elektr used for sale

Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.

Electron welding system under VACUUM 2001 (modernized in 2010) Factory No.: 6201120

Key data: 1280

Vertical tempering furnace Electric 1280°C Nabertherm N5000/S Used high chamber furnace, overhaul possible on request - Tmax 1280°C - Capacity 5000 liters - External dimensions w x d x h 1600 x 2200 x 4000 mm - Net weight 7000 kg - Rated power 198 KW - Documentation Viewing possible by appointment at any time.

FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine, manufactured in 2003 in Germany, is used in the processing of thermoplastics by injection moulding. The robust steel construction is equipped with first-class components, characterised by high reliability and performance. The FERROMATIK MILACRON EE155 machine works with injection moulds with a height between 200 and 590 mm, which are mounted on 780 x 780 mm platens and closed with a force of up to 155 tonnes. The combination of the high closing force with a 45 mm diameter screw, rotating at 250 rpm, guarantees the best quality of the produced products. The total weight of the injection moulding machine is 7800 kg. Technical parameters of the FERROMATIK MILACRON ELEKTRA 155 injection moulding machine - clamping force: 155 t (1550 kN) - screw diameter: 45 mm - maximum screw speed: 250 rpm - screw stroke: 200 mm - mould ...

Universal cylindrical grinding machne TACCHELLA ELEKTRA-Evo 1018 MPC - FANUC 21i MPC, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 180 mm, Distance between centres: 1000 mm, Wheel dimension: 508x80x203,2 mm, Wheel speed: 2000 rpm - Variable and programmable, Spindle motor power: 8,2 Kw, Internal grinding spindle speed: 30.000 rpm, Weight: 6.500Kg

Rack oven Rotary oven Miwe Rollin 60x60 Electric Rack oven Miwe Rollin RI/FO 60x60 Electric -electric rack oven rotary oven -Miwe Rollin 60/60 -for 60x60cm sheets -with 2 rack trolleys included -with ramp -with Miwe DS control -Nominal input : 52.6 kW -Year of construction 2001 -2 pieces available in stock

CLAMPING FORCE: 200TON PLATEN SIZES: 810 X 810MM D.B.T.B: 570 X 570MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 510MM MAX DAYLIGHT: 1220MM EJECTOR STROKE: 150MM SCREW DIAMETER: 45MM INJECTION PRESSURE: 2300BAR STROKE VOLUME: 382CM3 SHOT WEIGHT (P/S): 348GR CONTROLS: MOSAIC MOTOR: 32KW HEATING CAPACITY: 16.6KW SCREW DRIVE: ELECTRIC CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP 67

Steinert Electric Magnet Strap Brand: Steinert 2 pieces: length frame A.A.= 1800 mm Strap width : 800 mm Drive: 1.5 kW clip-on gearbox Block : 1000 x 750 x 400mm Inclusive rectifiers. 1 piece: length frame A.A.= 2200 mm Belt width : 1000 mm Drive: 2.2 kW slip-on gearbox Block : 1400 x 950 x 450mm Inclusive rectifiers. 1 piece: length frame A.A.= 3300 mm Belt width : 1900 mm Drive: 4 kW slip-on gearbox Block : 2400 x 1800 x 600mm Inclusive rectifiers.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 180 mm Control: Fanuc 180-T grinding wheel diameter: 450 mm grinding wheel width: 80 (100) mm power capacity - grinding motor: 7,5 kW table speed -stepless-: 10 m/min grinding spindle head - swivable: +5 / -180 ° turning speed range - workpiece spindle: 10 - 800 U/min grinding head swivelling: 0 - 15 ° workpiece weight max.: 120 kg taper in tailstock-quill: MK 4 tailstock quill stroke: 35 mm dressing device: voltage: 400 V total power requirement: 18 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,75 x 2,25 x 1,80 m band filter unit: 1,75 x 1,20 x 0,80 m Serien Nr. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lenoir Brand: Lenoir Block : L= 1400 x W=1000 x H=400 mm. Power requirement block = 5 kW Inclusive rectifiers.

grinding diameter: 350 mm grinding length: 1000 mm weight of the machine ca.: 6,5 t Control: centre height: mm total power requirement: kW dimensions of the machine ca.: m cycle control grinding wheel left and right internal grinding device tail stock coolant device Technische Daten / technical details: schleifbarer Durchmesser / grinding diameter 350 mm Schleiflänge / grinding lenght 1000 mm Verfahrweg X / travel X 350 mm Verfahrweg Z / travel Z 1180 mm Schwenkbereich Schleifkopf / swivable grinding head 0-180 ° Schleifscheibenmaß links / grinding wheel dimension left 450x80x203 mm Schleifscheibenmaß rechts / grinding wheel dimension right 300x40x127 mm Antriebsleistung Schleifspindel / drive capacity grinding wheel 7,5 kW Gewicht der Maschine / weight 6500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories ...

