electrically used for sale

Robot - Angel Viper 20 Year of construction: 2015 5-axis robots: axes X, Y, Z, A, B are driven by servo motors (electrically) Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Ulma Vertical Form Fill Seal bagging machine. Mechanically Sound. Need some attention electrically to power up. Please message for more info.

• Load capacity 110 kg • Drum holder for drums Ø 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230 V

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -Manufacturer: Homag -Heating basin with roll length: 120 mm -Execution: electrically heated -Number: 1x glue basin available -Price: per piece -Dimensions: 700/620/H300 mm -Weight: 44 kg/piece

Pre-Portioner/Hopper Year of construction not known Funnel for approx. 120kg dough Sliding opening 30x60cm Inner hopper height 60cm Funnel dimensions at the top approx. 100 x 100 Funnel height top 250cm Funnel height bottom 190cm Gate valve electrically operated (230V connection) mobile

Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

adjust gear motor, electric motor, electric gear motor -Speed: 14-70 rpm -Power: 4 kW -Construction: B5 -Shaft diameter: Ø 48 x 110 mm -Protection class: IP 54 -electrically adjustable: via gear motor -Dimensions: 1100/350/H600 mm -Weight: 250 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. Sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Projection: 50 mm -Dimensions: 900/800 / H1100 mm -Weight: 250 kg

Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Power: 0.2 kW -max temperature 110° C -electrically heated -Steel lining -Weight: 7 kg -Number: several dryers available -Price per piece

Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 500 x 1055 mm -Projection: 1120 mm -Cone mount: MK4 -Motor power: 1.5/2.2 kW -Speeds: 45-2240 rpm, electrically switchable in steps -Columns: Ø 150 mm -Spindle stroke: 160 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 2000/1200/H2320 mm -Weight: 1800kg

Electric chain hoist, crane, indoor crane, assembly crane, push trolley, push trolley, crane trolley, trolley running gear, crane running gear, crane running gear, trolley -Manufacturer: Stahl, electric chain hoist with powered trolley -Crane chassis: type SU-A 1442 110 electrically driven -Carrier width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main lift: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5m -Dimensions: see photo techn. drawing -Transport dimension: 1350/1030/H1000 mm -Weight: 139 kg

Electric chain hoist, crane, indoor crane, assembly crane, push trolley, push trolley, crane trolley, trolley running gear, crane running gear, crane running gear, trolley -Manufacturer: Stahl, electric chain hoist with powered trolley -Crane chassis: type SU-A 1442 110 electrically driven -Carrier width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main lift: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5m -Dimensions: see photo techn. drawing -Transport dimension: 1350/1030/H1000 mm -Weight: 136 kg

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: Gieseking, swiveling welding rotating device, electrically driven -Load capacity: 0.5 tons -Table surface: Ø 800 mm -Chuck: Ø 315 mm -Speed: 0.125 to 3.25 rpm forward/reverse rotation -tiltable: via crank -Total dimensions: 1230/1140/H1040 mm -Weight: 510 kg

Electric chain hoist, crane, indoor crane, assembly crane, push trolley, push trolley, crane trolley, trolley running gear, crane running gear, crane trolley, trolley -Manufacturer: Unelec, electric chain hoist with powered chassis -Crane chassis: electrically driven, beam width 122 to 172 mm -Chain hoist: Type UX 200UX100 24V2 -Load capacity: 1000 kg (2000 Kg) -Main lift: 4 m/min -Fine stroke: 1 m/min -Chain length: 5.866 m -Dimensions: see photo techn. drawing -Transport dimension: 740/700/H320 mm -Weight: 102 kg

Electric chain hoist, crane, indoor crane, assembly crane, push trolley, push trolley, crane trolley, trolley running gear, crane running gear, crane trolley, trolley -Manufacturer: Unelec, electric chain hoist with powered trolley -Crane chassis: electrically driven, beam width 120 to 190 mm -Chain hoist: Type UX 200UX100 24V2 -Load capacity: 1000 kg (2000 Kg) -Main lift: 4 m/min -Chain length: 6.4 m -Transport dimension: 860/700/H340 mm -Weight: 95 kg

Roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with pull-off conveyor, telescopic conveyor belt, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor -Roller conveyor: completely electrically movable -Telescope: extendable to 10,620 mm -Roll width: 800 mm -Length: 5230-10,620mm -Load capacity: up to 50 kg/m -Working height: 1615 mm -Transport dimension: 5230/1320/H2170 mm -Weight: about 2000 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 5.5 kW -Speed range: 15-108 rpm -Motor: electrically adjustable -Drive shaft: Ø 40 mm -Construction: B3 -Protection class: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Transfer in current condition as seen -Machine must: be overhauled electrically (FI circuit breaker trips) -Grinding points: 4 -Angled tables on vibrating tables: 3 -Vice for chip breaker groove: 1 -Max. Steel cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 1500/1500/H1400 mm -Weight: 1004 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Electric cable winch, cable winch, hoist winch, construction winch -Tension 1 layer: 365 kg -Tensile force 2 layers: 332.5 kg -Tensile force 3 layers: 300 kg -rope speed 1 layer: 10 m/min -Cable speed 2 layers: 11.25 m/min -Cable speed 3 layer: 12.5 m/min -Wire rope: 10 mm -Max. Rope length: 43 m -Power gear motor: 1.4 kW 1395 rpm -Equipment: electrically driven, with limit switch, without control -Dimensions: 900/650/H440 mm -Own weight: 137 kg

Electric cable winch, cable winch, hoist winch, construction winch, electric cable hoist, cable hoist -Tension 1 layer: 2000 kg -rope speed 1 layer: 10 m/min - Wire rope: 10 mm -Cable length: 65 m per layer -electrically powered -without control -Number: 2x winches available -Price per piece -Dimensions: 1850/640/H650 mm -Own weight: 616 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle for: lathe -Electrically operated -Max. Speed: 5000 rpm -Intake: Cone MK4 -Stroke grinding wheel shaft: 430 mm -Diameter of grinding wheel shaft: 100 mm -Dimensions: 600/750/H450 mm -Weight: 120kg

Strip line cutting device, slitting line, longitudinal splitting line, splitting line -Longitudinal slitting line: Longitudinal slitting line from slats/blind production -Cutting width: adjustable via spindle, see photos -Drive motor: North 2.2 kW -Belt feed: electrically driven -Transport dimensions: 1160/840/H1750 mm -Total weight: 688 kg

Sell a star screen that has worked in waste wood processing. Screen cut 100 mm, Electrically driven, extended discharge belts

Mitre Cold Circular Saw BERG & SCHMID Type MKS 350 Year of manufacture approx. 1980 Saw range at 90 Round 110 mm Saw range at 90 Rectangle 160 x 90 mm Saw range at 90 Square 95 x 95 mm Saw range at 45 Round 95 mm Saw range at 45 Rectangle 120 x 90 mm Saw range at 45 Square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchable Mains connection 380 volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45- Material Clamping vice with quick-release eccentric lever - Coolant device with electric coolant pump - Material stop 350 mm- Sawing blade with 335 mm installed - Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition; used

Korimat KA 160 autoclave, 120 litres, 2.5 bar, MC control, autoclave for sterilisation with core temperature measurement, as a pressure pressure cooker for cooking meat, vegetables, soups and ready meals, electrically heated, circular marbled surface.

Cooking and smoking system Kerres JET SMOKE RET-2250 Electrically heated Microprocessor control Integrated wood chip smoke generator in the door Dimensions approx. 168 x 107 x 250 cm Power 29 kW Operating voltage 400 V / 50 Hz

Seydelmann bowl cutter K 60 AC-8, year manufacture 2009, 60 liters bowl cutter, almost completely made of solid stainless steel, operation via knee lever switches, separate digital control COMMAND 1000 K in stainless housing, noise absorbing cover of special polycarbonate, central point of lubrication for knife shaft, balanceable and exchangeable knife head, 6 steplessly pre-programmable forward knife speeds, 2 reverse mixing speeds, 2 separate bowl speeds, separate control box of stainless steel with built-in main-switch, knife shaft brake electrically operated

Used column dissolver. Description: - electrically raised column - inverter-wave - voltage: 380/400V - power of mixing motor: 3hp - 2,2Kw - speed: stepless regulation - dispersing disc diameter: 200mm - total height: 2200mm - shaft length with dispersing disc: 600mm - maximum lift height: 1000mm

This BBA PT150 with strong 7.5 kW electric motor can be used well on large construction projects, where the power supply is often well regulated. Then this PT150 with electric motor is a good choice., Environmentally friendly, not much maintenance, so an investment that pays for itself quickly., This PT150 is electrically powered and built into a robust galvanized stacking frame., , Max. capacity :90 (m3/hour), Max. head :20 (mwc), Max. suction height : 9.6 (meter), , Throughput capacity: 90 m3/h, Max. head: 20 MWK, Max dirt passag: 1485 rpm, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.500 kg, Connector size: 4, Cargo space capacity: 1.500 l, Technical condition: good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, ,  ...

