electric motor used for sale

2 identical diesel gensets available MWM TD602V16 AvK generator with 700 kVA Operating hours approx. 1200 per unit Incl.: Radiator Silencer Cabinets Technical documentation Disassembled and immediately available Subject to prior sale - errors possible Internal reference number: E-1159

Motor power: 565 kW AvK generator with 660 kVA, year of construction 2000 Diesel generator was used as an emergency generator, therefore only about 145 operating hours in test operation. Subject to prior sale - errors possible Internal reference number: E-1160

Container generators with 2 CAT C32 units with 1000 kVA power each Generator: Stamford HCI634J2 Operating hours: Only 21 Cooling: Water Speed: 1500 rpm Voltage: 400/231 V, 50 Hz Tank: 4x 860 litres The generator was used in an emergency power system, the condition is excellent. The last test run took place in November 2022. Subject to prior sale - errors possible Internal reference number: E-1004-54

electric servomotor, electrical actuator for sale. 3 pieces available, 2x original packaging, 1x without

Sound-insulated generator with Perkins diesel engine Power: 60 kVA Year: 2020 Operating hours: None Generator: Stamford / AvK S1L2Y1 Voltage: 400/231 V, 50 Hz Cooling: Water Tank: 175 litres Control panel: Manual and automatic operation with ComAp AMF9 generator circuit breaker, socket distribution Subject to prior sale - errors possible Internal reference number: E-1004-55

current capacity: max. 13 KW throat: 120 mm contact pressure capacity: max. 120 kp voltage: 400 V open-circuit voltage: 2,5 V welding power: max. 2 x 2mm Blech fuse protection -thermal: 16 A total power requirement: 13 kW weight of the machine ca.: 12 kg dimensions of the machine ca.: 0,5 x 0,1 x 0,2. m Manual spot welding machine with 2 sets of welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Key data: 2613 , 3194 , 6300

2613 KW KKK condensing steam turbine Twin AFA46 GT6 from 2004 in good condition, used for sale. Manafacture: KKK Model: AFA 46 GT6 Type: Steam Condensation Serial Number: 4.746.137 Power [KW]: 2.613 Pressure inlet [bar]: 29 Temperature inlet [°C] 360 Pressure outlet [bar]: -0.8 Year of construction: 2004 Weight [kg]: – Dimensions LxWxH [cm]: – More information here: stromerzeuger-discount.de/angebote/dampfturbinen/2610-kw-kkk-twin-afa4 6-gt6/

Key data: 525 , 700 , 400

525 kW Tuthill Coppus condensing steam turbine RLHA24 from 1999 in good condition used for sale. Manufacturer: TUTHILL Coppus Model: RLHA 24 Type: Steam Condensation Serial Number: 99H5046 Performance mech. [kW]: 525 Pressure inlet [bar]: 16 Temperature inlet [°C] 350 Pressure outlet [bar]: 0,70 Year of construction: 1999 Weight [kg]: 5700 Dimensions LxWxH [cm]: - More information here: stromerzeuger-discount.de/angebote/dampfturbinen/tuthill-coppus-rlha24 /

Brand Bauer Model: GF-24KW Year of construction: Unused, 2023 Serial Number: On request Capacitance (KvA) 30 Capacity(kw) 24 Engine model ZH4100D Fuel: Diesel Alternator model YHG-24KW Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 43.3 Dimensions LxWxH (mm) 1600 x 760 x 1650 Weight (Kg) ca 600 Number of pieces in stock 2 Made in China Comments Unused open skid diesel generator, Smartgen genset controller

Power: 300 kVA Cooling: Water with front-mounted cooler Speed: 1500 1/min Tank: approx. 1400 litres in the base frame Generator: Mecc Alte ECO 38-2LN/4 Voltage: 400/231 V, 50 Hz Control panel: Generator switch, manual control DSE 3110 Socket distribution, terminal block for total outlet. The large base frame tank allows for a long runtime. Due to the power distribution and the large terminal block, it can also be used as a rental unit. Subject to prior sale - possible errors1 Internal reference number: E-1004-63

Power: 900 kVA Cooling: Water with front-mounted cooler Speed: 1500 1/min Generator: Stamford HCI 634G1 Voltage: 400/231 V, 50 Hz Tank: approx. 1100 liters Subject to prior sale - errors possible Internal Reference Number: E-1004-65

