electric furnace used for sale

A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.

Hardening furnace Lg.Nr. 26164 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 1200 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Interior dimensions approx. W 350 x H 250 x D 770 mm - Usable volume 41 L - Space requirement approx. W 950 x H 1370 x D 1600 mm - Weight approx. 400 kg

The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.

Melting and holding furnace StrikoWestofen MH II-T 6000/3500 G-eg, built in 2021, heating capacity 2,600 kW, capacity 6,000 kg, melting capacity 3,500 kg/h, max. melting pool temperature 760°C, max. furnace room temperature 1,050°C, height approx. 8,043 mm, with Striko K2000E feeder, built in 2021, with elevator for transport boxes

A microprocessor-controlled dental ceramic firing furnace is available. Firing temperature: 1200°C, firing chamber diameter: 85mm, firing chamber height: 67mm, machine dimensions X/Y/Z: approx. 280mm/430mm/410mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible.

Melting furnace ZPF Therm ST-G3 T 10 CHHTETWWK, built in 2012, loading weight 9,000 kg, with loading lift (No. ZPF Therm 2), plus processing platform, 2 slag storage tanks, preheating chamber for aluminium ZPF VWK5.2, built in 2012, heated by waste heat, with chimney

A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible.

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1100 Grad voltage: 230 V output: 3 kw range - high tensile: Innen 295x230x125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An electric Nabertherm shuttle kiln for firing ceramics, stoneware and soft-paste porcelain is offered. Connected load: 69kW, maximum temperature: 1340°C, volume: approx. 1000l, internal dimensions X/Y/Z: 800mm/1600mm/800mm, control system: Nabertherm C19 program controller. Equipped with automatic exhaust-air flap control, motorized ceiling flap and removable lifting eyes. Overall dimensions X/Y/Z: approx. 1300mm/2200mm/1840mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 250 °c width: . mm height: mm depth: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No.8505548 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating chamber dimensions: approx. 550 x 440 x 400 mm (400 mm depth) Temperature range: up to approx. 200°C Reference: Wup - Lot 6 Auction-ID: A7-49056-64

Machine number: 47537 Operating voltage: 220 V Frequency: 50 Hz Rated current: 14.5 A Connection: 3.2 kW Max. temperature: 1200 °C Internal dimensions: 450 x 300 x 300 mm Reference: STS - Lot 12 Auction-ID: A7-49056-253

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...

A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schutzgaserzeuger Ofenanlagen zum Homogenisieren von Aluminium Kammerofen zum Homogenisieren von Barren und Bolzen Aluminium Homogenisierungsöfen Kontinuierliche Homogenisierungsöfen Stoßofen, Einweichen, Tief- und Rollenherdofen für Aluminiumbarren und -knüppel konzipiert Nichteisen Schmelzmetall Ofenanlagen Schmelz- und Warmhaltegeräte Lösungsglüh-Ofensysteme Die wärmezubehandelnden Barren oder Bolzen werden unter Zuhilfenahme von Distanzstücken zu Chargen zusammengestellt und mittels Chargiersystem in den Ofen eingebracht. Die Erwärmung erfolgt durch intensive Heißluft- oder Rauchgasumwälzung mittels Ventilatoren, wodurch eine schnelle und gleichmäßige Erwärmung erzielt wird. Nach Ablauf der Homogenisierungszeit wird die Charge in eine Luftkühlkammer überführt, in der sie mit kalter Luft rasch abgekühlt wird. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofe ...

total power requirement: 38 kW degree: 500 Grad weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: 1150 ° muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mm total power requirement: 3 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,8 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme erfolgt bei Dünnband auf den Spulen und dickeren Bändern in Prismen ode ...

Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenhe ...

