137,485 used machines on RESALE, but how to find them? Machine Search
Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...
bore: 22 mm weight: 92 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding Fume Extraction LINCOLN NORWELD SP-3M Flow rate: 300 m3/h motor: 2.2 kW 380 V Dimensions: 1200 x 630 x 870 mm used, tested !
bore: 16 mm weight: 13 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mm weight: 109 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding Fume Extraction KEMPER 91710110 year: 1996 Operating hours: 12880 h Volume flow: 240 m3/h 1,1,1,000 1 kW 230 V Dimensions: 620 x 350 x 640 mm used, tested !
Welding cylinder, pneumatic cylinder VBS M13010579 stroke: 130 mm rod diameter: Ø 35 mm New ! Dimensions: 425 x 115 x 48 mm
bore: 22 mm weight: 214 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding Fume Extraction LINCOLN NORWELD DF-500 Volume flow: 500 m3/h System pressure: 1000 mm/Wg ( mm water column ) - approx. 0.0.000 mm 098 bar Fan speed: 9200 rpm Operating voltage: 380 V 3AC Power consumption: 5.5 kW connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm motor: ATB 132S 5.5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm
bore: 16 mm weight: 24 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mm weight: 41 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding cylinder, pneumatic cylinder VBS KN155591 stroke: 100 mm rod diameter: Ø 35 mm New ! Dimensions: 365 x 115 x 48 mm
Welding cylinder, pneumatic cylinder VBS M13010577 stroke: 80 mm rod diameter: Ø 35 mm New ! Dimensions: 325 x 115 x 48 mm
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg
Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.
An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.
Welding cylinder, pneumatic cylinder VBS M13010407 stroke: 35 mm rod diameter: Ø 35 mm New ! Dimensions: 180 x 115 x 48 mm
Welding cylinder, pneumatic cylinder VBS M13014322 stroke: 35 mm rod diameter: Ø 35 mm New ! Dimensions: 265 x 95 x 70 mm
used
Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 635 212.433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg
used
Manufacturer: Rudholzer Type of Machine: Welding machine Year of Manufacture: 2018 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 3, Height 4 (cm or m) - Weight 4000 kg - Voltage 400 Volts - Current 83 Amperes - Power 57.6 (Kw or KVA) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.
Welding cylinder, pneumatic cylinder VBS M13014400 stroke: 60 mm rod diameter: Ø 35 mm New ! Dimensions: 315 x 68 x 55 mm
Welding cylinder, pneumatic cylinder SAVAIR SV446-97 9227-0017-0065 stroke: 65 mm rod diameter: Ø 35 mm New ! Dimensions: 315 x 68 x 55 mm
Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.
Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.
Mobiele filterunit voor lichte las- en afzuigtoepassingen Luchtstroom (m³/per uur): 1050 Diameter afzuigslang (mm): 160 Filteroppervlakte (m²): 30 Geluidsniveau: 73 dB
Welding rod OERLIKON OE-2,000 5 Ni DIN 8559 ASME Sec.II/C/SFA-5.28 ER80S-NI2 Diameter: Ø 2.4 mm Length: 1000 mm Quantity: 24 kg New ! Dimensions: 1030 x 80 x 60 mm
Mobiele filterunit voor lichte las- en afzuigtoepassingen Luchtstroom (m³/per uur): 1050 Diameter afzuigslang (mm): 160 Filteroppervlakte (m²): 30 Geluidsniveau: 73 dB
A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement.
wire electrode, welding wire, welding wire -Manufacturer: Elgar, started roll of MAG wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300/100 mm -Weight roll: 10.1 kg
Ref.Nr. 00938 Commercial offer Name of the system: Coordinate welding machine Manufacturer Ideal Factory Model CSR 101 Year of manufacture 2005 Rated power 125 kVA Connected load 125 kVA Open-circuit voltage 9 V Primary voltage 400 V Nominal frequency 50-60 Hz Fuse 200 A Repairs and overhauls These would be the most important repairs. CSR 101 Timing belt for lower table renewed in 2021 Water flow monitor renewed in 2023 Maintenance hoses for cooling renewed in 2022 Welding transformer 2024 replaced and contact surfaces revised on the secondary side Secondary rectifier 2024 sealed and revised 2024 Cooling system cleaned and re-hosed, operation with Addinol Protect extra Battery for control unit renewed in 2024 Proportional valve for electrode force 2025 overhauled Condition of the system under power, can be visited by app ...
MIG Stainless Steel Welding Wire PAGUS DT 1.4316 AWS 308LSi Diameter: Ø 1.0 mm coil K300 Quantity: 12 kg New ! Dimension: 300 x 300 x 105 mm
MIG Aluminum Welding Wire ALCAN MT-AL 4043A ALSi5 3.2245 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm
A lot of welding wire; Manufacturer: BÖHLER; Total of 3 pieces; Type: UNION SG 2-H; Diameter: 1.0mm; Weight: 18Kg; further details see photos
A lot of welding wire; Manufacturer: HYUNDAI; Total of 3 pieces; Type: 70NS; Diameter: 1.2mm; Weight: 15Kg; further details see photos
Inverter and holder for ultrasonic welding machine TELSONIC Ultrasonics SE-26/20-36kHz VK / max 500 W max. converter voltage: 1500 V with holder and pneumatic lowering stroke: 40 mm suitable for S840 and S842 used, tested ! Dimensions: 470 x 80 x 115 mm
MIG Aluminum Welding Wire ALCAN MT-AL 5356 S-ALMg 5 3.3556 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm
MIG Stainless Steel Welding Wire BÖHLER SAS4-IG Si 1.4576 Diameter: Ø 1.0 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm
MIG Stainless Steel Welding Wire BÖHLER SAS2-IG 1.4551 Diameter: Ø 1.2 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm
MIG Aluminum Welding Wire MTC MT-MIGAL 1450 SG/AlMg 99.5 Ti 3.0805 Diameter: Ø 1.6mm Coil: K300 Quantity: 6kg New ! Dimensions: 300 x 110 x 310 mm
MIG Stainless Steel Welding Wire BÖHLER SAS4-IG 1.4576 Diameter: Ø 1.6 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm
A lot of welding wire; Manufacturer: HYUNDAI; Total of 3 pieces; Type: 70NS; Diameter: 1.2mm; Weight: 15Kg; further details see photos
A lot of welding wire; Manufacturer: HYUNDAI; Total of 3 pieces; Type: SM-70 eco; Diameter: 1.0mm; Weight: 15Kg; further details see photos
MIG Aluminum Welding Wire ALCAN MT-AL 5183 S-ALMg 4.5 Mn 3.3548 Diameter: Ø 1.6 mm coil: Ø 300 mm Quantity: 6.5 kg New ! Dimensions: 310 x 110 x 320 mm
Welding machine EWM MESSER TIG 350 DC 350 A 400 V Dimensions: 1000 x 520 x 900 mm
This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4 touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine.
Stainless Steel Welding Wire, MIG Wire Electrode, Solid Wire AVESTA 316LSI/SKRSI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.6 mm Coil: Ø 300 mm Quantity: 12 kg New ! Dimensions: 310 x 110 x 300 mm
MIG / MAG Welding Machine JUPITER MIG 230 230 A 400 V used ! Dimensions: 350 x 1000 x 700 mm
Stainless Steel Welding Wire, MAG Wire Electrode AVESTA 316L-SI/SKR-SI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.0 mm Coil: K300 Quantity: 15 kg New ! Dimensions: 310 x 110 x 300 mm
maximum number of results exceeded
please refine your search
100 € 