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg

Power: 1400 kVA at 60 Hz, 1200 at 50 Hz - Currently set to 50 Hz! Hours: 778 Cooling: Water Speed: 1500 1/min Tank: 2000 liters Generator: Leroy Somer LSA 50 VL 10 Voltage: 400/231 V, 50 Hz Control Panel: LS 2000 A Generator, DSE 8610 MKII Deep Sea Control Was used as an emergency power system, therefore few operating hours Control and circuit breaker new! Subject to prior sale - errors possible! Internal Reference Number: E-1004-69

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric Scraper Manufacturer: Biax Type BS40 Very good, tested and ready for immediate use. In original metal box. The scraper is particularly suitable for: - Extreme roughing work in large-scale mechanical engineering - Steel formwork on guide beds and machine stands in turbines, gearboxes and pump construction. Technical data approx.: Power [W] 320 W Noise level [db (A)] 82 db Weight [kg] 4.7 kg Stroke rate [min¹] 0-1,600 min¹ Stroke length [mm] 0-20 mm

2 Pieces Container Power Generator Engine can be powered by diesel or palm oil. Accessories for operation with palm oil are installed in the container. Year: 2012 and 2014 Hours: 1039 and 762 Power PRP: 1400 kVA Power LTP: 1650 kVA Cooling: Water Speed: 1500 1/min Generator: Stamford PI734D1 Voltage: 400/231 V, 50 Hz Ref-No.: E-1004-78 Subject to prior sale - errors possible!

current capacity: max. 13 KW throat: 120 mm contact pressure capacity: max. 120 kp voltage: 400 V open-circuit voltage: 2,5 V output voltage: 6300 A welding power: 2 x 2mm Blech fuse protection -thermal: 25 A total power requirement: 13 kW weight of the machine ca.: 12 kg dimensions of the machine ca.: 0,5 x 0,1 x 0,2. m Manual spot welding machine with 2 sets of welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Natural Gas Power Generators CAT G3516A COP power: 1280 kVA Overhauled and tested in 2017 Hours: 0 Power generator: AvKaick 1500 1/min 10.5 kV, 50 Hz Subject to prior sale - errors possible Internal reference number: E-1004-82

Conveyor width 800 mm Overall width 930 mm Width with control unit 1070 mm Working height adjustable from 720 mm to 950 mm Use: Conveying empty bags for filling, labeling or printing Marking or labeling of paper or plastic material Operating hours unknown

for sale AKSA Power Generator Inverter Model: AAP 2200 i Power: 2200 W 4-stroke, air cooling Sockets: 1 x 230 V, 12 V, USB Fuel tank capacity: 4.5 litres Voltmeter Starting system: cable pull Weight approx. 21 kg

SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...

Machine type: Submerged arc welding machine Manufacturer: Air Liquide / Oerlikon Type: CPQ170126926 / incl. power source, turn-tilt device, container rotation device Year of Make: 2017 Condition: used / very good, few operating hours Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-AIR-0824 DESCRIPTION We offer you a used UP welding machine from the manufacturer Air Liquide / Oerlikon. - Starmatic 1200i AC/DC - Citowave III / 420 - Posimatic PS15 / Tilt and Tilt Device - Container turning device Weight approx. 7t More detailed dates will follow Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact detail ...

table diameter: 650 mm table load: 600 Kg swivelling range: 90 Grad turning speeds: 0,2 - 3,0 U/min total power requirement: 0,55 + 0,4 kW weight of the machine ca.: 0,28 t Welding rotary tilting table - Remote control - 2 x welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FSA Electric Pallet Truck HUB15FLEX Load capacity 1500 kg Fork length 1150 mm Tandem rollers Battery 10Ah/48V Battery Discharge Indicator Built-in charger Weight approx. 125 kg 0041 62 922 68 28

Key data: 360 KW, 450 kVA, 400 V

Currently we offer a: Generator set Engine Iveco Type GE 8281 SRI 27.00 Power 450 KVA / 360 KW 50 Hz 400 volts Generator Stamford Type HCI534C1 RPM 1500 Phase 3 AVR MX 341 Year of manufacture 1996 You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

electr. Clutch brake, clutch brake combination -Manufacturer: Lenze, clutch-brake combination -Type: Simplatrol 14.113.08.1 = 24 V/15 W/77/40/VDE 0560 -Voltage: 24 V/15 W. -Dimensions: 135/155/235 mm -Weight: 4.5 kg

Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater -Manufacturer: Stego, switch cabinet heating -Type: CSF 060 -Power: 150 watts -Voltage: 120-240 V -Dimensions: 150/60/H90 mm -Weight: 0.4 kg

