137,076 used machines on RESALE, but how to find them? Machine Search
Never used / sold in original carton Auction-ID: A1-51538-340
Never used / sold in original carton Auction-ID: A1-51538-350
Lot of 25 HDMI cables – 1.5 m – New Lot consisting of 25 HDMI cables, each 1.5 metres long. Important information – to be read before bidding Goods from end-of-series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. Electrical items not tested: their operation has not been checked. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-379
Never used / sold in original carton Auction-ID: A1-51538-346
Never used / sold in original carton Auction-ID: A1-51538-361
Allimex cable clamp Allin 2x box with 500 pieces Total 1000 pieces Auction-ID: A1-50174-88
Compatible with Dyness B4850, B3, Pylontech US2000/US3000/US5000, BYD, Goodwe, 48V lithium battery systems, hybrid inverters. Main features : Length: 200mm (20 cm) Diameter: 25 mm² Capacity: up to 120A 2 cables: 1 positive (red) + 1 negative (black) Connectors: quick lock + M8 cable lugs Highly conductive tinned copper Auction-ID: A1-50174-56
Never used / sold in original carton Auction-ID: A1-51538-362
Never used / sold in original carton Auction-ID: A1-51538-353
Never used / sold in original carton Auction-ID: A1-51538-360
25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-50174-58
Never used / sold in original carton Auction-ID: A1-51538-355
Never used / sold in original carton Auction-ID: A1-51538-358
25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-50174-49
Compatible with Dyness B4850, B3, Pylontech US2000/US3000/US5000, BYD, Goodwe, 48V lithium battery systems, hybrid inverters. Main features : Length: 200mm (20 cm) Diameter: 25 mm² Capacity: up to 120A 2 cables: 1 positive (red) + 1 negative (black) Connectors: quick lock + M8 cable lugs Highly conductive tinned copper Auction-ID: A1-50174-57
Allimex cable clamp Allin 4x box with 500 pieces Total 2000 pieces Auction-ID: A1-50174-89
25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-50174-44
Part No.: 07.03.683 Cable length: 2000 mm Cable cross-section: 4 mm² Cable diameter: 5.7 mm Max. voltage: IEC 1500V Halogen-free, low smoke Connectors: male and female Lot No.: QC230408-A002 100 pieces per box Box weight: 15,835 kg Auction-ID: A1-50174-829
Unused; in the original packaging; with mounting bracket; 20m+2m cable; rolled up to 1000W; fully rolled out 2500W; Auction-ID: A1-51257-421
Unused; in the original packaging; with mounting bracket; 20m+2m cable; rolled up to 1000W; fully rolled out 2500W; Auction-ID: A1-51257-420
Including 3 shelves. Dimensions per section: 100x64x200 cm. This lot must be collected by the buyer himself. Auction-ID: A1-51062-395
Auction-ID: A7-51635-16
Auction-ID: A1-51267-3007
Includes 2 sections Meta shelving unit. This lot must be dismantled by the buyer himself. Auction-ID: A1-51062-269
Copper cable recycling line – WT 300 shredder + PK 100 granulator/separator, 180-210 kg/h (NEW, built to order) POL-SERVICE Majcher – manufacturer and supplier of plastic processing machines with over 30 years of experience. We offer a complete copper cable recycling line consisting of: – WT 300 – twin-shaft pre-shredder – PK 100 – cable granulator with copper/plastic separator The line is supplied as a brand-new system, built to order, with configuration tailored to the Customer’s requirements (e.g. conveyor between machines, magnetic separator, dedusting). This setup allows efficient processing of cable bundles: first pre-shredding in WT 300, then granulation and copper/plastic separation in PK 100. It is an ideal solution for scrap yards, metal recycling companies, electrical contractors, recycling plants and production facilities that want to recover c ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03
Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg
Electrical-Electronic Parts - Heidelberg Maschinen List under PICTURES
SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...
Machining tank inner dimensions (W x D) 1040×780 mm X,Y,Z Strokes 600,400,270 mm U x V axis stroke 80×80 mm Max. taper angle ± 15° (Thickness: 120 mm)
Elektromodul SCHULZ SYSTEMTECHNIK VC210/5 230 V suitable components: EL407, S482, EL873, EL872, EL875, EL876, EL877 used ! Dimensions: 480 x 420 x 130 mm
Max. workpiece dimensions (W x D x H) 1050 x 820 x 305 mm Max. workpiece weight 1500 kg Table dimensions (W x D) 860x640 mm Machine travels (X x Y x Z) 600 x 400 x 310 mm Machine travels (U x V) ±75 x ±75 mm
Offer 25223 Technical data: ( non-binding ) - Test panel for wall mounting with various test equipment - Space requirements W 600 x H 850 x D 300 mm - Weight 40 kg
A total of explosion-proof 6 low-lift and high-lift trucks as well as 6 manual pallet trucks from the manufacturers Jungheinrich, Still, and Hawker are available.
OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse
This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.
This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.
This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.
This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.
maximum number of results exceeded
please refine your search
10 € 
