electric used for sale

three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Gear motor, electric motor -Geared motor for: Steinbock LE 15-60 MK IV A-1 electric forklift truck -Connection: 24 volts -Dimensions: 400/300/H160 mm -Weight: 25 kg

Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

Three-phase motor, electric motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 190/110/H155 mm -Weight: 4.9 kg

Three-phase electric motor VEM KPR 160 M4 TWs ( KPR160M4TWs ) 18,000 5 kW 1455 rpm 380 / 660 V IP 54 shaft diameter: Ø 48 mm flange diameter inside 25 cm, outside 34.80 cm used, tested ! Dimensions: 610 x 350 x 420 mm

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg

Three-phase motor with 2 speeds, electric motor -Handover in its current condition as inspected -Foot: damaged, see photo -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg

Electric motor, three-phase motor -Power: 1 kW -Speed: 1400 rpm -Shaft: Ø 18 x 50 mm -Construction: B5 -Dimensions: 310/280/H250 mm -Weight: 22 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 x 60 mm -Construction: B5 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 450/310/H257 mm -Weight: 55 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 2870 rpm -Shaft: Ø 38 x 70 mm -Construction: B5 -Price: per piece -Number: 2x available -Dimensions: 455/326/H250 mm -Weight: 56 kg

Three-phase electric motor DUTCHI NL Type: DM 160 M2 ( DM160M2 ) Power: 11 kW Speed: 2935 rpm Voltage: 230/ 400 V amperage: 35.3/ 20.4 A New !' frequency: 50 Hz/ 60 Hz degree of protection: IP55 with flange

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 470/216/H165 mm -Weight: 36 kg

Electric motor, three-phase motor -Power: 0.37 KW -Speed: 2725 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 235/133/H180 mm -Weight: 7 kg

Three-phase electric motor with brake ORIENTAL MOTOR 51K90GU - SWM ( 51K90GU-SWM ) 90 W 1300 rpm 200 V 3AC 50 Hz 60 Hz - Operation is possible ! Shaft with gear: Diameter: Ø 11 mm, Length: 20 mm, Teeth: 10 Flange: Ø 83 mm / 90 x 90 mm Bolt circle diameter: Ø 104 mm Hole diameter: Ø 7 mm approx. 0.5 m Connection cable Used, tested ! Dimensions: 200 x 107 x 92 mm

Three-phase motor, electric motor -Power: 30 kW -Speed: 2945 rpm -Protection class: IP 55 -Construction: B5 -Shaft: Ø 55 mm -Number: 1x available (1x without fan cover and fan disc) -Price: per piece -Dimensions: 760/400/H500 mm -Weight: 237 kg

Three-phase electric motor SEW DFR63M4 0.18 kW 1320 rpm 220 / 400 V IP 55 shaft diameter: 10 mm flange diameter: 120 mm spare part for Köberlein S 160 700 ! Dimensions: 240 x 140 x 170 mm

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

geared motor, electric motor -Origin: from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 1300 rpm -Power: 0.75 kW -Shaft: Ø 24 x 45 mm -Dimensions: 320/160/H200 mm -Weight: 20 kg

Gear motor, electric motor -Motor comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 200 rpm -Power: 0.65 kW -Shaft: Ø 25 x 60 mm -Flange diameter: 80 mm -Number: 13x available -Price: per piece -Dimensions: 176/176/H315 mm -Weight: 14 kg

Electric motor, three-phase motor -Voltage: 36V -Speed: 320 rpm -Shaft diameter: 19 x 40 mm -Dimensions: Ø 167/H199 mm -Weight: 16 kg

Chain hoist with electric chassis, trolley HADEF TYPE 30 / 85 ( 30/85 ) Payload: 1000 kg Chain length: approx. 5 m Lifting speed: 1,1,00 5 / 6 m/min Travel speed: 4 / 16 m/min Beam width: approx. 100 - 180 mm Lifting motor: 0.37 / 1.5 kW Travel motor: 0.06 / 0.25 kW voltage 380 V 3AC 50 Hz cable length control bottle: approx. 3.0 m cable length power cord: approx. 20.0 m used, tested ! Dimensions: 600 x 600 x 450 mm

Electric motor, light current motor -Power: 0.37 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Design: B5 -Protection class -Dimensions: 265/143/H143mm -Weight: 9.4 kg

electric motor, three-phase motor -Voltage: 36 V -Power: 0.37 kW -Speed: 320 rpm -Shaft diameter: 19 x 40 mm -Dimensions: Ø 166/H192 mm -Quantity: 2 available -Price: per piece -Weight: 14 kg

