elektr used for sale

Ferromatik Milacron Elektra EE110-300 Evolution from 2006 Control panel : Mosaic Working hours 79 488 h (03/03/2021) Screw diameter : 30 mm All the information are taken from the documentation of the manufacturer (attached in the pictures). Machine in good running condition. All electric machine. Moulds running on the machine are toy moulds running ABS parts. Machine spec sheets attached.

well preserved electric motor Technical data Power 380 volts around 13 KW Maps about 1150 RPM Weight approx. 105 kg

Probe FEINMESSZEUGFABRIK SUHL ELEKTRO COMPAR Accuracy: 1 μm ( 0.001 mm ) Diameter: Ø 28 mm Length: 170 mm used, tested ! Dimensions: 170 x 85 x 28 mm

Completely new elektromotor available. It has a power 160kW, 1480 rpm and mass 1130kg.

Meßtaster FEINMESSZEUGFABRIK SUHL ELEKTRO COMPAR Accuracy: 2 μm ( 0.002 mm ) Measuring length: 2 mm Measuring tip: Ø 6 mm Diameter: Ø 8 mm Total length: 122 mm approx. 0.7 m Connection cable New ! dimensions ( without cable ): 122 x 37 x 14 mm

Meßtaster FEINMESSZEUGFABRIK SUHL ELEKTRO COMPAR Accuracy: 1 μm ( 0.001 mm ) Measuring length: 3 mm Measuring tip: Ø 6 mm Diameter: Ø 28 mm Total length: 157 mm used, tested ! Dimensions: 157 x 80 x 28 mm

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block, double block -Manufacturer: Siemens, Simatic C1 double block electronic module -Type: 6EC1 660-3A -Number: 1x module available -Price per piece -Dimensions: 65/20/H100 mm -Weight: 0.1 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block, double block -Manufacturer: Siemens, Simatic C1 double block electronic module -Type: 6EC1 700-3A -Number: 1x module available -Price per piece -Dimensions: 65/20/H100 mm -Weight: 0.1 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block, double block -Manufacturer: Siemens, Simatic C1 double block electronic module -Type: 6EC1 111-3A -Number: 1x module available -Price per piece -Dimensions: 65/20/H100 mm -Weight: 0.1 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block -Manufacturer: Siemens, Simatic C1 single block electronic module -Type: 6EC1 653-3A -Number: 3x module available -Price per piece -Dimensions: 65/10/H100 mm -Weight: 0.1 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block -Manufacturer: Siemens, Simatic C1 single block electronic module -Type: 6EC1 110-3A -Number: 3x module available -Price per piece -Dimensions: 65/10/H100 mm -Weight: 0.1 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block -Manufacturer: Siemens, Simatic C1 single block electronic module -Type: 6EC1 040-3A -Number: 1x module available -Price per piece -Dimensions: 65/10/H100 mm -Weight: 0.1 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block -Manufacturer: Siemens, Simatic C1 single block electronic module -Type: 6EC1 000-3A -Number: 3x module available -Price per piece -Dimensions: 65/10/H100 mm -Weight: 0.1 kg

Electronics cables, extension cables, electronics cables -Manufacturer: Helukabel -Type: TRONIC-CY 4X0.25 QMM -Length: 1030 m -Number: 4x wires á 0.25 mm² -Price: complete -Dimensions: 495/495/H320 mm -Weight: 40 kg

BBC electromotor Type: S08 500 yb 4 Power: 805kW n: 1485 1/min Voltage: 10.250V Weight: 4200kg

Description: Machine no.: 01222000038 Spare part no. 1900 0710 12 As good as new Approx. Onsite Dimension. (l x w x h): 250 x 200 x 60 mm, weight approx.: 1 kg

technical data: Make: Siemens Types: 006 725 - 4 Type No: E 50804955 Connection: 22.5 A / 21.0 A / 19.6 A kW: 4 kW / 4 kW / 0.032 kW Rpm: 4300 rpm / 2850 rpm / 23 rpm Built-in Siemens engine: Type: 1 LP 2015 - 2AA / Type No: E 5078685 Connection: Star 380/220 kW: 0.18 RPM: 2710 Remark: Tropical Festival

Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12

Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930

Unused charging equipment for electric forklifts 48 Volt 120 A Processor-controlled BAE Duo loader with electrolytum woe Price on request More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price Varta Hawker Migatronik Still Linde Wagner

For sale 6 electrics CROWN in the package! (Hours of operation between 500-1200!) Special price!