Including YUSHIN 5 axis servo robot - 21.5 HD Touch screen display - 23 languages - selectable - 10 stages of injection pressure & speed control - 6 stages of closing & 5 stages of opening via speed & position control - auto acceleration control - 10 stages of ejector control, 2 stage ejector and 4 patterns of ejector motion control - Simultaneous Ejector forward with clamp opening - Simultaneous clamp open and plasticising - Screw diameter: 20 mm - Injection volume: 24 cm? - Platen size h: 500 mm - Platen size v: 470 mm - Distance between tie-bars (h x v): 360 x 320 mm - Ejector force: 5 / 20 (2.0tonf) / 70 kN - Power: installed max: 15.7 kW - Operating hours: 10.600 - Weight: 2.900 kg

Electric winch with junction box Manufacturer: Haacon Model No.: VTF 1400/213457/875285 The winch is new and unused, but may show signs of storage.

elektrische Pappschere - electric Board Cutter Robust PS 80 Serial-No. 19028 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Elektrostapler - electric Forklift STILL R20-18I Serial-No. R20-18I - Year 2005 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Motor: Thrige-Titan type MTL 11-7 D -Motor: 24 V 3 kW 3000 rpm -Tank: 200/290/H230 mm -Dimensions: 210/320/H510 mm -Weight: 42 kg

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Machining tank inner dimensions (W x D) 1040×780 mm X,Y,Z Strokes 600,400,270 mm U x V axis stroke 80×80 mm Max. taper angle ± 15° (Thickness: 120 mm)

weight max. in kg: 1000 kg fork length: 800 mm stroke height: 2500 mm total power requirement: kW weight of the machine ca.: 0,987 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps -Berg: clamping technology chip motor type FSP 140 U -Shaft: M22 x 1.5 -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Generators with diesel engine Manufacturer: MTU Type: 16V2000 Year: 2009 Hours: 8017 Power: 1125 kVA Cooling: Water with front-mounted radiator Speed: 1500 1/min Tank: approx. 1250 liters Generator: Leroy Somer LSA 50.2S4 C 6S/4 Voltage: 400/231 V, 50 Hz Equipment: Soundproofing hood with cooling, exhaust system, expansion joints, oil drip pan, manual and automatic switchgear, documentation. Subject to prior sale - errors possible! Internal reference number: E-1004-92

Electric screwdriver, servo screwdriver, with torque adjustment ATLAS COPCO QMR42-25-RT Tool holder: 3/8 R SERVO MOTOR: BSM 2260C-R4. 3 4230 1704 81 speed: max. 7000 rpm voltage: 22 V at 1000 rpm QRT38050 4230161380 New !' Dimensions: 590 x 120 x 45 mm

Elektromodul SCHULZ SYSTEMTECHNIK VC210/5 230 V suitable components: EL407, S482, EL873, EL872, EL875, EL876, EL877 used ! Dimensions: 480 x 420 x 130 mm

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg

Magnetic clamping plate, electric PAGUS 205 x 78 mm 220 V DC voltage 0.14 A Dimension: 300 x 78 x 78 mm

Electric Cylinder WARNER D12 - 20A8 - 04 4594 ( D12-20A8-04 4594 ) stroke: 100 mm 2000 N 12 V Gs IP65 New ! Dimensions: 300 x 160 x 85 mm

Electrical press BOSCH 0 608 750 049 with transducer, junction boxes and cables 0 608 600 001 0 608 701 014 0 608 870 347 3 607 021 015 Dimensions: 600 x 400 x 250 mm

Electric shaft drive, electric shaft winch, with limit switch ATB, DRIVE TECHNOLOGY G. BAUKNECHT 36W.09-E6 Speed: 9 rpm ( counted ) Shaft diameter: Ø 30 mm Wavelength: 80 mm Groove width: 8 mm motor: RF0, 37/2-7 1.0 kW 2800 rpm 220 / 380 V 3AC 50 Hz IP54 Gear base: 250 x 180 mm Hole spacing ( parallel to gear shaft ): 155 mm Hole spacing ( transverse to gear shaft ): 205 mm Hole diameter: Ø 13 x 17 mm ( slotted hole ) New ! ! Dimensions: 415 x 380 x 230 mm

Max. workpiece dimensions (W x D x H) 1050 x 820 x 305 mm Max. workpiece weight 1500 kg Table dimensions (W x D) 860x640 mm Machine travels (X x Y x Z) 600 x 400 x 310 mm Machine travels (U x V) ±75 x ±75 mm

weight max. in kg: 1600 kg fork length: 1450 mm stroke height: 200 mm high: 1150 mm weight of the machine ca.: 0,68 t dimensions of the machine ca.: 2,05 x 0,72 x 1,15 m incl. charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics