130,801 used machines on RESALE, but how to find them? Machine Search
Drive motor, DC servo motor LENZE type GFQUBT 112-22Spindle motor, electric motorSeries No. 0239398K Year of manufacture: 1993Nominal power: 6 kWook voltage: 400 DCNenncurrent: 18 ampereMaximum speed: 1000 rpm. Excitation voltage: 210 VDCEexciter current: 3.4 ampereShaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge)Centering flange diameter: 230 mmBolt circle diameter: 264 mm, 4x 14 mm holesLonglife speedometer HÜBNER type TDP 0.2 LT-4Speedometer voltage: 60V / 1000
Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,
Package sale of electrical and electrical parts 2x Beckhoff, monitors, type C3640, used 1x Beckhoff Contropanel, type CP7031-0002, used 1x Bosch-Rexroth, Indrat View P19, BTV, used 7x INAT, Echolink 100, used 27x Lumiflex, Passive Mirror, 0-4m, used 10x Lumiflex, Passive Mirror, 0-8m, used 5x Lumiflex, type Areal Transmiter AT-500/2, used 4x Lumiflex, Electronic, used 4x Lumiflex, Light Curtain Electronic, used 4x Siemens S5, used 12x Klöckner-Moeller, fuse disconnector, type GSTa 1, new 8x Klöckner-Möller, fuse socket, PS33/cohlzahl 3, 63A, 660V, New 1x Hydrocompensator, hk 5000 1x Siko Seiki, STP control, Unit STP -300C 1x Sony Monitor
E-chain hoist, electric hoist, crane STAHL type Si T 201-10/2,5No.: 1202373 year of construction 1989Load capacity 250 kgHook travel = lifting height 3.5 metersLifting speed 10 m/min. Fine lifting speed 2.5 m/min.2 load strands = 250 kgCable length of operating bottle approx. 1.4 metersMains connection 400 volts, 50 Hz.- Suspension eye on the top of the craneWeight: 22 kgGood condition; used
E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used
E-Chain Hoist, Electric Hoist ELEPHANT / FBH (Japan) Type F(S)2-A(B4-B6)M(P-G)Fabr. No. 03278 Year of construction 1997Lifting capacity: 2000 kgHook travel 2.6 metersHood lifting speed 3.8 m/min. Fine stroke speed 1 m/min. Chain size 7.1 x 21 / quality class 8Cable length operating bottle approx. 2.5 metersMains connection 400 volts, 50 Hz.2 load trains = 2000 kg- emergency offdead weight 70 kggood condition; used
Electric carriage, electric trolley for chain hoist, crane trolley, chassis, trolley for double T-beams STEEL type GU-A035400Fab.Nr. 0104671 year of construction 1986Load capacity approx. 1100 kgRoller diameter approx. 80 mmTrack width from 65 mm to 110 mmTravelling speed 12.5 m/minEngine power 0.42 kWNe-connection 380 Volts, 50 Hz.Weight 20 kgGood condition; used
Machine: Heating press Heating area: 3700 x 1400 mm Max. temperature: 180 °C Power: 37 kW Control: Digital with Auto Timer + Audible/Light Alert Tabletop: anodized aluminum, double-sided heated System: Vertical pneumatic opening/closing Working height: 1000 mm Total dimensions: 4610 x 1580 x 1790 mm Weight: 1635 kg Mobility: Ø125 mm swivel wheels with brake Power supply: 220/400 V, 3~, 50/60 Hz Auction-ID: A1-46801-31
Electric Stacker / Pedestrian Stacker – new For sale is an electric stacker truck in a robust industrial design. The device is new and has never been used. Ideally suited for warehouse, workshop, industry or shipping. Details: Electric Stacker / Pedestrian Stacker New condition Never used Robust industrial design Load capacity up to 1000 kg Lifting height up to 1600 mm Year of construction 2022 Auction-ID: A7-46779-12
Electric Stacker / Pedestrian Stacker – new For sale is an electric stacker truck in a robust industrial design. The device is new and has never been used. Ideally suited for warehouse, workshop, industry or shipping. Details: Electric Stacker / Pedestrian Stacker New condition Never used Robust industrial design Load capacity up to 800 kg Lifting height up to 2,500 mm Year of construction 2022 Auction-ID: A7-46779-10
