128,234 used machines on RESALE, but how to find them? Machine Search
Power supply: 380V-50Hz / 9 KW Volume: 4000cm2 Auction-ID: A7-48577-85
New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives
Exhaust gas generator to the cultivation in 16 l of Volvo Penta Industrial engine to the production of stream by use of the flue gas stream
Chain hoist with motorized chassis for steel beams, load capacity: 1,000 kg, lifting speeds: 5.4 m/min. (fast); 1.4 m/min. (slow), incl. hallway operation, without steel beams. Brakes and drives workshop overhauled / tested.
Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.
3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...
RECON Part number: 0400 5839 E-start Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Generators of 100 kVA (hood unit) power: 100 kVA / 80 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF45TE2F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 4-L Total displacement: 4.5 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 22.6 l / h Fuel consumption 75% PRP: 18.5 l / h Fuel consumption 50% PRP: 13.4 l / h Oil consumption under full load: 0.1% of fuel consumption Control: Mechanical Inner diameter output exhaust pipe: 70.3 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation ...
Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
1 STERLING STERLCO used diathermic oil boiler with electric heating type S-9026-J0 serial nr. 95E5517 Dual zone Heating Capacity Zone 1: 18 KW Heating Capacity Zone 2: 36 KW Total Heating Capacity: 54 KW Pump Motor (Zone 1): 1.5 KW / 2 HP Pump Motor (Zone 2): 1.5 KW / 2 HP complete with circulation pumps and high accurency temperature controlers 1" oil circulation pipes (up to 110 L/min) 1" vent pipes (up to 110 L/min)
Capacity: 4800 kg Lifting height: 3850 mm Free lift: 1590 mm Battery: 80 V, 805 Ah Operating time: 5 h Lateral valve adjustment weight: 4800 kg Tyres: 4 wheel, solid rubber Length: 3100 mm Width: 1500 mm Height: 2700 mm
Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.
Electric stroke cylinder RACO T1A61169, pressure 1000 daN, adjustment distance 400 mm
Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...
used
Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control
Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine ...
CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen
Manufacturer: Siemens Type: 1LA6 186-4AA71 22.0 kw
TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03
Key data: 6400 , 8000 , 11000
12.8 MW WARTSILA HFO fired power plant 18V32LN x 2, 6.52 MW / 11 KV / 60 Hz , Year 1998, Running hours : 27000 , may convert to 50 Hz if required. It is possible to covert as Dual Fuel generator ( Gas / Diesel or HFO )
Two three-phase motors 380-415 V - 50 Hz 0.9 KW - 2820 RPM Protection class IP 20 Never been in use
MEILLER TIGER LIFT Electric lifter 1000kg All data on photo. Machine was almost unused. New two batteriess and integrated charger.
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
Used Electric Motors – As-Is Condition | Fixed Price per Kilogram We offer a large and diverse batch of used electric motors, originating from various well-known manufacturers. These motors vary in size, power, and configuration, including standard IEC motors, specialized industrial motors, and customer-specific models. The full list includes over 150 units, all clearly labeled by type and model. These electric motors are sold strictly in their current condition (as-is). They have been visually inspected for identification and listing purposes and came of running installations. Key Notes: Condition: As-Is (used, untested, without warranty) Pricing: Offered at a competitive fixed price per kilogram (P/KG) Packaging: All motor packages are prepared by HOS BV Volume: Large, mixed batch of units; ideal for resellers, refurbishers, or parts recovery For a full list of motor typ ...
Electric tow tractor Manufacturer: MOVEXX Type: T 1000 The electric tow tractor can be used in numerous areas. Think about internal and external logistics; however, the machine can also be used to move containers in waste management. The TT1000-T can also move a variety of different types of trolleys, such as roll containers, industrial trolleys and aforementioned waste bins. Technical data pulling aid: 300W / 800 N Weight without battery: 40 kg Year of construction 2020 including battery charging station Maximum weight to pull: 1,000 kg Battery specifications: Lithium battery: LITHIUM LIFePO4 24V / 36 Ah / 922 Wh Year of Make: 2020 Weight: 11.9 kg Condition & accessories, see original pictures! If you have any questions, email or call.
