm -Shaft: Ø 15 mm gear -Design: B14 -Protection class: IP 55 -Dimensions: 250/140/H175 mm -Weight: 5.35 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.55 kW -Speed range: 64-218 rpm -Motor: adjustable -Drive shaft: Ø 19 mm -Construction: B3/B14 -Number: 1 piece of motors available -Price: per piece -Dimensions: 570/180/H270 mm -Weight: 20 kg

Gear motor electric motor -Speed: 137 rpm -Power: 0.25 kW -Coupling: 24 V -Construction: hollow shaft angle B5 -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Dimensions: 440/160/H180 mm -Weight: 14 kg

Gear Pump, Transfer Pump with Motor and Filter WMW, ORSTA A20-25-63 VS Pump: AC 1,6 TGL 17-747407 Qmax: 1.6 l/min pmax: 6.3 bar engine: Type 1260.1/1 0.06 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 460 x 250 x 170 mm

Geared motor, electric motor, electric geared motor, aseptic motor -Manufacturer: SEW-Eurodrive, geared motor aseptic motor type WAF30 DAS80K4/TF/IS -Speed: 173 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 100 mm, built-in shaft Ø 15 x 30 mm -Flange: Ø 120 mm -Recess: Ø 80 mm Protection rating: IP66 -Number: 2x geared motors available Price: per piece -Dimensions: 385/150/H210 mm -Weight: 14 kg/pc.

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft: Ø 14 mm -Design: B5 -Number: 4 motors available -Price: per piece -Dimensions: 460/200/H200 mm -Weight: 22 kg

AC motor with 2 speeds, electric motor -Power: 3.3/13 kW -Speed: 725/1465 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 44 -pole switchable -Dimensions: 640/410/H330 mm -Weight: 135 kg

AC motor with 2 speeds, electric motor -Power: 2.7/10 kW -Speed: 725/1460 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 44 -pole switchable -Dimensions: 580/420/H310 mm -Weight: 112 kg

Motor drive, actuator, valve actuator SAUTER A 33 W 1 B 1107 220 V AC Holding torque: 25 Nm Runtime for 90° rotation angle: 30 s Rotation angle adjustable ! New !' Dimensions: 240 x 190 x 160 mm

Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, gearmotor type WAF20 DR63S2/TF -Speed: 332 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 110 mm /Shaft Ø 15 x 30 mm -Protection class: IP55 -Number: 2x gear motors available -Price: per piece -Dimensions: 360/190/H250 mm -Weight: 7.7 kg/piece