Electric Stacker / Pedestrian Stacker – new For sale is an electric stacker truck in a robust industrial design. The device is new and has never been used. Ideally suited for warehouse, workshop, industry or shipping. Details: Electric Stacker / Pedestrian Stacker New condition Never used Robust industrial design Load capacity up to 1000 kg Lifting height up to 1600 mm Year of construction 2022 Auction-ID: A7-46779-11
Electric Stacker / Pedestrian Stacker – new For sale is an electric stacker truck in a robust industrial design. The device is new and has never been used. Ideally suited for warehouse, workshop, industry or shipping. Details: Electric Stacker / Pedestrian Stacker New condition Never used Robust industrial design Load capacity up to 1000 kg Lifting height up to 1600 mm Year of construction 2022 Auction-ID: A7-46779-13
Electric Stacker / Pedestrian Stacker – new For sale is an electric stacker truck in a robust industrial design. The device is new and has never been used. Ideally suited for warehouse, workshop, industry or shipping. Details: Electric Stacker / Pedestrian Stacker New condition Never used Robust industrial design Load capacity up to 800 kg Lifting height up to 2500 mm Year of construction 2022 Auction-ID: A7-46779-14
CABLE WINCH ELECTRIC 12V, 2000 LBS Winch 12 Volt, horizontal pulling force approximately 900 kilos, (2000 Lbs) Includes approximately 15 meters of cable with safety hook. With manual operation. Winch up and down electrically. Easy assembly. Consumes 120 amps at 907 kg. Auction-ID: A1-46851-84
CABLE WINCH ELECTRIC 12V, 2000 LBS Winch 12 Volt, horizontal pulling force approximately 900 kilos, (2000 Lbs) Includes approximately 15 meters of cable with safety hook. With manual operation. Winch up and down electrically. Easy assembly. Consumes 120 amps at 907 kg. Auction-ID: A1-46851-85
CABLE WINCH ELECTRIC 12V, 2000 LBS Winch 12 Volt, horizontal pulling force approximately 900 kilos, (2000 Lbs) Includes approximately 15 meters of cable with safety hook. With manual operation. Winch up and down electrically. Easy assembly. Consumes 120 amps at 907 kg. Auction-ID: A1-46851-86
3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...
Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.
Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...
Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.
Manufacturer: Siemens Type: 1LA6 186-4AA71 22.0 kw
Two three-phase motors 380-415 V - 50 Hz 0.9 KW - 2820 RPM Protection class IP 20 Never been in use
Used from plant disassembly. Siemens Simodrive Posmo-SI with Alpha gearbox Engine: 6SN2500-2BF00-0GG0 Transmission: TP 050-MF1-5 -071-000 Dimensions L x W): approx. 65 x 25 cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.
Used Electric Motors – As-Is Condition | Fixed Price per Kilogram We offer a large and diverse batch of used electric motors, originating from various well-known manufacturers. These motors vary in size, power, and configuration, including standard IEC motors, specialized industrial motors, and customer-specific models. The full list includes over 150 units, all clearly labeled by type and model. These electric motors are sold strictly in their current condition (as-is). They have been visually inspected for identification and listing purposes and came of running installations. Key Notes: Condition: As-Is (used, untested, without warranty) Pricing: Offered at a competitive fixed price per kilogram (P/KG) Packaging: All motor packages are prepared by HOS BV Volume: Large, mixed batch of units; ideal for resellers, refurbishers, or parts recovery For a full list of motor typ ...
Electric motor ALMO MTA 132 SX2 recon Ball bearings renewed from the rotor. Seals renewed. The engine has slight traces of smoke but is in an overhauled and installable condition. Data from the engine see pictures.
