electrically used for sale

Dimensions L6000mm, H2000mm, W600mm Powder oven electrically heated 2 powder extraction wall Manual sliding system with transverse carriage incl. steel construction Handheld powderer Wagner Prima Sprint Assembly.

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...

Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide

sheet width: 3000 mm plate thickness: 12 mm pre-bending: 10 mn number of rolls: 4 Walzen diameter of upper rolls: 320 mm roll diam. bottom roll: 250 mm speed: 1,5 - 5 m/min total power requirement: 20,0 kW weight of the machine ca.: 13,05 t dimensions of the machine ca.: 5,9 x 2,05 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

used chain conveyor belt Manufacturer: EuroTec Type : KB 1400 Technical data: Chain type : M 112 Feed length : approx. 6,150 mm Path length : approx. 9,500 mm Belt width : approx. 1,400 mm Conveying width : approx. 1,300 mm Steel body of the conveyor belt : made of St 37 Drive motor with brake : 5.5 kW Switch EMERGENCY STOP : yes Switch START- STOP : yes Lubrication with drip oilers : electric (MURDFELDT) Side tray heights in the feeding area: approx. 500 mm dto. in the climbing section : approx. 1,000 mm Climbing angle : approx. 30°/-20° Gooseneck : yes lower belt cover in the climbing area up to a maximum of approx. 2.50 m intervention height : yes Material outlet chute : yes Conveyor belt supports : yes technical design of the tape: Drive Manufacturer : Getriebebau Nord Type : Bevel gear jack motor Protection class : IP 55 Chain Type : M 112  ...

material width: 3000 mm material thickness: 0 mm no. of straightening rolls: 0 total power requirement: 22 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 7,5 x 2,5 x 2,9 m D U N K E S Hydraulic Straightening System for Flat material and Section Material With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25 Year 1990 ( H 89-1960 ) ____________________________________________________________ Consisting of: Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm, Distance to column 620 mm, sensitive Straightening stroke via handlever with turret-stop, Measuring device for accurate straitening via a lightbar Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd 57/1 ...

cutting diameter: 230 mm capacity 90 degrees: flat: 320 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: flat: 230 x 140 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 190 x 190 mm capacity 60 degrees: flat: 120 x 105 mm capacity 60 degrees: square: 105 x 105 mm capacity 60 degrees: round: 120 mm turning speed range:: 35 - 70 m/min dimensions of saw-band: 2720 x 27 x 0,9 mm height of material-table: 950 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 kg dimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User ma ...

pressure: 300 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 500 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,0 mm/sec work stroke: 320 mm dayligth: 590 mm table height: 905 mm oil volume: 400 ltr. voltage: 400 Volt working pressure: 283 bar Number of working hours: ~ 21.835 h total power requirement: 23,0 kW weight: 18.250 kg Dimensions (HxWxD): 4550 x 2250 x 3050 mm current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) 2D graphic touch screen programming mode 17 high-resolution color TFT Complete Windows application suite Delem Modusys compatibility (module  ...

Shared oven WP Matador Store 6.4 A used electrically heated shared oven WP Matador Store 6.4 for bakery and confectionery is currently for sale and immediately available in our warehouse in Bielefeld. The stove is equipped with base and exhaust hood. Floor oven W&P Matador Store 6.4 - 4 floors each 60x40cm -per floor one sheet 60x40cm -1 x Hood 8 x ADK with RBA 0.1 kW 230 Volt - 1x base 6.4 600 - with exhaust air hood including vapour condenser -electrical data per floor: 3.6kW; 3-400V; 1.45 kW - Year of construction External dimensions approx. Width : 93cm Depth 100cm Height: 210cm incl. hood Floor entrance height 14cm Oven is functionally tested and cleaned -Oven can be inspected and tested in our warehouse

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

table length: 1150 mm table width: 1150 mm table load: 2 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: JWelding Type: HB-20 Capacity: 2.000 kg Plateau dimensions: 1.150 mm ø Working height platform, horizontal: 1.180 mm Working height platform, vertical: 1.000 mm Rotation diameter vertical: 1.550 mm ø T-slots: 8 Electrically tiltable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3220 mm plate thickness: 2,0 mm daylight opening: 160 mm adjustment: 80,0 mm bending angle max.: 120 ° total power requirement: 4,0 kW weight: 3.965 kg range L-W-H: 4575 x 2450 x 1550 mm Furnishing: - Motorized universal folding machine for single and series production - rotating upper beam / as an automatic tool changing system Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 with touch screen control panel Color display USB interface automatic cutting calculation Materials and tools library precise bending simulation - Servo converter controlled drives for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : Station 1: 1x pointed rail Station 2: 1x split goat foot tool - Free-moving double  ...

