electro hydraulic used for sale

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg

hydraulic outriggers for loader cranes Stroke 500 mm Stable design with guide via square tube Mechanically telescopic with bolt 300 mm - grid 100 mm Outer square tube 100 x 100 mm Folding device for support cylinder - can also be dismantled Outriggers can be folded down approx. 60° Retracted height 1,000 mm with folding device with integrated load holding valve Removable support plate - size 320 x 250 mm Weight 80 kg / piece - New - unused - 2 pieces in stock - unit price -

Hydraulic pump, oil pump, gear pump -Internal gear pump -System: Trochocentric -Operating pressure: 175 bar -Delivery rate: 25 cm³/rev -Dimensions: 180I168/H135 mm -Weight: 6 kg

Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg

Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg

pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg

pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor VICKERS 2520V12A8 Shaft diameter: Ø 22 mm Flange diameter ( inside ): 102 mm Bolt circle diameter: Ø 115 mm New ! Dimensions: 310 x 175 x 160 mm

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump HUGRABPUKA A10X pressure: 17.5 MPa 1500 rpm New ! Dimensions:130 x 90 x 115 mm

pressure: 100 t passage width: 810 mm stroke: 400 mm table surface area: 1140x740 mm ram surface: 1140x740 mm dayligth: 670 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1800x1800x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Pump ORSTA B 25 R ( B25R ) PT 11112 / 04

Hydraulic pump HUGRABLUKA A 18X ( A18X ) 2.5 MPa 1500 rpm New ! Dimensions: 90 x 110 x 135 mm

Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 70 mm -Piston rod: Ø 40 mm -Stroke: 360 mm -Total length retracted center center hole: 725 mm -Recording piston rod: Ø 35 x 25 mm -Recording cylinder: Ø 35 mm x 25 mm -Dimensions: 815/70/H90 mm -Weight: 15 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 80 mm -Piston rod: Ø 40 mm -Stroke: 138 mm -Holder: Ø 35 x 25 mm -Dimensions: 530/80/H115 mm -Weight: 11 kg

Hydraulic power unit with tank and radiator REXROTH pump1: 1PF2G222/16RA1MSG pump2: 1PV2V3-40/12RE01MC100A1 motor: 2.2 kW 220 / 380 V Tank: 120 l two separate pressure circuits !' used, tested !' Dimensions: 770 x 570 x 940 mm

Hydraulic power unit with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Function:single acting -Piston diameter: 90 mm -Piston rod: Ø 55 mm -Eye diameter: Ø 35 mm -Stroke: 490 mm -Number: 4x available -Price: per piece -Dimensions: 820/110/90mm -Weight: 22kg

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Hydraulic power unit PAGUS Pump: SPN 2/14 DC002/9B ( SPN2/14DC002/9B ) Motor: 5.5 KW 400 / 690 V Tank: 120 l used ! Dimensions: 1450 x 900 x 890 mm

Hydraulic oil tank -Tank height: 200 mm -Tank capacity: 3.6 L. -Dimensions: 190/350/H290 mm -Weight: 5 kg

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Hydraulic power unit PAGUS Pump: VT VOTL BOLOGNA 06 D 3 01 98 ( 06D30198 ) Motor: 3.0 kW 380 / 660 V Tank: 50 l used ! Dimensions: 1030 x 500 x 890 mm

Hydraulic power unit with pneumatic hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) Drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) motor: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm

Hydraulic power unit SCHNUPP 100 bar 90 l/min pump MOOGMOOG 0514 700 127 280 bar motor: 22 kW 380 / 660 V stainless steel tank: approx. 750 l used, tested ! Dimensions: 2300 x 1700 x 1900 mm

Hydraulic power unit ORSTA B.604.263 Delivery pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Hydraulic power unit, compact power unit BUCHER UP100K1G3-01AP100 222396001 150 bar 1.2 cm3 / U motor: 0.75 kW 1400 rpm 220 / 400 V New !' Dimensions: 460 x 240 x 200 mm

Hydraulic power unit ORSTA S4/63 P = 63 kp/cm² Q = 4 l/min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 1000 x 700 x 580 mm

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

Hydraulic power unit ORSTA with gear pump C10-2R, TGL 10859 motor: 1.1 kW used, tested ! Dimensions: 750 x 500 x 930 mm

Hydraulic power unit with tank FLUTEC PTF-200/1.0/M/ pump: BOSCH FD 071 0 513 300 101 p max = 70 bar Q = approx. 17 cm3/U motor: 2.2 kW 220 / 380 V tank approx. 100 l used, tested ! Dimensions: 650 x 550 x 1000 mm

hydraulic power unit with 40 liter tank 220 / 380 V motor: 0.55 kW IP54 used, tested ! Dimensions: 610 x 580 x 610 mm

Hydraulic power unit, micro power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) engine: 1.1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

Hydraulic power unit with radiator BOSCH 0 813 260 213 ( 0813260213 ) 2 819 042 654 ( 2819042654 ) Q : 23 / 15 l/min p: 75 bar (1088 psi) tank capacity: approx. 100 L motor: 3 kW 400 V 3AC Cooler: 0.37 kW 220 - 240 / 380 - 420 V 3AC used, tested ! Dimensions: 1250 x 7800 x 1670 mm

Hydraulic power unit with gate gate pump ORSTA pump: 16/16-1 TGL 10885 p: 16 Mpa (160 bar) V: 16 cm3/U motor: 1,1,00 5 kW 940 rpm 220 / 380 V tank: 75 l as a spare part for Hohenstein RBT400 !' used, tested ! Dimensions: 920 x 430 x 780 mm

Hydraulic power unit with tank REXROTH pump: PV2V3-30/12R1MC-100A1 p max: 100 bar (pump) Qmax: 8,50 bar 5 cm3/U Tank 60 L Motor: 1.5 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 600 x 520 x 810 mm

Hydraulic power unit HOERBIGER FLUIDTECHNIK Working pressure: 50 bar Magnetic voltage: 24 V Pump flow rate: 8 l/min Tank volume: 25 liters Motor: 0.75 kW Motor voltage: 220/ 380 V/ 50 Hz used, tested ! Dimensions: 400 x 360 x 100 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Hydraulic Power Unit With Air Operated Hydraulic Pump GRACO FIRE-BALL pump: L83 6203876 Air motor: B84 6203963 Ratio: 5:1 drive pressure: max. 12 bar Q: 10 l / min tank: approx. 10 l used, tested ! Dimensions: 260 x 250 x 650 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 28 mm -Diameter eyes: 25/35 mm -Stroke: 44 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 495/95/H105 mm -Weight: 9 kg