Electric motor AEG IP 54 Year of construction 1991 Type AM180LC 22kW Price 250,00€ net
Electric motor AEG IEC 225M IMB 5 Year of construction 1996 Type AM 225 MC 404 52kW Price net 250
Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net
Technical details Input voltage: 220 V Input frequency: 125 Hz Input current: 8 A Noise level: 65 dB Protection type (IP code): IP67 Power take-off speed (max.): 1,500 rpm (The electric motor has been used for retrofitting diesel-powered trucks to electric or hydrogen-powered ones. A hydraulic pump can also be added to it. A drawing of the electric motor with an attached pump is provided.) The Permanent Magnet Synchronous Motor (PMSM) is an AC electric motor that uses permanent magnets in the rotor instead of electromagnetic windings, resulting in high efficiency, power density, and a high torque-to-inertia ratio. These motors require complex, digitally controlled inverters for operation and are used in high-performance applications such as robotics, electric vehicles, and high-efficiency appliances like washing machines. Rotor: Unlike induction motors, the rotor is equ ...
WEG NBR 7094~ ~ 3 160 M No. 0298 NA 98795 INDUCTION MOTOR M2 60 COD: N HP 15 (20) RPM: 3540 F3 1.15 (53) F 80 K 7.7 IP 55 220/380/440 V 50.0/ 28.9/25.0 A
THREE-PHASE INDUCTION MOTOR MANUFACTURER: EBERLE MODEL: B 130 - L8 No. 075/0106 15 HP 11KW 60 HZ 870 RPM INCOME: 90.0% COS 0.70 IP/IN 5.1 ISOL. F CAT. N REG SL IP 55 FS1.15 BEARING - INTERV. LUB - QT GREASE - TYPE OF GREASE LA 6311.03 20,000 HS 20 g POLYREX LOA 6311.03 20,000 HS 20 g MASS 134 KG
A used newly stored electric motor is offered see pictures. Price is a matter of negotiation.
Electric motor Flender ATB-Loher ANGA-315LB-42P 142/172 kW -unused - Electric motor Loher Flender - Model: ANGA-315LB-42P - 142 / 172 kW - 1480 / 2980 / min - 50 Hz - 1.21 t
Three-phase motor, electric motor -Power: 10 kW -Speed: 1460 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Dimensions: 565/370/H320 mm -Weight: 108 kg
Three-phase motor, electric motor -Power: 0.55 kW -Speed: 1370 rpm -Shaft: Ø 19 x 38 mm -Construction: B5 -Dimensions: 280/220/H200 mm -Weight: 9 kg
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 24 x 48 mm -Construction: B5 -Protection class: IP 44 -Number: 2x motors available -Price per piece -Dimensions: 350/270 / H250 mm -Weight: 20 kg
Electric motor, three-phase motor -Power: 5.5 kW -Speed: 2828 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Dimensions: 450/330/H300 mm -Weight: 57 kg
Electric motor, three-phase motor -Manufacturer: Caenaho, electric motor from milling machine Stankoimport 6P / 2 -Type: 4A132S4Y3 -Power: 7.5 kW -Speed: 1450 rpm -Voltage: 220/380 V -Shaft: Ø 38 x 80 mm -Construction: B5 -Dimensions: 470/348 / H370 mm -Weight: 82 kg
Three-phase motor, electric motor -Power: 4.0 kW -Speed: 1430 rpm -Shaft: Ø 28 x 65 mm -Construction B3 -Dimensions: 430/300/H265 mm -Weight: 67 kg
Three-phase motor, electric motor -Power: 15 kW -Speed: 1450 rpm -Shaft: Ø 36 x 135 mm -Construction: B14 -Dimensions: 840/320/H425 mm -Weight: 127 kg
Gear motor, electric motor, electric gear motor -Speed: 1400 rpm -Power: 1.5 kW -Brake: 20.0 Nm -Shaft on both sides: Ø 14 x 20/19 x 40 mm -Protection class: IP54 -Dimensions: 430/200/H260 mm -Weight: 27 kg
Three-phase motor, electric motor -Power: 4 kW -Speed: 2940 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP44 -Dimensions: 380/290/H220 mm -Weight: 39 kg
maximum number of results exceeded
please refine your search
7.900 € 