Rack oven, quail, type Comet 1.8 IQT, electr.

Deck oven, Fabr. W & P, Type MDE 40, electr.

Electric dosing slide KISA Brand: KISA Dosing opening: 500 x 500 mm Propulsion: 0.75 kW Available on stock: 2 pieces

Manufacturer: Stöber, Type: Elektrinikkarte, Model: FAS1015, Serial number: PF6-U1,

Tiller head, control panel, control unit -Control unit: Steering wheel control unit complete for electric forklifts -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 420/220/H240 mm -Weight: 11 kg

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Drive motor: Siemens -Pump 1: 220/380 V 0.09 kW -Pump 2: 440 V 0.105 kW -Number: 2 x pumps available -Price: per piece -Dimensions: 290/180/H340 mm -Weight: 8.7 kg

Slitter rewinder Neolt Electro Trim 250; good condition; cleaned and tested; Working width 2500mm; .max. Cutting thickness 0.6mm; Cutting speed 2m/s. Roll cutter Neolt Electro Trim 250; good condition; cleaned and checked; working width 2500mm; max. thikness 0.6mm; spedd up to 2m/s.

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -with electric driving unit via: frequency converter -Load capacity: 500 kg -Platform: 1500 x 800 mm -Dimension retracted: 310 mm -Dimension extended: 1000 mm -Max. Stroke: 690mm -Transport dimensions: 1500/800/H310 mm -Own weight: 234 kg

Deck oven Wachtel Infra Elektro - Electric deck oven - 6 tiers each 180x160cm - 2 pull-out cookers - Each floor can be adjusted with separate top and bottom heat - each floor with separate steam box - with exhaust hood

Electric heating plate, heating plate, heating element, preheating plate, warming plate -Manufacturer: ELKOM, electric heating plate -Type: 700x500mm -Heating power: 1000 W -Voltage: 230V -Dimensions: 700/500/H50 mm -Weight: 18.8 kg

Machine in very good condition. The machine has 2 engines (injection and dosing) after a comprehensive service, replacement of bearings and recalibration - the cost of this service alone is almost € 5,000 A large part of the closing system pins is also replaced and, what is very important, the factory defect of these machines consisting in cracking of the casting body has been removed.

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 30 t Year of construction: 2003 Screw diameter: 18 mm Spec. Spray pressure: 2500 bar Clamping unit: 300/... Clamping force: 30 t Lights spar spacing: 300 x 300 mm Aperture travel: 250 mm Max. plate spacing: 330 mm Ejector travel: 140 mm www.europnet.eu

Used electrically heated rack oven WP Rototherm for 58x78cm trays immediately available in stock. -Model: REC 1020 -for 58x78cm trays -with exhaust hood -with digital control -with drive-on ramp -Door hinge on the right -Year of construction: 1999 -Fuel: electric -Electrical data: 48 kW 400V / 230V 50Hz

3 phases, 380/660V, 110kW, 1480 rpm

Electric stool stove, Fabr. Bartscher, plate 300 mm

Key data: 3000 kN

Battenfeld EcoPower SE 300/1330 / Electric Machine Year of construction: 2012 Injection unit: Screw diameter: 50 mm Spray weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot Interface Air valve x 8 Hot runner control x6 Injection unit hardened - Bimetal Parallel Movements It is possible to change the screw diameter for fi 45, 55, 65 mm Metrics: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our service techni ...

This FERROMATIK Europe Elektra 300 Injection moulding machine was made in the year 2009 in Germany and has 58222 production hours. It is equipped with a Ferromatik-Multi-Mikroprozessor control unit. The machine has a clamping force of 3000 kN.