 Plum Plum Pitting Machine Plum Pitting Machine Manufacturer : Gustav Blickle The machine is technically and electrically checked and cleaned. The machine is suitable for plums, smaller plums.See pictureShipping costs please inquire

Four-sided planer copper mill Type: Vuin 605 Planing width 605 mm Planing thickness 3 – 200 mm in the horizontal area Planing thickness at the rear in the vertical area 80 mm Upper and lower planer shafts as 4-knife shafts 4 planer shafts 1. Bottom 5.5 kW 2. Top 7.5 kW 3. Left 4 kW 4. Right 4 kW Shortest piece length, self-continuing: 350 mm Electrically height-adjustable table Width adjustment for the rear planer heads manually via crank 2 feed speeds Suction nozzle diameter 3x120mm, 1x150mm Weight approx. 2700 kg Space requirement L 2350 x W 1400 x H 1800 mm Control cabinet 1200 mm x 420 mm x H 1050 mm

Used autoclave KORIMAT, type: KA 380 -in very good condition- - Kettle volume: approx. 380 L (approx. 500 cans á 300g) - electrically heated, 25 KW - Operating pressure 1 to 2.5 bar - incl. 4 pieces of 1/2 high baskets - incl. lifting bar - Condition: Very good, technically and visually perfect, only 60 applications - Sterilized only cans, no boiling - Delivery time: immediately available - unpacked from stock Technical data: Boiler capacity: 380 litres El. Connection: 3x 230 / 400 V, 50 Hz El. Power: 25.0 kW Operating pressure: 1 - 2.5 bar Ab. Temperature: 2°C - 138°C Inspection and test run possible. Subject to prior sale.

Used electrically heated rack oven WP Rototherm for 58x78cm trays immediately available in stock. -Model: REC 1020 -for 58x78cm trays -with exhaust hood -with digital control -with drive-on ramp -Door hinge on the right -Year of construction: 1999 -Fuel: electric -Electrical data: 48 kW 400V / 230V 50Hz

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Manufacturer: Multivac Model: Thermoforming Packaging Machine R 145 Multivac Thermoforming Packaging Machine Model: R 145 Frame length: 4000 mm Nominal machine width: 320 mm Mains voltage: 400 V Machine voltage internal: 400 V Year of construction: 2010 Bought in 2020, very neat condition. Purchased for product development Performance and Capacity: Number of tracks: 2 Number of rows: 1 Drawing depth: up to 70 mm, adjustable in 5 mm increments Tool spacing: approx. 2475-3050 mm Electrically driven F145 hoists for moulds (4-point suspension) and for seals (2-point suspension), opening width of 150 mm each for top foil holder and bottom foil holder F 22, 3" core diameter Edge strip winder RSW 22 for max. strip width 60 mm per side

We sell here a cooking system from the manufacturer ASCA Consulting in a very good used and functional condition. The system is built in 12/2014, electrically heated, 400 volts, 20 kW, chamber volume 1800 litres, Aditec MKA 110 control, workshop tested, ready for immediate use, dimensions W/D/H 170/140/255 cm, others on request.

Labelling Machine SIDEL Flexible SL90 F85 Cold Glue / Self-Adhesive This SIDEL SL90 labelling machine has three roll feed labelling modules for the application of adhesive (pressure sensitive PSL) labels and three pre-cut cold-glue paper labelling stations both designed for round glass bottles 275 – 660 ml. Operation is anticlockwise. Machine has been operated from 2012 to 2020 when it was dismantled and placed in a warehouse. The labelling machine SL90 operates in continuous mode and automatically adjusts the flow of incoming and outgoing containers. It is also equipped with a camera vision system which is installed in the initial section of the central carousel to detect and identify the containers. It also ensures correct application of the labels on even more complex formats. This system is ideal with containers made of glass, PET and other transparent materials. The con ...

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

Key data: 46 °, 3000 mm, 1000 mm

Swivel sliding table saw WA80TE from Altendorf with 2-axis scoring machine and in good condition Sliding table length 3000mm Saw blade swivel from 0 to 46 degrees Drive motor 5.5kW with automatic motor brake Saw blade diameter up to 400mm Cutting height max. 125mm Cutting width up to 1000mm Swivel angle and height adjustment electrically via buttons Cut-to-length stop ruler up to approx. 3200mm Width stop can be folded down Suction nozzle 80 + 120mm Sliding carriage lockable in any position 1 set of plastic saw blades with matching scoring tool 3 splitting wedges 2-axis scoring unit 2 protective covers 2 emergency stop switches Operating instructions CE Mark Neat machine with usual signs of wear. Minor scratches in the sliding carriage, as well as two repaired small incisions. Original paintwork, only a few spots dabbed V-belt and protective cover renewed. Di ...

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...