Attention Clearance Sale We need space, therefore we offer an price of 0,7 € / kg We have many used electric motors from different sice an manufaktors for sale. Condition of the electric motors is seen on the pictures. We sell this units only to dealers for export without warranty.

with hood including fan with Gaer schrank 4 herds each 60x80cm long ago any stove with stone slab manual control with fixed water connection for each floor separately Each floor with separate swath box Fermentation chamber control manually Each floor with viewing glass Each floor with lighting Connection per stove 4.65 kW 400 Volt 3/N/PE 50 Hz Furnace is mobile on wheels checked and cleaned The furnace is fully assembled ready for loading in stock.

Used oven MIWE, type: Electric 5.1820 DS -In bakery condition- - DS control - Haze hood with fan - Condition: Good, ready to use - Delivery costs: on request - Number of flocks: 5 pieces Baking area per stove: 1.80 x 2.00 m Total baking area: 18m2 Electrical power: 112 kW The oven is in good condition and ready to use. Visit and test run on request. A dismantling is necessary and can be taken over by us.

Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg

Bread cutting machine Wabäma Signa Elektronik 460.10 SB Bakery -Self-service machine for Supoermarkt SB Shops -Built in 2010 -Cutting width 10mm -400 volts Rated power 750 watts -Weight 200 kg

electrically operated chamber furnace with air circulation , as good as new electric heated chamber furnace with air circulation, as good as new Type: EKO - 60/40/150-36 Year built/year: 2010 Fabr./ make: IOB Aue/ Germany Working space/ inner space 600 x 1500 x 410 mm Temperature range/ range of temperature: 500°C Connection value Electr./ electr.power: 38 kW Weight / weight: about 2.5t https://www.west-cs.de/produkte/modelle/ks-90-1-einkreisregler/

electromagnetic round table 200 mm WMW

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Key data: 450 , 450 , 600

Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.

Key data: 260 , 1250 , 1250

Circulating air chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and run-inchins Demonstration device, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs per 20 segments freely programmable -NtLog for controller Record data via USB stick -Temp. Uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air volume flow 125m³/h -Additional equipment: Motor-closing fresh air and exhaust air flaps Entry rails -Connection power 31.2 KW -Net weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We are happy to offer installation and commissioning.

table length: . mm table width: . mm table height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m electrical, tiltable welding table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quality: / / Electric lifting magnet 2500kg see photos and lifting table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

Ferromatik Milacron Elektra 300 S Electric injection moulding machine Machine in very good condition.

Ferromatik All-Electric Elektra series machine Control panel : IQT Injection Shot Weight (mm) : 120 Robot Interface : Euro Robot Interface: Yes Ejector Back Verification: Yes Interface For Colour Feeder: Yes Intergrated Hot Runner System: No Solonoid Operating Pneumatic: Yes Pneumatic Delivery Chute: No Shut-Off Nozzle: No Core Pulls: No

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Milacron Elektron EE75-450 Electric injection moulding machine From 2011 Machine is in running condition.

3 phases, 990 rpm, 90kW, 380/660 ☆ƴ, slow speed

FIG 11 -12.7 kW electric motor, 2900 -3500 rpm

centre height: / mm O. 600 mm Weight: 340 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 10-1/1 Electric model with 10 shelves GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The device has been tested in our in-house specialist workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The RRP. amounts to 15.090 € net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional and competent advice - before and after the purchase •Free shipping within Germany (excl. islands/mountain stations) • Pr ...

This FERROMATIK Europe Elektra 300 Injection moulding machine was made in the year 2009 in Germany and has 58222 production hours. It is equipped with a Ferromatik-Multi-Mikroprozessor control unit. The machine has a clamping force of 3000 kN.

Electrode heater make KÜPPERSBUSCH type SET 10Machine -No: 1937 built in 1980Technical specifications:Internal dimensions approx: 230 x 250 x 470 mmControl voltage: 220 VPower: 2.0 kWExternal dimensions approx .: 410 x 370 x 690 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools