electrically used for sale

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electrically heated PROBAT in-store roaster, little used. Ready to use right out of the box.

CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

Key data: 700 bar, 3 kW

Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.

The trimming saw or panel saw Altendorf type F45 is a circular saw with a sliding panel for sawing wood and similar materials with an electrically adjustable and pivoting saw blade with digital display., cutting height: 200 mm, cutting length: 3.000 mm, cutting width: 1.000 mm, saw blade ø: 550 mm, engine: 5,5 kW

BLISTER LINE ROMACO NOACK (BLISTERING MACHINE + CARTONING MACHINE) Year of construction: 1998 Blister packing line consisting the following two machines, both electrically upgraded in 2020 with new PLC and HMI. Noack 920 blister packer: Maximum draw depth: 12 mm Maximum foil width: 160 mm Maximum capacity: 80 forming strokes per minute Blister collation system for feeding into the cartoner Automatic tablet track in-feed system Tablet feeders into brush box Suitable for packaging tablets or capsules into Alu/Alu or PVC/Alu blisters Variable speed Laetus vision system Vacuum system HAPA H-226-C printer Romaco Promatic P150 fully automatic horizontal intermittent cartoning machine: High production speed, format change without tools Carton dimensions: minimum: 20mm x 15mm x 60mm; maximum: 100mm x 85mm x 150mm Minimum carton dimensions: 20mm x 15mm x 60mm Ma ...

Used capping machine AROL 4T up to 6500 bph Introduction to AROL 4T s Versatility In the bottling industry choosing an efficient capping machine is crucial Indeed the used AROL 4T capping machine represents an optimal solution Companies seek high performance without compromising precision Moreover safety is a key concern Four Head Capping Mechanism Equipped with four heads this machine is designed for both flat and mushroom cork caps It offers indispensable versatility Flexibility and adaptability are demanded in today s market Consequently the head height adjusts electrically for quick adaptation This is crucial to minimize downtime and therefore maximize efficiency Durable and Hygienic Design The base made entirely of stainless steel ensures longevity and resistance to corrosion Additionally it facilitates cleaning and maintenance Thus maintaining hygienic standards in the food and bev ...

Screw conveyor for various materials in very high-quality design with replaceable wear parts, electrically driven, feed length approx. 7 m, feed width approx. 1 m, discharge in the middle, hardly run, very good condition, for example suitable for filling a conveyor belt with the wheel loader, etc.

General SKU354T965 LocationBarneveld MakeUS Roaster Corp. TypeCoffee roaster No.1217 Year of constructionunknown Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) Motor0.55kW, 230/500 Volt Information Total height1,9 m Weight910 kg Floor space2x2 m Extra SpecificationsThis coffee bean roaster is electrically heated. Six heat spirals are mounted under the drum, with the hot air rising and being exhausted by a fan through the mixing chamber and blown off to a cyclone. The coffee roaster can be filled through the hopper. When ready, the beans can be unloaded by manually opening a valve. The beans enter the cooling vessel with grid. The built-in blower blows cool air through the beans. The vessel is fitted with an agitator to cool the beans evenly Product chamber size: Dia:450 x510 mm Feed hopper: 400m ...

Wagner WDC 660x2000 lathe with Siemens 828 Shopturn CDC control: - 3 range changes - automatic gearbox - constant cutting speed - bench guides induction hardened, ground and covered with turcite - Hardened and ground precision ball screws - electrically ensured self-centering protection - manual tailstock, MK6 sleeve - centralized automatic lubrication of the guides - RS232 interface - complete refrigeration system - machine lamp - integral fairing with 2 sliding doors and safety glass window - 1 set of machine leveling pads - service tool - 8-position hydraulic revolver 25x25 - Fixed steady rest with rollers from 50 to 225mm - Self-centering with tangential control ra - Transport of shavings with wagon Complete with user manuals and control instructions Year of production: 2017 Working hours: 650 Technical detials: Maximum rotating diameter above the bed 660 mm  ...

Overview The PET bottling line mainly contains machines from Krones and Meypack and was installed in 2011 in a German mineral water company. It was operated in the same location with a returnable PET bottling line and the two lines were sharing the same filler. Therefore the number of operating hours on the machines of this line are very low, as mainly returnable PET bottles were produced. The filler will we kept inside the returnable PET bottling line, therefore the line is sold without a filler. As the sales volume of non-returnable PET has reduced further, the line is stopped and for sale. All machines are still assembled and electrically connected.   Tech Specs: Capacity 20,000 bph, at 1l Suitable for carbonated and non carbonated beverages Neck type: 28 mm The Plant in Detail: Manufacturer: ---- Machine Type: PET Bottle Fedding Manufacturer: Lanfranchi Machine Type: PET Bottle Unsc ...

Blow Molding BM 5000D full electric (2005) Machine mass: 22.800 kg Year of mnufacture: 2005 Ed.05 Max width: 4780 mm Max width with open barriers: 6820 mm Control cabinet height: 1400 mm Back width: 2270 mm Max height: 3800 mm Max length: 5770 mm Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Air pressure: 6-10 bar Total installed power: 44 Kw Cooling water pressure: 2,5kg/cm2 Working prssure level in the working environment: 88,3 dB(A) Total weight without extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power: 53 Kw -Rotation speed: 80 rpm -Heating power+maximum head: 24 Kw The machine is out of use but removed from production for 2 years , and can be connected electrically for inspection.

Description: - Operating voltage: 3 X 380 V - Frequency: 50 HZ - Rated current: 21 A - Sheet passage: approx. 2000 m - with electrically adjustable stop - Pressing force: Presumably 100 tonnes - Attention: The press brake tools on the machine are not included in the scope of delivery. However, the accessories on the pallet are included in the scope of sale. serial number: 591 06 3165, bending length: 3,100 mm, control: Swissax Euro III, weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 2,500 mm

Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.

Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...

We sell here a tilting frying pan from the manufacturer MKN, type FlexiChef FCEKMP332DR-0002 in a very good used and functional condition. The appliance runs on 400 volts, 26.1 kW, year of manufacture 2014, volume 170 litres, net capacity 150 litres, electrically tiltable, programmable, digital control, with rinsing spray, pressure version, for cooking, frying, soft cooking, pressure cooking, regenerating, workshop tested, ready for immediate use, dimensions W/D/H 175/85/70 cm, others on request.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation

Hydraulic guillotine for cutting sheet metal by ESPE Strojarne Piesok, type CNTA, 3150 mm x 6.3 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 1 -2.5 degrees, set from the desktop. 11 kW motor. Machine weight 7 tons. Bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3150 mm. 2 supports to hold sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Light line enabling line cutting. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Hydraulic press brake: HACO type PPB 30-135 Bending length: 3100 mm; Between columns: 2650 mm Loading: 200 mm, stroke 150 mm; Pressure: 135 t The press is manually controlled, the angle and bumper are set electrically from the operator panel. Machine weight 9 tons. Drives 9 kW. Tools - set - multi-groove matrix 120x120 mm + punch. A very simple and powerful machine that can work in unheated rooms. Full Operation and Maintenance Manual, BiHP position manual in Polish.

Hydraulic guillotine for sheet metal cutting by Beyeler Switzerland type VR 10-3070, 3070 mm x 10 mm (ST40). Cybelec DNC10 PS fully CNC controlled machine. The machine has a variable gap between the knives and a hydraulically variable knife angle of 1 - 2.5 degrees, set after entering the thickness and hardness of the material. 18kW motor. Machine weight 9 t. Super-fast bumpers - 1050 mm bumper departure. Electrically adjustable cutting length in the range of 10-3070 mm. 2 supports to support sheet metal at the front of the machine, plus a 90 degree cutting gauge. Light line for line cutting. Original DTR documentation and health and safety instructions in Polish. Infrared protection of the rear working area. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine for cutting sheet metal from Darley the Netherlands, type GS 3000-10, 3050 mm x 10 mm (ST40). The machine has a variable knife gap and a constant knife angle of 1.5 degrees. 18 kW engine. Machine weight 9 tons. Electric bumper - bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3050 mm. A machine with very small external dimensions. A support for holding sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.

sheet width: 2540 mm plate thickness: 3,0 mm distance between columns: 2500 mm back stop - adjustable: 1000 mm upper clamping bar adjustment: 350 mm total power requirement: 4,62 kW dimensions: 3800 x 2300 x 1750 mm weight of the machine ca.: 3050 kg - lateral protective wall - 1x dual free-moving footswitch - 1x free moving footswitch - Electrically controlled back gauge with rear sheet metal support surface - with ball rollers - incl. new hydraulic pump (value approx. 4000€) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5013 Type: DLE 650/220/3000 G Producer: Mahler Created: 2007 Parameters: Belt width: 650 mm Free height above belt: 220 mm Gross continuous power including belt: 500 kg-hod Belt conveyor control range: 50-500 mm Upper limit temperature: 1120 C Operating temperature: 800-1120 C Electric heating capacity: 125 kW Total current: 130 kW Effective length of the furnace (heated): 3000 mm Furnace length: 19500 mm Furnace width: 2000 mm Furnace height: 2600 mm Weight: 12 t Equipment: Technical Documentation The stove is electrically heated.

Overview The BP 1800 briquette press was manufactured in 2004 by the German company Strautmann. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The briquette press is still assembled and electrically connected. Technical data   Filling opening: 950 x 1300 mm Size: 5595 x 1570 x 2000 mm  Installation area: approx. 5.8 m² without ejection chute Briquetting of  Cardboard  Paper  Styrofoam PET bottles Briquette dimensions: 200 x 200 x 100-300 mm  Briquette weight: approx. 200 to 450 kg/ m³, depending on material  Accessories Conveyor belt Distribution chute

Overview The handle applicator was manufactured in 2002 by the Italian company Twin Pack. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The handle applicator is still mounted and electrically connected. 

Overview The CE6SG40 compressor was manufactured by the Belgian company Ateliers François S.A. in 2002. It is located at a German mineral water bottling plant and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The compressor is still mounted and electrically connected. Technical data Free air delivery: 1700 m³/h   Operating pressure: 40 bar Speed rpm: 410

REX U 41K four-sided planer - German production - DTR - numerical control - year of production 1997 - milling heads - for wet wood - total power 51.5 kW TECHNICAL PARAMETERS: - planing width 410 mm - planing height on 2nd and 4th side 260 mm - electronic adjustment of planing height and width with the possibility of programming fixed dimensions 1 lower shaft 7.5 kW 2 upper shaft 11 kW 3 right spindle 7.5 kW 4 left spindle 11 kW milling units 2 x 1.85 kW - feed smoothly adjustable electrically - feed speed range 5-30 m/min - 3 kW feed motor - five pull rollers in the tabletop - two auxiliary rollers in the tabletop - five upper pulling rollers - four pressure rollers on vertical spindles - pneumatic side pressure of the material - adjustable heads - adjustable lower shaft - minimum material length 400 mm Transport dimensions 420 x 230 x 230 cm weight ~ 5  ...

Overview  The winder was manufactured in 2002 by the swiss company Strapex. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The storage depalletizer is still mounted and electrically connected. Technical Data Power: 5,4 kW  Air consumption: 100 l/ min  Max. Air pressure: 6 bar  Weight: 1500 kg  Accessories Pallet transport Protective fence Logopak labeler Empty pallet magazine

Overview The crate washer was manufactured in 2004 by the German company BOOS. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The handle applicator is still mounted and electrically connected.  It has a capacity of at least 1.500 crates/ hour.

Description: SPECIFICATIONS Feature: Erfurt Type: PR160/315 Capacity: 160 T Table length: 800 mm Table width: 550 mm Air coupling: Yes 2-Hand protection: Yes Unloading: 300 mm Number of slugs: 50 p/min Electrically adjustable slug: 100 mm weight approx.: 14,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 3,200 x 3,100 mm

Description: SPECIFICATIONS Character: Goyar Type: IE-40/25 Machine weight: 38,500 kg Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 50 mm Number of rolls: 3 Upper roller diameter: ø530 mm Bending capacity: 40 mm Rolling speed: 4 m/min Electrically driven: Yes Power of main motor: 70 kW weight approx.: 38,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 7,000 x 3,100 mm

The trimming saw or panel saw Altendorf type F45 is a circular saw with a sliding panel for sawing wood and similar materials with an electrically adjustable and swiveling saw blade, digital display and scorer. In addition, the machine has pneumatic hold-down devices for convenient one-person operation., cutting height: tba, cutting length: 3.200 mm, cutting width: 1.300 mm, saw blade ø: 450 mm, engine: 5,5 kW, Vorritzer: 0,75 kW

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](https://www.germanplast.eu/listings/5003567-germanplast-vibrat ing-screen-round-type) (available separately), This machine is to be electrically conne ...

Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72  ...

Required air-pressure: 7 bar weight: 3 kg dimensions of the machine ca.: 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2 BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Tempera ...

Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

Electrically operated piston pump,, semi-automatic,, a filling station,, was in use for salad dressing,, Filling volume: up to max. 200 ml per stroke,, moveable on rollers., power: up to approx. 400 bottles/hour, Dimensions / weight: L x W x H: 2,000 x 600 x 1,800 mm

Mikrosa SASL 3/1 workshop overhauled. Condition very good, ready for immediate use. Equipped with loading device for plunge grinding, through-loop grinding optionally possible. The machine has been mechanically and electrically repaired and functionally tested. Specifications Max. workpiece size for grinding wheel Ø 500mm 3.5 - 140 mm Max. workpiece size for grinding wheel Ø 600mm 3.5 – 80 mm Workpiece length max. (plunge grinding) 245 mm Grinding wheel Ø - External 630 mm - Inside 380 mm Grinding wheel width 250 mm Control disc Ø - External 315 mm - Inside 230 mm Control disc width 250 mm Grinding wheels speed 35/45 m/s Control disc speed (infinitely adjustable) 10-480 min¹ Drive power 32 kW Machine weight approx. 4.8 t Control cabinet weight approx. 400 kg The machine can be viewed by arrangement in our factory in Krefeld.

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...

Used autoclave ASCA 215 liters -refurbished- - 215 litre boiler - electrically heated - Completely overhauled - incl. 2 baskets - incl. pressure test and certificates as well as certificates will be handed out - Condition: Very good, ready for immediate use - 6 months warranty - Delivery time: 1 week after order order Due to the high working pressure and temperatures, we are subject to the Pressure Equipment Ordinance. As a result, our devices are always overhauled and approved by experts. The device is in pristine condition and ready for immediate use. Viewing and test run are possible by arrangement.

Ergonomics desk approx. 160x80 cm, table top concrete look grey, electrically height-adjustable

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

Key data: 700 mm, 3 mm

– Capacity 700 x 3.5 mm – Electrically adjustable rear roller –Digital readouts – Hardened rollers – Conical rolling – Swivelling top roller – Brake motor – Foot control - Emergency stop –Documentation – 400V

Article number: 07-07-235 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1988 L x W x H: approx. 2300x1800x1800mm Weight: approx. 1750kg Digital display: 3 – axes – ACTIVE – digital display Heidenhain (TNC 113) Travel: X-axis: approx. 500mm Y-axis: approx. 400mm Z-axis: approx. 400mm Table clamping surface: approx. 700x400mm Spindle: Speed range: approx. 50-2500 rpm Tool holder: ISO 40 Drive power: approx. 6.0kW Tool clamping: automatic Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-630mm/min Rapid traverses: approx. 3.0m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal – Spindle Cover Cap  Safety handwheels  Central lubricatio ...

Article number: 07-07-085 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Safety handwheels  Horizontal spindle cover cap  3-axis digital display SINO New  Machine feet  Tilting swivel table  electrically moni ...

Caljan telescopic belt conveyor LJ-6-19-800 RA2284 Base part with 3 electrically extendable and retractable telescopic elements. The telescope can be extended continuously up to 19000 mm at the touch of a button. Year of manufacture: 1995 Condition: Good overall condition Rated voltage: 3 x 400 VAC + PE Frequency: 50 Hz Fuse: 16 A Length base: 6000 mm Width base: 1000/1470 mm Base transfer height: 1000 mm Height base take-off: 810-1000 mm, adjustable at the touch of a button Length of telescopic section: 13000 mm Total length: up to 19000 mm Belt width (GB): 800 mm Load/m: 50 kg With purchase of 2 pieces 7.650,00€/piece Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1995 condition: gut Conveying length in mm: 6000+13000 Nominal / outside width in mm: 1000 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zent ...

Key data: 1500 kN

Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...