electronic motors used for sale

Manufacturer: Pilz Zentraleinheit C-P8-ZE-32, Type: 32 K, Model: 306097,

Manufacturer: Umrichter unbekann, Type: JNTKBCBA7R50BE-UF, Size: 5,5 kw, kVA: Amper 13,

As good as new unused Auction-ID: A7-50255-22

Manufacturer: Eltec Homag Karte, Type: Karte Seco 6 X RS 232, Model: Schnittstellenkarte, Serial number: 4-086-05-038,

Manufacturer: Homag, Type: Konvertierungskarte CPU/30/E16 4 x RS, Serial number: 4-086-05-0241, Year: 19.10.1994 K.kraft, Year :19.10.1994 K.kraft

Manufacturer: Siemens, Type: SITOP power 20, Serial number: 6EP1 436-2BA00, Power Input: 50/60Hz, Power Output: 22,8-26,4V,

Manufacturer: Indramat, Type: DDS03.1-W050-D, Model: FWA-DIAX02-ASE-02VRS-MS, Serial number: SN268778-18301,

Manufacturer: Siemens, Type: Simodrive , Model: LT-Modul, Serial number: 6SN1123-1AB00-0CA1,

Manufacturer: Commander SE, Type: SE 23400220, Model: SE 3,5 T, Serial number: 2083802671, Frequency converter: yes, mH/Hz: 0-1000, FREE TEXT: 380-480 Volt, Free text 1: 2,2 kw, Free text 2: 9,0-5,0 Ampere,

As good as new unused Auction-ID: A7-50255-26

Used and untested Auction-ID: A7-50255-13

Auction-ID: A1-50260-119

Auction-ID: A1-50093-173

Manufacturer: Commander SE, Type: SE 23400400 SE 5,5 T, Serial number: 2083802671, FREE TEXT: 4 kw, Free text 1: 50-60 Hz, Free text 2: 0-1000 Hz, Free text 3: 14-9,5,

Manufacturer: Perske Bohrmotor mit Getriebe, Systemconfiguration: Raster 16mm, mH/Hz: 200 Hz, Output PpK= kW: 1,0 Kw, FREE TEXT: ca.60 mm hub,

Manufacturer: SGG 1.2 Speichermodul, Serial number: 0607/8/70, Output DC Volt: 220 V, FREE TEXT: 24 Volt Stromversorgung,

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Siemens Card , Type: GE.548229.0001.00, Model: 548 229 9001, Serial Number: 3823,

Auction-ID: A1-50275-174

Auction-ID: A1-50275-74

Auction-ID: A1-50275-114

Auction-ID: A1-50275-93

Manufacturer: Homag, Type: 2 Achser HC 010 o.Analogeingang, Model: 2-Achser F.mini-Controller Rev, Serial number: 2-083-02-8071,

Manufacturer: Homag, Type: CPU PC Controlleinheit, Model: 5003, Serial number: 2-083-01-6902,

Manufacturer: Biesse, Type: 24 Volt Steuerspannungversorgungsmodul, Model: CNI, Serial number: AL SW 70, Systemconfiguration: Elemc Tar.8-14,5 V,

Manufacturer: Homag, Type: Homatic Streckenprozzesorkarte, Model: 2-083-02-7013,

Manufacturer: Commander SE Frequenzumrichter, Type: SE 23400150 SE 2.5 T, Serial number: 3781484007, FREE TEXT: kw 1,5, Free text 1: 50-60 Hz, Free text 2: Ampere 6,4-4,2,

Manufacturer: Siemens Tatstatur, Model: S 5 395, Serial number: 6E S 5395-0UA11, Systemconfiguration: FN-Nr. V11-98, Serial number: HX 88 03 321 S,

Auction-ID: A1-50275-118

Auction-ID: A1-50275-138

Auction-ID: A1-50275-107

Auction-ID: A1-50275-121

Manufacturer: Commander SE Frquenzumrichter, Type: SE 23400150, Model: SE 2,5 T, Serial number: 3781643022, Hz: 0-1000, FREE TEXT: kw 1,5, Free text 1: Ampere 6,4-4,2,

Manufacturer: Telemecanique Schneider Steuerung, Type: TSX DMF 242A, Freitext 14: mit Spannungsversorgungsteil 24 Volt,

Manufacturer: Homag, Type: Eingangskarte 32x24V, Model: 2us nach + schaltend PNP, Serial number: 2-083-01-5005, Year: 1995, Nur Abholung : 200, Sale without warranty: yes, Installation height: Preis ist für 1 Stück, Year :1995

Manufacturer: Lenze, Type: EMB 8251-, Seriennummer: 0174, Produktionsnummer: 45173402, Bremsgerät: yes, ID.Nummer: 00387113, Power Input: 375 V/Imax 5,4 Ampere, Output Pav= Watt: 70, Output PpK= Kw: 2, geprüft: yes, Gebraucht: yes, Gewichtcht kg ca.: 0,5, Standort 32469 Petershagen: yes, Preis Stück Euro: 35, Preis zzgl. Versand: yes,

Auction-ID: A1-50529-727

Auction-ID: A1-50275-73

Auction-ID: A1-50529-730

Version H Auction-ID: A1-50529-700

chucking diameter: 250 mm greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 850 / 1350 mm weight of the machine ca.: 2700 KG dimensions of the machine ca.: 2900 x 1953 x 1825 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25-220/220-1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 185 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2420 kg. range L-W-H: 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change ...

Auction-ID: A1-50529-713

turning length: 1500 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52,0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1400 kg. range L-W-H: 2530 x 1000 x 1450 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine ...

turning length: 1000 mm turning diameter: 420 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 250 mm spindle taper: DIN 55029 D 1-6 taper in tailstock: 4 MK quill travel: 140 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1220 kg range L-W-H: 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Sh ...

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick- ...

turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...