Electric cylinder, with swivel attachment PAGUS stroke approx. 1000 mm rod diameter Ø 115 mm, with extension: Ø 75, length: 200 mm rod eye: Ø 32 mm rod thread: M16 x 1.5, length: 32 mm flange diameter: Ø 155 / 180 / 250 mm, thickness: 17 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 12.5 mm 2x swivel pin: Ø 30 mm, length: 45 mm pivot pin spacing: 185 mm without drive ! used, tested ! Dimensions: 1890 x 275 x 250 mm

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg

electric motor, three-phase motor -shaft output on both sides -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Design: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg

Brush deburring machine, wire brush RAIMANN & CIE USM 58 Bj: 1987 Rürsten diameter approx. 280 mm Table dimensions 500 x 160 mm Table heights and distance adjustable 1500 u. 3000 rpm 2,2,2,000 rpm 2 kW 380 V Dimensions: 700 x 600 x 700 mm

indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Electric motor, three-phase motor with 2 speeds -Power: 0.3 kW -Speed: 1375 rpm -Shaft: Ø 22 mm -Construction: B3/5 -Protection class: IP 33 -Dimensions: 265/142/H163 mm -Weight: 9.5 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1400 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 33 -Dimensions: 260/220/H240 mm -Weight: 12 kg

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -double shaft output -Design: B3 -Protection rating: IP33 -Dimensions: 370/250/H190 mm -Weight: 16 kg

Three-phase motor, electric motor -Power: approx. 4 kW (no nameplate) -Speed: 780 rpm -Shaft: Ø 30 mm -Construction: B35 -Protection class: IP54 -Dimensions: 530/420/H400 mm -Weight: 107 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

Electric motor, three-phase motor -Electric motor for hydraulic pump and comes from a hydraulic press (ID18710) -Manufacturer: Schoen type UTE/B -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Anzahl: 1x available -Dimensions: 445/360/H300 mm -Weight: 62 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 940 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 280/230/H200 mm -Weight: 14 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 365/280/H250 mm -Weight: 27 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 24 x 50 mm -Construction: B34 -Flange: Ø 160 mm -Number: 3 motors available -Price: per piece -Dimensions: 350/246/H205 mm -Weight: 31 kg

HADEF electric chain hoist Payload 1,500 kg Lifting speed 1/4m/min with electric chassis Travel speed 4 / 16 m / min Chains 7/8 x 23 mm Complete electrics and traction motors for crane bridge available - Compact design -

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, servo cylinder -Piston: Ø 32 mm -Stroke: 100 mm -Gliding guide -Stepper motor -Spindle pitch: 8 mm -Brake -Robotics cable -LECP6/LECA6, PNP, version with cutting data input -DIN- rail mounting -Dimensions: 630/320/H460 mm -Weight: 56 kg

three-phase motor, electric motor -Power: 4 kW -Speed: 2900 rpm -Shaft: Ø 28 x 60 mm -Recess: Ø180 mm -Bolt circle: Ø215 mm -Hole spacing lengthwise: 140 mm -Hole spacing across: 190 mm -Design: B5 -Protection class: IP 44 -Dimensions: 380/300/H250 mm -Weight: 33 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Design: B5 -Hole circle: Ø 213 mm -Recess: Ø 180 mm -Flange: Ø 250 mm -Protection rating: IP 44 -Dimensions: 487/325/H252 mm -Weight: 60kg

Electric motor, three-phase motor -Voltage: 240/415 V -Power: 0.12 kW -Speed: 680 rpm -Shaft: Ø 15 x 85 mm -Construction: B14 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 295/185/H140 mm -Weight: 7 kg

three-phase motor, electric motor -Power: 1.5 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Flange: Ø 160 mm -Protection class: IP 54 -Dimensions: 330/255/H190 mm -Weight: 25 kg

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Shaft: 38 mm -Design: B5 -Protection rating: IP54 -Quantity: 1 available -Dimensions: 510/290/H330 mm -Weight: 86 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Quantity: 2 available -Price: per piece -Dimensions: 320/198/H220 mm -Weight: 12 kg

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

Electric motor, three-phase motor -Power: 0.52 kW -Speed: 2785 rpm -Shaft diameter: 14 mm -Construction: B3 -Protection class: IP 56 -Dimensions: 205/125/H175 mm -Weight: 8 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 12 mm -Construction: B5 -Flange: Ø 120 -Protection class: IP 54 -Dimensions: 290/192/H146 mm -Weight: 10 kg