Article number: 27-06-003 Manufacturer: Electric Feed Guard Mint condition Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 300x300x300mm Weight: approx. 4kg Suitable for: Weiler Commodor; Condor & Intern Max. turning diameter: approx. 500mm Coverage area: approx. 200mm Accessories  Mounting arm  Limit switch with electrical connection cable Other accessories on request Price and other technical data on request

Bread slicer Wabäma Circumat Elektronik 380.220? Product:? Manufacturer: Wabäma? Model: Circumat Elektronik 380.220? Year of construction: 2000? Condition: used, functional, baker's condition? Cutting width adjustable? With a circular knife? Power supply: 2 Amp., 400 V, 0.75 kwSee pictures for details

Tampondruckmaschine - Pad Printing ColorPrint CP Year 2000 - Serial-No. 900200532 Typ CP 801-S / Typ CP 801- Druckkraft 450N / Pressure force 450N Klischeeformat, 1-Farbnutzung 80x80mm bis max. 80x200mm / Cliche format, 1-Farbnutzung 80x80mm to max. 80x200mm Druckformat jeweils ca. 30mm von der jeweiligen Klischeegroesse / Printing format each ca. 30mm von der jeweiligen Klischeegroesse Taktzahl max. 2000/h / Clock speed max. 2000/h Luftverbrauch 3-5m3/h / Air consumption 3-5m3/h elektr. Anschluss 240V / 50Hz / electrical connection 240V / 50Hz Tamponhub stufenlos elektr. 0-80mm / Padding stroke stepless electrical 0-80mm Tamponausladung 100mm / Padding nosing 100mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

weight max.: 1000 kg workpiece length: . mm work piece width: . mm Drive: elektr. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm Control: Siemens SlimLine Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 82 / 54 Nm tool taper: SK 40 distance spindle nose and table: 120 - 630 mm work table:: table surface area: 900 x 560 mm max. table load: 600 kg T-slots: 5 work height max.: 850 mm tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8,0 kg feeds:: rapid traverse: 30 m/min feed power: 5 kN feed speeds: max. 30.000 mm/min total power requirement: 32 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,0 x 5,0 x 3,0 m Documents: Coolantsystem: elektr. hand wheel: Chip conveyor: CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V The data for this ad was created with ModulM ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: TNC 426/430 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 130 Nm tool taper: SK 40 swivellable: work table:: table surface area: 1.250 x 700 mm max. table load: ca. 1.000 kg tool magazin:: number of toolpositions: 32 (2x 16) pos. tool taper: SK 40 max. tool diameter: 80 / 130 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8,0 kg feeds:: feed speeds: 1 - 15.000 mm/min rapid traverse: 30 m/min total power requirement: 60 kW weight of the machine ca.: 8,0 t dimensions of the machine ca.: 4,0 x 4,0 x 2,7 m Documents: swarf management system: Coolantsystem: elektr. hand wheel: spindle oil cooler: tool monitoring: CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - Swivel-Milling-Head The  ...

x-travel: 1.250 mm y-travel: 880 mm z-travel: 800 mm control: TNC 430 Heidenhain Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 500 Nm tool taper: SK 40 work table:: table surface area: 1.500 x 1.050 mm max. table load: 2.500 kg number of T-slots: 10 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 60 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8 kg max. total weight: 100 kg feeds:: rapid traverse ( X / Y / Z ): 15 m/min feed speeds: 10.000 mm/min total power requirement: 29 kW weight of the machine ca.: 16,0 t dimensions of the machine ca.: 7,0 x 5,0 x 3,3 m Documents: Chip conveyor: Coolantsystem: Automatic Tool Changer: elektr. hand wheel: CNC - Machining Center Vertical DECKEL MAHO - DM ...

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm control: Sinumerik 840D Siemens distance spindle /table: 100 - 500 mm Main spindle:: turning speeds: 8.000 min/-1 power capacity - main spindel: 10,5 kW tool taper: HSK 63 spindle diameter in front bearing: 70 mm work table:: table surface area: 1.000 x 560 mm max. table load: ca. 1.000 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: HSK 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg feeds:: rapid traverse ( X / Y / Z ): 35 m/min total power requirement: 31 kVA weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,5 x 3,0 x 3,0 m Documents: Chip conveyor: Coolantsystem: Automatic Tool Changer: elektr. hand wheel: CNC Machining Center Vertical HERMLE - C 800 V - Top-Condition ! - WITHOUT vices / WITHOUT tooling The data for this a ...

measuring range X-axis: 520 mm measuring range Y-axis: 500/800 mm Table dimensions: 800 mm dimensions of the machine ca.: 2,5x1,2x1,8 m Total weight, approx.: 1300 kg Schnellverstellung: CNC, motorisch oder selektive Einhandbedienung. Feinverstellung: µ-genau mit CNC oder elektr.Handrädern Schneidenabtastung: CCD-Kamera mit telezentrischem Obejektiv Messsteuerung: KELCH-EASY WEBSET auf Basis IPC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 19 / 28 kW max. Torque: 121 Nm tool taper: SK 40 DIN 69871 b - axis: 0,001 ° pallet changer:: numbers of pallets: 2 size of pallet: 800 x 630 mm pallet diameter: Ø 800 mm max. table load: 800 / (1.600) kg rotatable: C: 360 ° resolution: 0,001 ° max. table speed: 13,6 U/min T-slots: 50 H6 tool magazin:: number of toolpositions: 60 pos. tool taper: SK 40 DIN 69871 max. tool diameter: 100 mm max. tool-dia with free toolbox: 160 mm max. tool length: 350 / 315 mm max. tool weight: 10 kg feeds:: feed speeds: 20 - 15.000 mm/min rapid traverse: 50 m/min total power requirement: 59 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,0 x 7,0 x 2,7 m Documents: Coolantsystem: high pressure cool ...

x-travel: 1.200 mm y-travel: 500 mm z-travel: 600 mm control: iTNC 530 HSCI Heidenhain Main spindle:: turning speed range - main spindle: 30 - 6.000 min/-1 power capacity - main spindel: 30 kW max. Torque: 143,2 Nm tool taper: SK 40 DIN 69871 / A internal coolant system feed: work table:: table surface area: 1.270 x 500 mm max. table load: - kg number of T-slots: 4 T-slot - width: 14H9 mm T-slot - distance: 125 mm 4th Axis: RTA 2-300 Tool-Presetter:: number of toolpositions: 22 pos. max. tool diameter: 85 mm max. tool-dia with free toolbox: 135 mm max. tool length: 400 mm max. workpiece weight: (L=400mm) 5,5 kg max. workpiece weight: (L=200mm) 8,0 kg total power requirement: 55 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 4,9 x 2,3 x 2,7 m Documents: Coolantsystem: high pressure coolant: 30 bar through spindle coolant: paper band filter: interface 4. axis: 4 ...

x-travel: 2.940 (2x 1.220) mm y-travel: 500 mm z-travel: max. 800 mm Control: TNC 426/430 Heidenhain distance spindle nose and table: V: 0 - 770 mm distance spindle nose and table: H: 180 - 980 mm Main spindle:: turning speed range - main spindle: 80 - 8.000 min/-1 power capacity - main spindel: 40 kW max. Torque: 191 Nm spindle diameter in front bearing: 70 mm swivellable: +/- 90 ° tool taper: SK 40 work table:: table surface area: ca. 3.340 x 650 mm T-slots: 14 H9 mm max. table load: 600 kg Tool-Presetter:: number of toolpositions: 22 pos. tool taper: SK 40 change-time tool to tool: 5 sec change-time chip to chip: 9 sec max. tool diameter: 85 mm max. tool-dia with free toolbox: 135 mm max. tool length: 400 mm max. workpiece weight: 8 kg feeds:: rapid traverse ( X / Y / Z ): 25 / 25 / 20 m/min Feed x / y / z: 1 ... 9.999 mm/min feed power: 9 kN total power requirement: 69 KVA weigh ...

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm control: TNC 430 Heidenhain Main spindle:: turning speed range - main spindle: max. 10.000 min/-1 power capacity - main spindel: 7 / 9 kW tool taper: ISO 40 spindle bearing diameter: 70 mm measuring system: direct Resolution: 0,001 mm swiveling-rotary-table:: table surface area: Ø 280 mm max. table load: 250 kg Swivel range: +/- 110 ° rotatable: 360 ° Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 (125) mm change-time chip to chip: 5,5 sec feeds:: rapid traverse ( X / Y / Z ): 35 / 35 / 35 m/min feed speeds: 1 - 30.000 mm/min Feed force: 6 kN total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 3,5 x 2,8 m Documents: chip tray: Coolantsystem: hydraulic system: test probe: TS 632 elektr. hand wheel: Automatic Tool Changer: 30 pos. full splash guard: 5  ...

