electric motor used for sale

Lift height: 3680mm, free lift: 160mm, load capacity: 5000kg, load center: 500mm, sideshift carriage: 1310mm, sideshift: +/-100mm, fork length: 1600mm, cross section: 130mm/60mm, battery weight: approx. 2200kg. Machine dimensions Y/Z: approx. 1400mm/3700mm, operating hours: approx. 3416h. Documentation available. An inspection on site is possible.

TIG welding machine for TIG DC welds Brand: Oerlikon Citotig DTW 256; Fabr.Nr. 91762 Item Condition Little used, very well preserved, Special features inert gas, Scope of application Steel, stainless steel, non-ferrous metals For plants, machinery and steel construction, pipeline and industrial construction, Robust, versatile control and operation modes With intermediate hose package, welding hose package; Welding torches, ground cables, gas hose with pressure reducer Industrial equipment for precision welding Mains connection: 3 x 400 V /50 - 60 Hz; IP 23 Application voltage range: approx. 10.1 – 20 V DC Welding range at: 2 - 250 A With mobile frame to accommodate the machine with gas cylinder (not in the scope of the machine) Dimensions Length x width x height: 1000 x 420 x 1130 mm

weight max. in kg: 2000 kg stroke: 3,3 mm fork length: 1200 mm battery: 48V / 575Ah weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1,2 x 3,5 x 2,19 m Electric forklift with charger. Only 2500 operating hours New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6 KW, 9 kVA, 380 V

Generator set Geko type: 9001 9 KVA Runs great and can be demonstrated before Type: 9001 ED-AA/SHBA (SEBA) Motor Briggs & Stratton 18 HP-V-Twin - Petrol Connection: 1x Schuko 230V 1x CEE 230V 32A 2Pol 1x CEE 380V 16A 5Pol Power: 9kVA Operating hours: 842 h Weight: approx. 124kg No warranty, no returns Input errors and errors excepted

Panel size: 1350 x 3000 mm Pressing capacity: 90 ton  Plate Type: Hard Aluminum Plates  Travel+opening 400mm Cylinders 6 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface  All-round tension via spring system of the Myler protective film 

2 pieces of diesel generators in parallel operation Engine Type: Caterpillar 3512HD Power each: 1875 kVA Total power: 3750 kVA Year: 2008 Operating hours: approx. 220 Cooling: Water Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Tank: 2000 liters Generator: Caterpillar SR4B Type: Container Both power generators only ran in parallel in emergency power or trial operation.

Load capacity 25,000 kg Lifting speed 0.8/3.2m/min Lifting height 4 m Strand count 2 Chain 23.5 x 66 mm Operation via hand remote control - conversion to radio possible Engine group 1Bm / m3 Electrical values 400 V / 3.1 / 12.5 KW Weight without carrier frame 780 kg Documentation available - good condition - little used - PRICE ON REQUEST!

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

Cooking Unit: Stainless Steel Berner with Induction Stove 269x70x70 cm for Pedestal Mounting Cooking block with left 2 sliding doors and 3 drawers each 30x50x10 cm, sliding door cabinet 121x60x36 cm, in the middle induction stove 4 plates, hob size 65×56 cm, with pot detection, 400 V, 14 kW, 20 A, direct connection, storage compartment at the bottom 71x70x33 cm additionally 2 sockets with 230 V, right 3 drawers each 30x50x10 cm, high-quality gastro fitting, for base mounting, feet optionally available, also freely available in the room, Original price approx. 18000,00 €

Nominal load 1200 kg Running time 10287 h

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 3200 mm high: 2060 mm weight of the machine ca.: 0,8 t dimensions: 1,95 x 0,86 x 2,06 m Pallet truck with inklude charger ve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.

This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S150iA was manufactured in 2015. Its an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

table diameter: 600 mm table load: 250 Kg swivelling range: 0 - 135 Grad turning speeds: 0,03 - 2,0 U/min connected load frequency: 400 V weight: 0,4 t Dimensions (LxWxH): 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Big Ass Battery Test Unit The battery storage system has a capacity of 195kWh. It is about 2 years old with very few operating hours. The whole thing comes from a development/test environment and is ideal for energy storage projects, electric vehicles Charging technology, prototyping or parts Extraction. It has just been serviced by Big Ass Battery, including protocol and is therefore immediately ready for use.

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

This HAITIAN ZE1900 was manufactured in 2019. It features a clamping force of 1900 kN, a maximum injection volume of 412 cm³, and a screw diameter of 50 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the HAITIAN ZE1900 machine we have for sale. Contact us for more information about this machine.

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

3 Containers - Power Generators MTU 16V4000G63 Total power in parallel operation: 6750 kVA Single power: 2250 kVA Year: 2015, installed in container 2023 Operating hours: approx. 1600 / 1600 / 2600 Cooling: Water with radiator Speed: 1500 1/min Tank: approx. 4600 liters Voltage: 400/231 V, 50 Hz Switchgear: Control DEIF AGC4-MK2, also for parallel operation, circuit breaker 4000 A Subject to prior sale - errors possible! Internal reference number: E-1004-109

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor

8 Pieces Diesel Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

weight max. in kg: 1500 kg fork length: 1150 mm stroke height: 3000 mm high: 2090 mm weight of the machine ca.: 0,5 t dimensions: 1,69 x 0,78 x 2,09 m Pallet truck with - 24V/80Ah lithium-ion battery - charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine.

weight max. in kg: 1200 kg stroke: 3600 mm fork length: 1150 mm battery: neu in 2022 / 48 V total power requirement: - kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2 x 1 x 2,4 m DUPLEX Mast Side Shifter Connection for auxiliary equipment Battery new in 2022 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

table diameter: 790 mm table load: 500 Kg swivelling range: 0 - 135 Grad turning speeds: max. 2,0 U/min connected load frequency: 400 V weight: 0,95 t Dimensions (LxWxH): 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1000 kg fork length: 1250 mm stroke height: 1600 mm high: 1940 mm weight of the machine ca.: 0,4 t dimensions: 1,69 x 0,78 x 2,09 m Pallet truck with - new 12-volt battery - charger - electric lift - manual drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, servo cylinder -Piston: Ø 32 mm -Stroke: 100 mm -Gliding guide -Stepper motor -Spindle pitch: 8 mm -Brake -Robotics cable -LECP6/LECA6, PNP, version with cutting data input -DIN- rail mounting -Dimensions: 630/320/H460 mm -Weight: 56 kg

Test clamp for electricity -Number: 3x available -Price: per piece -Weight: 4.2 kg

electric heating, electric radiator, heating coil, electric tubular heating element -Power: 600 watts, 120 volts -Width: 400 mm -Height: 100 mm -Depth: 250 mm -Number: 11 available -Price: per piece -Weight: 4 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Manufacturer motor Siemens type: OR8 9-2 -Manufacturer gearbox Siemens type: K460-2b -Motor power: 0.2 kW -Speed range: 90 rpm -Motor: adjustable -Construction: B5 -Drive shaft: Ø 20 mm -Price: per piece -Number: 4x available -Dimensions: 435/350/H300 mm -Weight: 33 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 40 rpm -Power: 0.7 kW -Construction: hollow shaft -Diameter hollow shaft: 41 mm -Protection class: IP 57 -Number: 1x drives available -Price: per piece -Dimensions: 500/520/H310 mm -Weight: 32 kg