MARENO EVO10X ist ein Härteofen/Trockenofen für Präzision, hohe Genauigkeit und Zuverlässigkeit. Nutzraum: B350 x H600 x T600 mm. Technische Daten: Max. Temperatur 270 °C; installierte Leistung 16 kW; Anschluss 50 Hz 3x 400 V; Außenmaße L1000 x B800 x H1800 mm. Ermöglicht kontrollierte Wärmezyklen zur Erzielung enger Toleranzen; Einsatzbereiche: Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie, Werkzeugmaschinenbau. Technische Daten ohne Gewähr

DE NABERTHERM N 4000/60HAS ist ein Umluftofen für Wärmebehandlungen mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Nutzraum 1300×1000×2000 mm (4000 l), Ladegewicht max. 3000 kg. 400–600 °C (max. 600 °C); Ventilator 9000 m3/h; Heizleistung 60 kW; install. Leistung 70 kW; Anschluss 3×400 V 50 Hz; Außenmaße 3700×2700×3100 mm. Zubehör: Wasserabschreckbad 2500 l, Zustandsleuchte. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SAFED NIT 17 ist ein Härteofen hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit bei Wärmebehandlungen. Maximale Temperatur 1000 °C. Heizleistung 7 kW; Gesamtinstallierte Leistung 28 kW; Anschluss 50 Hz, 3x 380 V. Maschinengewicht ca. 600 kg; Abmessungen L×B×H 5800×1200×1800 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft- und Raumfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SOLO 221-15/25 ist ein Anlassofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Volumen 4,5 l; maximale Temperatur 650 °C, geeignet für Wärmebehandlungen kleiner bis mittlerer Werkstücke. Technische Daten: installierte Leistung 4 kW; Anschluss 50 Hz, 3x 400 Volt. Ermöglicht enge thermische Toleranzen und ist geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

BOREL 4.5 / 650 S ist ein Härteofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Maximale Temperatur: 650 °C; Volumen: 4.5 l. Anschluss: 50 Hz, 3x 400 Volt. Erzielt enge Toleranzen und eignet sich für Branchen wie Automotive, Luftfahrt, Werkzeugmaschinen, Medizintechnik und Uhrmacherei Technische Daten ohne Gewähr

SAFED 6SGR50/70 ist ein Härteofen, ausgelegt für präzise, hochgenaue und zuverlässige Härteprozesse. Maximale Temperatur: 650 °C. Anschluss: 50 Hz, 3x 400 Volt; Anschlussleistung: 3.5 kW. Entwickelt für konstante und reproduzierbare Wärmebehandlungen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

Key data: 1150 °C, 260 mm, 500 mm

Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine Type: Electric Chamber Furnace/Laboratory Furnace/Heat Treatment Furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideal for heat treatment processes, annealing, material testing, laboratory applications, and research and development tasks. Features: Robust industrial design Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratory, workshop, industry and research Solid German quality production Max. temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Areas of application: Heat treatment of metals Annealing and hardening Material tests Ceramic and laboratory applications Research and development Interior chamber dimensions: B260 H180 T500

Key data: 300 °C, 1000 mm, 800 mm

Technical data Manufacturer: Steel Type: 8220 Type: Industrial Furnace / Chamber Furnace Condition: Used Other technical data according to the nameplate Facilities Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working area Suitable for professional use Areas of application Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Interior chamber dimensions: B1000 H1000 T800

Key data: 250 °C, 700 mm, 700 mm

Manufacturer: David + Baader, Kandel Type: 10880.3 Machine Type: Industrial Furnace/Chamber Furnace/Heat Treatment Furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories and workshops and is ideal for heat treatment, drying or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Type: Electric chamber furnace Condition: Used Further technical data on request or according to the nameplate Features and benefits Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible areas of application Heat treatment of metal parts Annealing and tempering work Drying processes Laboratory and testing ...

Last maintenance in 2024 Auction-ID: A1-49186-58

Last maintenance in 2024 Auction-ID: A1-49183-57

Auction-ID: A1-49183-418

Walk-in industrial heating, drying and tempering furnace for thermal treatment and forming. Tempering and forming of Makrolon/PC, PET-G, GS and XT as well as paint drying. Depending on the application, different temperature, running time and energy parameters can be programmed by PLC. Technical data Manufacturer: Egger Apparatebau Plant type: Industrial drying/tempering oven / Convection oven Version: walkable Manufacturer of recirculating air/fan unit: HERING AG, Gunzenhausen Type of recirculating air unit: NERB 200 F4/S Year of manufacture of recirculation unit: 2007 Manufacturer no.: 30-700126 Air volume flow: 7,200 m³/h Total pressure: 400 Pa Fan speed: 2,840 rpm Max. temperature circulating air unit: 220 °C Shaft power: 0.75kw Electrical connection heating: 400 V Heating capacity: 70 kW Control/auxiliary voltage: 230 V Power Control/Auxiliary Cur ...

