electric motor used for sale

General electric 183-18-0390-0

3 phase ONAN Transformer 20000V/400V Dyn 11, 50Hz From general service, new oil, Sale without guarantee, as is, where is

Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general ind ...

Electric roll Bending Machine 3 rolls Capacity: 800 mm x 3 mm Rolls diameter: Ø 105 mm Motor: 4 CV New electrical panel Front/back rotation Voltage: 220 V Tri (possibility of reversing the motor in 380 V) Equipped with: Emergency stop Equipped with: Protective cover Dimensions (L x W x H): 2000 x 1300 x 1300 mm Weight: approx 1,5 T

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

Several transformers for sale: Here a Schneider Electric 250KVA 10-0.4KV. Bj2016 mint condition Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

1 of un-used Warner Electric EC650 electro clutch assembly, KHS PN K0090039960, Warner Electric EC-650 clutch CL EC-650-28MM 24V SPECIAL (PN: 5281-111-003 / 5281-271-021), fitted with KHS 47-tooth sprocket PN: K0090039134.

Ref. no.: 18591 Manufacturer: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this ...

This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine.

This Mitsubishi Electric SG12M die-sinking EDM machine was manufactured in 2020. It features a robust 3750 kg weight, with a maximum workpiece weight capacity of 1000 kg. The machine includes a dielectric fluid chiller unit and a dual paper filter system, ensuring optimal operational conditions. The working tank has an automatic elevation system and hinji open-door for ease of use. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi Electric SG12M machine we have for sale. Contact us for more information.

This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15 LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information.

This 6s Mitsubishi Electric RV-4FLM robot arm was manufactured in 2018. It features a reach of approximately 649 mm and a payload capacity of up to 4 kg, making it suitable for various industrial automation applications. Consider the opportunity to buy this Mitsubishi Electric RV-4FLM robot arm. Contact us for further details.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches -Schneider Electric: Type NSX 160L LV429372 -Rotary drive with: extension -without: gear knob -Terminal cover: 1 -Dimensions: 240/105/H575 mm -Weight: 2.9 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm -Weight: 3.5 kg

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control -Type: Modicon TM241CEC24T -Input module: Modicon TM3DI8 -Dimensions: 175/90/H100 mm -Weight: 0.6 kg

PLC controller, electronic module, PLC control -Manufacturer: Schneider Electric, PLC control -Type: Modicon TM221CE24T -Number: 2x controllers available -Price: per piece -Dimensions: 110/105/H75 mm -Weight: 0.4 kg/pc.

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A -Output: 380-480V / 0-500 Hz / 173 A -Number: 2 frequency converters available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 55 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D55N4 -Power: 55 kW -Input: 380-480V / 50/60Hz / 97.2A -Output: 380-480V / 0-500 Hz / 106 A -Quantity: 1 frequency converter available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 54 kg/piece

Auxiliary switch, line switch, circuit breaker, load breaker, load disconnector, motor protection switch, circuit breaker, circuit breaker, auxiliary switch, main switch, on-off switch, cam switch -Manufacturer: Schneider Electric, circuit breaker switch disconnector -Type: NSX 400-630 F/N/H/NA -Rotary drive: with extension -Transport dimensions: 420/240/H200 mm -Weight: 7.7 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 32 -Type: ATV320U30N4B -Power: 3 kW -Input: 380-500V / 50/60Hz / 11.1A -Output: 380-480V / 0-599 Hz / 7.1 A -Number: 2 frequency converters available -Price: per piece -Dimensions: 320/60/H230 mm -Weight: 2.1 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 32 -Type: ATV320U11N4B -Power: 7.5 kW -Input: 380-500V / 50/60Hz / 5 A -Output: 380-480V / 0-599 Hz / 3 A -Quantity: 1 frequency converter available -Dimensions: 320/45/H230 mm -Weight: 1.7 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Schneider Electric, housing for crane remote control / pendant control -Type: XAC-A08 -Transport dimensions: 560/80/70 mm -Weight: 1.1 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D18M7C -Number: 1x contactor available -Dimensions: 80/45/H90 mm -Weight: 0.3 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

PLC controller, electronic module, PLC control, analog input/output module, temperature input module -Manufacturer: Schneider Electric, PLC controller Analog input/output module -Type: Modicon TM3TM3 -Quantity: 1x control unit available -Dimensions: 95/90/H30 mm -Weight: 0.1 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D09M7C / LRD10C -Number: 1x contactor available -Dimensions: 125/45/H85 mm -Weight: 0.5 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D245...C -Contactor coil: LX9FG220 -Number: 2x contactors available -Price: per piece -Dimensions: 200/170/H180 mm -Weight: 4.6 kg/pc.

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Easy Panel PC, Performance 18.5 -Type: HMIPSPS952D1X01 -Voltage: DC 12-24V -Dimensions: 470/55/H295 mm -Weight: 4.5 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Schneider Electric, Power Supply -Type: ABL 2REM24045H -Input: 100-120V/200-240V -Output: 24V / 100W -Number: 2 modules available -Price: per piece -Dimensions: 165/100H40 mm -Weight: 0.5 kg/pc.

PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB, isolated gateway Manufacturer: LCL, PCB isolated gateway made of Pro-face monitor Schneider Electric GP-4301TW -Type: GW101D.hex -Quantity: 4x circuit boards available (1x with accessories, see photos) Price: per piece -Dimensions: 130/125/H20 mm / 130/125/H25 mm -Weight: 0.1 kg / 0.3 kg

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Panel with Housing -Type: HMISTO715 -Voltage: DC 12-24V -Number: 2x panels available -Price: per piece -Dimensions: 150/145/H160 mm -Weight: 1.4 kg/pc.

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: Schneider Electric, circuit breakers, load break switches -Type: NSC400/630 K -Rotary drive: with extension -Dimensions: 255/140/H440 mm -Weight: 5.8 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V02D2/P04D0R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P4.0kW 0.1-320Hz -Number: 1x inverter available -Dimensions: 140/70/H155 mm -Weight: 0.9 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V01D5/P02D2R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P2.2kW 0.1-320Hz -Number: 2x inverters available -Price: per piece -Dimensions: 140/70/H155 mm -Weight: 0.9 kg/pc.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D09M7C -Number: 7x contactors available -Price: per piece -Dimensions: 80/45/H90 mm -Weight: 0.3 kg/pc.

Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor, front panel, touch screen, control unit, display, operator panel, touch screen, touch panel, multi-panel, touch multi-panel -Manufacturer: Schneider Electric, Pro-face Monitor -Type: GP-4301TW -Model: PFXGP4301TADW -Number: 2 monitors available -Price: per piece -Dimensions: 170/140/H60 mm -Weight: 0.7 kg/pc.

Size: 2000 x 950 mm Equipments: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG

GE Frame 6B Gas Turbine Complete Power Plant. Gas Turbine Model GE Frame 6B GT Model No. 6541B Manufacturer General Electric Year of Manufacture 1990 Equivalent Operating Hours (EOH) Approx. 120,000 Hours Plant Scope Complete Plant Fuel Type Natural Gas Frequency 50 Hz Rated Output Approx. 38–42 MW (typical for Frame 6B simple cycle Frequency 50 Cooling System Air / Hydrogen (subject to configuration) Excitation System Included 1. Gas Turbine Package Item Description Gas Turbine GE Frame 6B Combustion System Standard Combustion Starting System Included Lube Oil System Included Fuel Gas System Included Air Intake System Included Exhaust System Included Fire & Gas System Included GT Base & Enclosure Included Inlet Filtration Included

Overview Offered complete power plants, This unit is known for their high availability and flexibility in fuel use. Ideal for industrial power generation or as reserve capacity. Specifications • Model: GE Frame 6B (6541B) • Year of construction: 1986 • Operating hours (EOH): 114,000 hours • Operating system: Mark II (M-II) Control System • Configuration: Complete plant (Generator, Turbine and all auxiliary systems) • 1. Gas Turbine Package • Item Description • Gas Turbine GE Frame 6B • Combustion System Standard Combustion • Starting System Included • Lube Oil System Included • Fuel Gas System Included • Air Intake System Included • Exhaust System Included • Fire & Gas System Included • GT Base & Enclosure Included • Inlet Filtration Included • Main features • Complete 'Balance of Plant' (BOP): The sale includes not only the  ...

OFFER FOR SALE – GE FRAME 6 (6001B) GAS TURBINE GENERATING UNIT We are pleased to offer the following gas turbine generating unit for sale: Equipment Details Model: GE Frame 6 (6001B) Year of Manufacture: 1997 Commissioned: 1998 Output Rating: 34.49 MW Generator Output: 33.8 MW / 42.25 MVA Frequency: 50 Hz (convertible to 60 Hz) Operating Speed: 5,114 rpm Total Equivalent Operating Hours (EOH): 68,448 hours Fuel Capability: Dual Fuel (Natural Gas / Fuel Oil) Scope of Supply The package includes: Gas Turbine (GE Frame 6, Model 6001B) Diesel Starting System Accessory Gearbox (AGB) Load Gearbox (LGB) Generator Exciter Associated auxiliary systems and controls Maintenance History The unit has undergone scheduled major inspections, including: Combustion Inspections (CI) Hot Gas Path Inspections (HGPI) Major Inspections (MI) Upgrade History Major upgr ...

Machine Type: PB1E/S E42/24 (Electric) Year: 2008 Extruder Screw Diameter: 42mm Screw L/D Ratio: 24 Capacity : 1L Extruder Motor Power: 22kW Extruder Heater Power: 4.1kW Heating Zones on Plasticizing Cylinder: 3 Extruder Cooling Fans: 2 Plasticizing Capacity with PE: 24kg/h Plasticizing Capacity with BFPE: 26kg/h Working hours : 8000h Simple station Double head with 100 mm center distance. (2 x 500ml)

PLASTIBLOW Machine type: PB1E/D E60/25 (Electric) Year: 2007 Extruder screw diameter: 60mm Screw L/D ratio: 25 Molds: 2 Stroke: 260mm Clamping force: 35 Capacity : 3L Extruder motor power: 30kW Extruder heater power: 9.6kW Heating zones on laminating cylinder: 4 Extruder cooling fans: 3 Laminating capacity with PE: 58kg/h Laminating capacity with BFPE: 75kg/h Working hours : 24,000h Double station Dual head with 100mm center distance. Head modified from the original (3 heads with 85mm center distance => 2 heads with 100mm center distance) in 2021.