Floor Polisher BGM 80 A Griddle Multifunctional use for frying, cooking and cooking food The multi-roaster is equipped with a special grill surface that allows all dishes to be prepared directly on the grill plate, such as fish, meat, vegetables, rice and pasta dishes, as well as potato dishes and desserts. Due to the larger capacity, it is also ideal for dishes with sauce, such as goulash. Dimensions: W x D x H 800 x 600 x 200 mm Equipment: 2 heating zones Dimensions grill surface: W x D 740 x 540 mm Connected load: 400 V/ 8.0 kW Fuse: 16 amps Weight. 40 kg Housing made entirely of CNS, Housing 170 mm Device feet 30 mm high Height adjustable up to max. 75 mm Steel plate, specially hardened hard chrome-plated Energy-saving technology Heating infinitely thermostatically adjustable Optimal thermal conductivity Large full-surface heat storage tank Warming ...
Electric frying plate with open base with 2 heating zones, 4.2 kW each Working temperature of each heating zone from 120 - 280°C thermostatically controllable Frying surface for fat drain inclined 1.5 ° forward 1.5 mm thick front and top plate made of CNS, side and back panels made of stainless steel Scotch-Brite micrograph, rounded edges on the reverse side IPX4 - splash-proof Standard with grease drip tray and 3-sided stainless steel splash guard with height-adjustable feet (+50 mm) Dimensions outside (W x D x H): 800 x 700 x 850 mm Plate dimensions (W x D): 730 x 540 mm Cabinet (W x D x H): 680 x 640 x 420 mm Weight: 80 kg More items - new and used - can be found in our shop! International shipping costs on request!
Used from plant disassembly. Siemens Simodrive Posmo-SI with Alpha gearbox Engine: 6SN2500-2BF00-0GG0 Transmission: TP 050-MF1-5 -071-000 Dimensions L x W): approx. 65 x 25 cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.
Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V
Hanselifter E-MES150-15-05 Electric Box Lifter Minilift 150kg 0.15 kW 2x12V Excellent maneuverability for tight spaces Electronic height change of the platform Operating terminal for easy handling when lifting and lowering Increased safety thanks to approx. one and a half metre supply cable and an integrated charger with overload protection Charging possible at any standard socket With parking brakes on both swivel castors Dimensions L x W x H: 870 x 600 x 1790 mm Drive type: semi-electric Overall height: 1790 mm Tyres: polyurethane Ground clearance: 70 mm Net weight: 66 kg Fork length: 475 mm Lifting speed: 50 mm/s Lifting height: 1500 mm Load center of gravity: 230 mm Platform height max.: 1500 mm Platform dimensions L x W mm: 475 x 600 mm Wheelbase: 680 mm Load capacity: 150 kg Turning radius: 850 mm You can find more box jacks - new and used - in our shop! ...
weight max. in kg: 2000 kg tool adaptor: Kugelkopf stroke height: 200 mm battery: 24 V / 240 Ah weight: Batterie: 204 kg weight of the machine ca.: 320 + 204 Kg dimensions of the machine ca.: 1,1 x 1,2 x 1,4 m • Charger, last UVV -check 01/2009, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical details Input voltage: 220 V Input frequency: 125 Hz Input current: 8 A Noise level: 65 dB Protection type (IP code): IP67 Power take-off speed (max.): 1,500 rpm (The electric motor has been used for retrofitting diesel-powered trucks to electric or hydrogen-powered ones. A hydraulic pump can also be added to it. A drawing of the electric motor with an attached pump is provided.) The Permanent Magnet Synchronous Motor (PMSM) is an AC electric motor that uses permanent magnets in the rotor instead of electromagnetic windings, resulting in high efficiency, power density, and a high torque-to-inertia ratio. These motors require complex, digitally controlled inverters for operation and are used in high-performance applications such as robotics, electric vehicles, and high-efficiency appliances like washing machines. Rotor: Unlike induction motors, the rotor is equ ...
Electric chain hoist, 125 kg DC-Pro1 125 1/1 H5 V8/2, Demag, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - Comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Electric chain hoist, 125 kg DC-Pro1 125 1/1 H5 V8/2, Demag, used – top condition - Load capacity 125 kg - Without pendant control - Includes 4 m power and compressed air cable Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For the ...
Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price
Electric motor ALMO MTA 132 SX2 recon Ball bearings renewed from the rotor. Seals renewed. The engine has slight traces of smoke but is in an overhauled and installable condition. Data from the engine see pictures.
Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - is in very good condition and fully functional,- We have verified the function with a test. Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used – top condition - Lifting height Chain length 3.25 m Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or al ...
Electric motor AEG IP 54 Year of construction 1991 Type AM180LC 22kW Price 250,00€ net
maximum number of results exceeded
please refine your search
239 € 