General Description Industrial vacuum heat-treatment furnace manufactured by MILCO , model VP 1350 . Horizontal front-loading furnace designed for controlled thermal processing of metal components under vacuum or process-gas atmosphere. The installation comprises the furnace chamber, vacuum pumping equipment, process piping and separate electrical control system. Technical Details Manufacturer: MILCO Model: VP 1350 Machine type: Vacuum heat-treatment furnace Year: 2016 Power supply: 380 V, 50 Hz Installed power: 120 kW Horizontal cylindrical vacuum chamber Large hinged front loading door with multiple locking clamps Internal heating / hot-zone assembly Internal material support / transport system Vacuum pumping system Leybold-Heraeus vacuum equipment Cooling and process-gas piping Nitrogen filling system Pressure instrumentation Separate electrical control cabinet T ...

Used TEL Alpha-8SE-E Vertical Gas Diffusion Furnace Manufacturer: TEL Tokyo Electron Model: Alpha-8SE-E Manufactured: 11.2000 Sr. No. M000000Y5670 No books or documentation. Pumps/Motor: 2 x Toshiba 3 phase induction motor. 480 Volts, 60 Hz. Auction-ID: A1-48529-39

Last maintenance in 2024 Auction-ID: A1-49186-127

Last maintenance in 2024 Auction-ID: A1-49186-125

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

Two dental furnaces are offered, one Zirkonzahn sintering furnace and one Nabertherm preheating furnace. 1) Zirkonzahn Keramikofen 1500 sintering furnace, Year of manufacture: 2006, with control unit, firing chamber volume: approx. 0.6l, maximum temperature: 1500°C, power: 1500W, furnace weight: approx. 75kg, furnace dimensions X/Y/Z: approx. 390mm/690mm/490mm. 2) Nabertherm preheating furnace in need of repair with P 320 controller, program memory: 9 programs, program steps: 16, chamber volume: 9l, maximum temperature: 1100°C, when the Nabertherm furnace is switched on, an ERROR message with an error code appears, the exact cause of the fault is unknown. An on-site inspection is possible.

x-travel: 800 mm y-travel: 900 mm z-travel: 620 mm b-axis: +/- 120 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 640 spindle taper: HSK 63 spindle turning speed - stepless: 15000 U/min tools in tool magazin: 64 total power requirement: 10/17 kW weight of the machine ca.: 21.5 t dimensions of the machine ca.: 3 x 4.5 x 3.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 °C

Manufacturer: Reinhardt Model: Titan 6700 Year: 2023 Condition: Used Stock number: 9482 Maximum temperature: 50-300 C Working Area: 6.7 m³

Offer 26187 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 900 ° - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door and floor - Motorized lifting door - T. max.ca. 120 min - Drive 400 V / 59 kW - Interior dimensions approx. W 1000 x H 550 x D 1900 mm - Usable volume approx. 950 L - Space requirement approx. W 2100 x H 2800 x D 2800 mm - Weight approx. 2900 kg

Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-135

Conveyor system in front of furnace L x W x H 10.8m x 1.1m x 0.86m, with scissor table Auction-ID: A1-49382-3

Conveyor system in front of furnace L x W x H 10.8m x 1.1m x 0.86m, gas output 530kw, without ant Auction-ID: A1-49382-2

Max Weishaupt steam oven with oil burner, in very good maintained condition Length= approx. 190cm Width= approx. 100cm Height= approx. 180cm Auction-ID: A1-49805-6

Thermal process plant with nitrogen and formic acid supply, incl. Leybold vacuum pump and control system. Year of manufacture 2011. Well-maintained external condition, but without documentation and without available password – therefore only tested to a limited extent. Power 10 kW; Load current 25 A; Feed-in 3/N~ 400/230 V 50 Hz; Breaking capacity 0.3 kA; Operating hours approx. 21,286 h Auction-ID: A7-49816-99