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: 840 D sl ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 max. Torque: 83 / 57 Nm tension force: 8 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - distance: 100 mm T-slot - width: 4x 14H12 / 1x 14H7 mm max. table load: 600 kg table height over floor: 720 mm distance spindle nose and table: 120 - 580 mm Tool-Presetter:: number of toolpositions: 20 pos. Max. mould width: 80 / (130) mm max. tool length: 250 mm max. tool weight: 6 kg max. total weight: 80 kg change-time tool to tool: 1,6 sec change-time chip to chip: 6,0 sec feeds:: rapid traverse: 30 m/min feed speeds: max. 30.000 mm/min Feed force: max. 5 kN total power requirement: 23 kVA weight of the machine ca.: 4,5 t dimensions of the machine ...

max. turning diameter: 580 mm turning length: 1500 mm control: OSP 7000 L greates pass round over bed: 610 mm swing diameter over slide rest: 580 mm Main spindle:: turning speed range - main spindle: 12 - 2.800 min/-1 spindle bearing diameter: 150 mm spindle bore: 110 mm spindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kW C-Axis: 0,001 ° axis stroke:: x-axis: 598 mm y-axis: 230 (+110 / -120) mm z-axis: 1.660 mm feeds:: rapid traverse: X / Y: 12.000 mm/min rapid traverse: Z: 20.000 mm/min rapid traverse: C: 100 min/-1 cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/U turret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos. driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1 tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock:: diameter of quill: 120 mm quill stroke: 170 mm taper of center:  ...

x-travel: 650 mm y-travel: 600 mm z-travel: 500 mm control: Sinumerik 840 D pl Siemens Main spindle:: turning speed range - main spindle: 20 - 28.000 min/-1 power capacity - main spindel: 23 / 18 kW max. Torque: 79 Nm tool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mm Swivel range: A: +30° / -115 ° rotatable: C: 360 ° max. table load: 500 kg max. workpiece sizes: Ø 630 x 313 mm table speed: A:25 / C:65 min/-1 Tool-Presetter:: number of toolpositions: 117 pos. max. tool diameter: 90 (125) mm max. tool length: 300 mm feeds:: rapid traverse ( X / Y / Z ): 60 m/min Accelaration: 10 m/s² feed power: 8,5 kN total power requirement: 43 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 8,5 x 5,5 x 3,0 m Documents: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 p ...

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...

turning diameter over bed: 1450 mm turning diameter over slide rest: 1070 mm turning length: 7000 mm turning speeds: 2,24-450 U/min Control: faceplate: 1400 mm spindle passage: 160 mm steady: 400 mm drive capacity - workpiece: 63 kW Tail stock:: elektr. diameter of quill: 200 mm bed width: 950 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Hochleistungspumpe für Hochviskose Flüssigkeiten, Type: Siemens, Year: ca.2005, Control: Schaltschrank, Elektr. pump: yes, FREE TEXT: Motorleistung 1,8 kw/50 Hz, Year :ca.2005

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm control: Sinumerik 810 D Siemens Main spindle: turning speed range - main spindle: 20 - 8.000 U/min power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 work table:: table surface area: 800 x 500 mm max. table load: 500 kg Set-up hight: max. 240 mm number of T-slots: 5 T-slot - width: 14 H12 mm T-slot - distance: 100 mm distance spindle nose and table: 150 - 650 mm feeds: feed speeds: X, Y, Z: 30.000 mm/min rapid travel ( X / Y / Z ): 30 m/min Tool-Presetter:: Tool changer: 24 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 7 kg total power requirement: 30 kVA weight of the machine ca.: 4 t dimensions of the machine ca.: 4,0 x 3,5 x 2,7 m Documents: Coolantsystem: elektr. hand wheel: div. tool holder: Vice: 1x CNC-Machiningcenter Verti ...

turning diameter: max. 1.070 mm turning length: max. 3.076 mm control: Fanuc 31iB5 MAPPS max. swing diameter: 1.070 mm Max. distance between centres: 3.510 mm axis stroke:: x-axis: 1.040 (1.000 + 40) mm y-axis: +/- 330 mm z-axis: 3.150 mm b-axis: +/- 120 ° z-axis: 2: max. 2.440 mm Main spindle:: max. spindle speed: 1.500 min/-1 Number of speed ranges: 2 power capacity - main spindel: 30 / 26 kW max. Torque: 3.254 Nm spindle bearing diameter: 260 mm spindle bore: 185 mm max. usable bar diameter: 164 mm C-Axis: 0,0001 ° spindle nose: JIS A2-15 Subspindle:: max. spindle speed: 1.500 min/-1 Number of speed ranges: 2 power capacity - Sub spindle: 30 / 26 kW max. Torque: 3.254 Nm spindle bearing diameter: 260 mm spindle bore: 185 mm max. usable bar diameter: 164 mm C-Axis: 0,0001 ° spindle nose: JIS A2-15 Work tool spindle:: Max. rpm: 8.000 min/-1 power capacity: 30 / 22 kW max. Torque: ...