electrical cable used for sale

Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables

McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

Cable length meter, -robust machine version, measuring wheel circumference 500, -with mech. Counter for 9999.99 m. measuring accuracy of 0.4%. -Number height 7. -Cable diameter 20-120mm Nudlmuhk With the electronic pre-selection counter as an accessory, the desired cable length can be preselected and the winding machine can be switched off. This machine does not have an official calibration.

Diameter cable: approx.18 to max. 180 mm Separation speed: approx. 32 m/min Drive control: approx. 11 kW Dimensions: approx. 1880 x 1400 x 1560 mm Weight: approx. 1,900 kg Knife adjustment: hydraulic Height adjustment: hydraulic Condition: used, operational

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical

Steel cables Wire ropes Slings made of steel Length: 20 m Diameter: 10 mm 1 end open / 1 end with safety eye hook Load capacity: unknown 2 pieces available

Steel cables Wire ropes Slings made of steel Length: 10 m Diameter: 25 mm Hoses right/left Load capacity: 5 to. 10 pieces available

Earth cable for inert gas device, electrode device -Length: 2-3 m -Dinse connector -Number: several cables available -Price: per piece

Earth cable for inert gas device, electrode device -Length: 2-3 m -Dinse connector -Number: several cables available -Price: per piece

Socket line, plug -Type: KMF-1-24-2,5-LED -Number: 6x available -Price: per piece -Minimum purchase: complete -Weight: 0.17 kg/piece

Power cord -VDE 0276 type: NYY-J 1x16 RE 1 kV -Length: approx. 500 m -Dimensions roll: Ø 600/420 mm -Weight: 122 kg

Power cable, solar cable -VDE 0276 type: NYY-J 1x6 RE 0.6/1 kV -Dimensions roll: Ø 500/425 mm -Weight: 15 kg

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -Steel rope with: loops -Length: 4 m -Rope diameter: 12 mm -Price: per piece -Number: 1 pieces -Weight: 2.15 kg/piece

Cable shears -Cable shears: hydraulic -without: hydraulic unit -Max. Opening: 95 mm -Number: 1x cable shears available -Dimensions: 530/180/H80 mm -Weight: 13.3 kg

Earth cable for inert gas device, electrode device -Length: 8 m -Dinse connector -With: gas hose -Weight: 24 kg

Earth cable for inert gas device, electrode device -Length: 5 m -Dinse connector -With: gas hose -Weight: 11 kg

Earth cable for inert gas device, electrode device -Length: 2 m -Dinse connector -With: gas hose -Weight: 5 kg

Earth cable for inert gas device, electrode device -Length: 30 m -Dinse connector -With: gas hose -Weight: 68 kg

Earth cable for inert gas device, electrode device -Length: 13 m -Dinse connector -With: gas hose -Weight: 28 kg

Earth cable for inert gas device, electrode device -Length: 33 m -Dinse connector -With: gas hose -Weight: 72 kg

Earth cable for inert gas device, electrode device -Length: 27 m -Dinse connector -With: gas hose -Weight: 64 kg

15m display 22.5 tons

recoem GDS-460 Challanger with air filter tower and turbo mill Year of construction : 2021 Condition : New Power : 22,5 kW motor Total power : approx. 48kW Throughput : 400kg/h Accessories : 2,3,4,5,6 hole sieve Dimensions : LxWxH 3000x1500x2200 mm Total weight : 3600 kg Rotor dimensions : L x diameter. 460x400 mm A compact recycling plant Model Challenger GDS 460. Single shaft cable breaker with 15 rotating 2 fixed knives. The design and precision of the cutting chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, simply contact us.

The cable pelletizer system comes from the Turkish machine manufacturer GEM and has a processing capacity of up to 1,000 kg of old cable / hour. The machine has the following components: 1.Conveyor belt to shredder: 2.2 KWA motor power / 5.5m long 2. Shredder: CE certificate: TS 1000 / pressure 100 bar / 75 kWA /145HP engine power / capacity: 800 – 1200 KG / hour 3. Conveyor belt from the shredder: 2.2 kWA motor power / length 6 m 4. Spiral bunker and spiral conveyor: 3.0 kWA motor power / length 3.5 m 5. Hopper to granulator: 3.0 kWA motor power / length 5.2 m 6. Granulator: CE certificate: TR 1000 - 5 / 110 kWA motor power / capacity: 800 – 1200 KG / hour 7. Screw fan: 11 kWA motor power / number of revolutions: 3000/minute 8. Helix Silo: 1.5 kWA motor power 9. Separator plastic of copper: 0.55 x 2 kWA motor power 10. Magnet separator: 0.55 kWA motor power 11. Filter s ...

4 chain pulleys make YALE type VSMB 5Year of construction 1998Capacity: 5 tLifting height: 3 mLoad chain size: 30 x 10 mmNumber of chain strands: 2With- Trolley 5 t, flange width 98-180 / 180-300 mmxa0xa0 with manual feed chainvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 N-FMasch. -No: 4122555 with fine strokeCapacity 1str.: 1000 kgCapacity 2str.: 2000 kgLifting height: 3 mSpeed 1str.: 8/2 m / mmSpeed 2str.: 4/1 m / mmWith- in 1str. execution- Chain basket:used, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double-ended electric chain hoist make STAHL type R 12Fabr. -No: 3418474 year of construction 1969Last strands: 2Payload: 1250 kgMain lifting speed: 8 m / minPower 380 V: 1.22 kWWeight approx. 45 kgWith- chain memory- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric winch make PFAFF type BetaMasch. -No: 5/96741800042 Year 1998 Art. -No: FU11402074Capacity 1st positionRope diameter: 8.0 mmRope length: 86.3 mRope speed min.: 1,8 m / min.Rope speed max: 18.2 m / min.Breaking force: 40.5 knTensile load 1. Position: 500 kgTensile load upper layer: 420 kgDrive power: 0.94 kWWeight approx.:80 kgWith- Control cabinet- built on palletused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make EUROLIFTYear of construction 2000Capacity: 1000 kgNumber of chain bar: 2Lifting height: 3000 mmWith- control cable- chain memory- flat design- CE marklittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spur chain pulley make PFAFF type EcolineArt. -No: 0867005 Test. -No: 03727 Year 1999Lifting load: 2.0 tChain strand: 1Lifting height: 3.0 mHand chain pulling force at full load: 38 kgWeight approx: 26 kgOutside dimensions approx: 185 x 233 x 400 mmWith- short height of construction- Load pressure brakeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 NMachine -No: 730966, built in 1970Capacity: 500 kgLifting height: 3 mSpeed: 10 m / min.With- 1-levelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5697825Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5546885Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make STAHL type R 6/600Masch. -No: 3544260 Year 1971Load capacity: 600 kgLifting height: 3.0 mPower: 0.44 kWWith- fine lift- Roller chassis- chain memoryused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr. -No: 1471196 built in 1970Capacity: 250 kgLifting height: 3.0 mLifting speed: 8.0 / 4.0 m / min.Fine lifting speed: 2.0 / 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-strandedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric cable factory TPS type SH 512/525Fabr. -No: 9913456 Year 1999Load capacity: 250 kgLifting height: 10 mLifting speed: 5.0 m / min.Rope diameter: 3.0 mmPower: 530 WPower connection: 220 V / 50 HzWith- Trolley Yale for double T-barsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Helical flanged train Fabr. CLOUD TYPE TRALIFTFabr. -No: 107681 Year 1995Load capacity: 1.0 tChain length: 23 mLifting height: 22 mused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 NFabr. -No: 1730966 built in 1970Technical specifications:Load capacity: 500 kgLifting height: 3000 mmMain lifting speed: 10 m / min.With- chain case- single fall 500 kg- control cables- Manual landing gearused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal winch / cable winch make VEB Wilsdruff type 52.3Fabr. -No: 378, TÜ no. 5/4060/139, built in 1990Technical specifications:Tensile force: 3 kN (300 kg)Cable speed: 10 m / minRope diameter: 8 mmPermissible number of rope systems: 4Motor power: 0.55 kWWeight: 140 kgWith- hook- Control buttonsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFManufacture -No: 5550183Technical specifications:Load capacity: 125 kgChain Length: 3.0mLifting speed: 8.0 m/min.Fine lifting speed: 2.0 m/min.With- Chain hoist manually 1-strand- control cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make ABUS type GM 3 500.6-111Fabr.-No: D665223/074 year of manufacture 1990Technical specifications:Load capacity: 500 kgLifting Height: 3.0mLifting speed: 6.0 m/min.Precision stroke: 1.5 m/min.Motor power: 0.11 / 0.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motor cable reel Manufacturer : Wampfler Type : EB040625-W100.3/40/10-90-HMK8/KN90L4 Free sag, drum on the mobile device Speed 30m/min. m. 50 mtr. Cable 4x16 mm² Condition : New, may have slight scratches/marks, comes from stock. Scope of delivery/information : see the pictures. Internal No.: Werkst. EG R2 P16 Werkst. EG R2 P18 Werkst. EG R1 P06

-Prefab. wiring system MWM 12323818 & 12323819 - Suitable for several motors - Please note! Price per piece! -12323818 ; 1232-3818 ; 1232 3818 - Predecessors: 12479560 ; 1247-9560 ; 1247 9560 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of s ...

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Rubber flat cable 12x1,5, RHEYFLAT-N NGFLGOEU-J, Nexans, new 1 x 100m, 1x23m Special price As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. In dry, damp and wet rooms as well as outdoors as a flexible energy and control cable, under medium mechanical loads. The cables are intended for the connection of moving parts of machine tools, conveyor systems, cranes, etc. if the cables are only exposed to bending stresses in one plane. Veins grouped into groups, the individual groups are separated by a bridge.