sheet width: 2000 mm plate thickness: 8,0 mm max. plate thickness: 8,0 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with ModulMW ...

sheet width: 2000 mm plate thickness: 8,00 mm max. plate thickness: 8,00 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with Modul ...

bore capacity in steel (diameter): 18,0 mm throat: 190 mm bore stroke: 80 mm morse taper: 2 Kurzspindel MK turning speeds: 225 - 4.300 U/min voltage: 400 / 50 Hz Volt table:: 300 x 240 mm column diameter: 65 mm engine output: 0,37 / 0,55 kW weight: 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm Item no .: 09. 434, - Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

all stainless steel electrically heated 386 kW frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

working width: 530 mm; working height: 250 mm; cutter head: strip knife; number of blades: 4; height adjustment: electrically; read out workpiece thickness: digital; feed speed: 2 speeds; infeed roller: steel; outfeed roller: steel; table roller: no; motor power: 5,5 kW; suction connection: 140mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 900kg;

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

Manufacturer: Riedhammer Model: DRA 6/40 temp.: 1150°C electrically heated. Installed connected load: approx. 145 kW 6 control areas Plant is as good as new. Almost no operating hours. At call.

The machine was completely overhauled by the manufacturer in 2006 and then only sporadically used to rework individual pieces. Machine has magnetic clamp which is mounted on electrically driven rotary table. Furthermore, a dressing device for the pot grinding wheel is available. Machine is in top condition.

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

: 30 to stroke: 400 mm column daylight: 740 mm : 300 mm total power requirement: 2,2 kW weight of the machine ca.: 600 kg dimensions: 1200x800x2100 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mettler Toledo PAS 3012 check-weigher with labeling machine., The labeling had can be electrically moved in all directions for an accurate positioning of the labels., - Max. weight: 6KG, - Min. weight: 0.020KG, - E: 0,001KG, - Rated for 70 packs per minute

As good as new Bastra boiler system from 2013. 200 and 300 liter boiler with insulated lid and modern digital control. Electrically heated 13.5 and 18 KW

Measuring and marking plate cast steel strongly ribbed STIEFELMAYER from a measuring or marking machine with hand-held measuring arm Masch. No. 8530979 Year of construction approx. 1989 Length 3000 mm Width 1500 mm Thickness 360 mm Working height 690 mm Plate thickness 70 mm continuously - laterally machined at a 90 angle surface 3000 x 360 mm - 6 pieces height-adjustable feet - plus 1 piece measuring arm mechanically and electrically without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm Space requirement L x W x H 3000 x 2000 x 2500 mm Weight approx. 5000 kg very good surface; used

Used Autoclave ASCA -Refurbished- - 125 litre boiler, electrically heated -outdated - with baskets - Can be shipped within one week - Condition: Very good, ready for immediate use - 6 months warranty

sheet width: 2050 mm plate thickness: 3,0 mm max. roll length: 2050 mm roll diam. toproll: 130 mm bending speed: 3,0 m/min total power requirement: 2,2 kW weight: 1530 kg range L-W-H: 3220 x 1200 x 900 mm very good condition () current new price ~ 17.000 euros Furnishing: - Electrically driven top and bottom rollers - swing-out top roller, with folding bearing - asymmetrical roller arrangement - manual delivery of the bottom roller, by hand wheel - self-braking main motor - Profile inlets in the rollers - Safety line - free-moving footswitch Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for rear roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: -- kN heating plates:: 600x600,500x500 mm electrically heated:: -- °C piston stroke:: -- mm no. of stages:: 1-3 Condition: Used, Specification: 5x vulcanising press, second-hand consisting of: 2x make Simpelkamp, 2x make Reinartz, two-daylight presses 1x make Reinartz 1x crane system 1x pedestals Simpelkamp presses: - Clamping force: 250 t - number of floors: 1 - Closing: from bottom to top - Heating plates: 2 electric plates - Dimensions of heating platens: 600 x 600 mm - Distance between heating platens: 530 mm - Hydraulics: 200 bar - AC machine power oil pump: 7,5 kW - Dimensions approx.: 1,300 x 1,000 mm - Unit height approx.: 2,800 - 3,000 mm Two similar plants are available Reinartz presses: - Clamping force: 140 t - Number of floors: 3 - Clo ...

The compact JELLY is suitable for use on a table or on a mobile base, depending on your needs. Almost any type of gel can be used to work with this device. Operation is very simple and the gun trigger is operated without force. Technical data: Design: stainless steel working parts and body, Power supply: electric 220/240V, 1500 W, Control: manual, Operation type: spraying (gun - spray), Capacity: constant - at gel temp. of approx. 90 degrees C, 400cm3/min, Dimensions: 377 x 510 x 430 mm (length x width x height), Accessories: electrically heated flexible hose, length 1.8m; dispensing gun and gun handle.

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1550 kg range L-W-H: 3220 x 1200 x 900 mm Exhibition machine - unused (!) Special price on request List manufacturer price: 21.400 euros Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds The data for this ad was created with ModulMWS - the software sol ...

GEA CFS FlowCook HLT6000/600  Electrically heated. Hot air and steam. Belt width: 600 mm; Cooking length: 6000 mm Has previously been used for cooking burgers and nuggets in one factory and then on rental to a customer who was roasting trays of nuts. 

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Crate washer Manufacturer Kitzinger for E 1 E 2 and E 3 boxes Electrically heated With pre-wash and rinse zone

DESCRIPTION Beck Packers Series Packer S1750 X Fully automatic film packaging machine for four-sided product shrink-wrapping Fully automatic, belt feeding with light barrier control Functioning: The beck series packer works fully automatically with photoelectric product scanning. The goods to be packed are introduced by means of a conveyor belt into the cross weld seam and Shrink-wrapped there in cycles on 4 sides. The film rolls are mounted above and below the conveyor belt. For the production of skin-tight shrink packs, the packaging machine can be equipped with the proven energy saving beck thermal shrink can be extended to a complete film packaging line. Specifications: Standard operating page: right Welding punch width: 550 mm Punch closure: servo-motor Welding system: permanently heated Passage height: 100 mm Belt width inlet: 140mm Belt width spout: 1 ...

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Pallet shrink machine with shrink hoods that descends and completely covers the pallet during the shrinking process. Energy sources: natural gas or liquefied petroleum gas and electrically powered. Function: Driven curtain to close the shrink bell opening Pallet base plate with integrated breather and ramp for Loading by means of a hand pallet truck Catalytic heaters ( No free flame ) Maximum power 13 Kw/hour Max pallet dimensions (standard version) length 1,200; Width 1.200 Height 1,500 mm Number of cycles up to 25 pallets/hour Automatic shrinking process with adjustable shrinkage time Preheating time approx. 30 minutes Operating temperature approx. 200°C - 220°C depending on film thickness

Carriage length: 3200 mm; Cutting width at width stop: 1270 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 136.5mm; Vorritzer: Yes; Saw blade swivel range: +45Â; Height adjustment of saw blade: electric; Swivel adjustment saw blade: electric; Adjustment of width stop: manual; Display saw blade angle: digital display; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Scoring gear adjustment: manual; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power: 7kW; Suction connection: 80 and 120mm; Machine length: 3500mm; Machine width: 2200mm; Weight: 715 kg; TECHNICAL DATA Dimensions and Weights Weight (net) approx. 715kg connection Suction Suction nozzle diameter120mm Extraction nozzle diameter saw blade protection80mm Installation information transport width990mm Machine body length1900mm machine body Width/ ...

continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Used 350 LTR 304SS electrically heated process mixing tank. Equipped with frame agitator and controls. 400V power installed. Condition Excellent. Manufacturer: MARGO Year of manufacturing: 2017.

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

turning diameter over bed: 1000 mm turning diameter over slide rest: 710 mm turning length: 7000 mm max. workpiece weight between centres: 10000 kg spindle turning speed range: 1,8-400 U/min tailstock quill taper metric: 80/1:10 tailstock - quill dia: 170 mm tailstock - travel of quill: 200 mm Tailstock quill travel speed: 2150 mm/min main drive motor: 37 kW longitudinal feeds:: 0,125-48 mm/U face feeds: 0,4 der Längsvorschübe weight of the machine ca.: 17 t dimensions of the machine ca.: 11x1,9x2 m machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.