electric equipment used for sale

Electric motor, three-phase motor -Power: 3.0 kW -Speed speed: 955 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Recess: Ø 230 mm -External flange: Ø 300 mm -Protection rating: IP55 -Dimensions: 590/302/H295 mm -Weight: 67kg

2 identical diesel gensets available MWM TD602V16 AvK generator with 700 kVA Operating hours approx. 1200 per unit Incl.: Radiator Silencer Cabinets Technical documentation Disassembled and immediately available Subject to prior sale - errors possible Internal reference number: E-1159

Three-phase motor with 2 speeds, electric motor -Power: 5.5/6.6 kW -Speed: 1440/1728 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 440/300/H315 mm -Weight: 43 kg

Motor power: 565 kW AvK generator with 660 kVA, year of construction 2000 Diesel generator was used as an emergency generator, therefore only about 145 operating hours in test operation. Subject to prior sale - errors possible Internal reference number: E-1160

Electric motor Flender ATB-Loher ANGA-315LB-42P 142/172 kW -unused - Electric motor Loher Flender - Model: ANGA-315LB-42P - 142 / 172 kW - 1480 / 2980 / min - 50 Hz - 1.21 t

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Container generators with 2 CAT C32 units with 1000 kVA power each Generator: Stamford HCI634J2 Operating hours: Only 21 Cooling: Water Speed: 1500 rpm Voltage: 400/231 V, 50 Hz Tank: 4x 860 litres The generator was used in an emergency power system, the condition is excellent. The last test run took place in November 2022. Subject to prior sale - errors possible Internal reference number: E-1004-54

Three-phase motor, electric motor, sewing machine motor -comes from: a PFAFF sewing machine -Power: 0.25 kW -Speed: 1410 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 44 -Dimensions: 230/185/H140 mm -Weight: 6.5 kg

current capacity: max. 13 KW throat: 120 mm contact pressure capacity: max. 120 kp voltage: 400 V open-circuit voltage: 2,5 V welding power: max. 2 x 2mm Blech fuse protection -thermal: 16 A total power requirement: 13 kW weight of the machine ca.: 12 kg dimensions of the machine ca.: 0,5 x 0,1 x 0,2. m Manual spot welding machine with 2 sets of welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 x 20 mm -Construction: B14 -Protection class: IP54 -Dimensions: 210/125/H160 mm -Weight: 5 kg

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -with: fan -Dimensions: 585/250/H260mm -Weight: 29 kg

electric servomotor, electrical actuator for sale. 3 pieces available, 2x original packaging, 1x without

Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Construction: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

Electric motor, three-phase motor -Power: 9.2 kW -Speed: 1420 rpm -Shaft: Ø 38 x 139 mm -Construction: B5 -Flange: Ø 230 mm -Protection class: - -Dimensions: 640/330/H360 mm -Weight: 95 kg

Electric motor, three-phase motor -Manufacturer: ABM Baumuller, electric motor type 3.DF 63 o-4/2 -Power: 0.18 / 0.25 kW -Speed: 1390/2820 rpm -Shaft: Ø 11 x 22 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 205/160 / H130 mm -Weight: 4.8 kg

Sewing machine motor, lighting current motor, electric motor -Manufacturer: Quick, sewing machine motor type DM 0.5-4 -Power: 370 W -Speed: 1420 rpm -Voltage: 220/380 V 50/60 Hz -Transformer: Sewing light 25 W -Shaft: Ø 14 x 30 mm -Dimensions: 245/240/H280 mm -Weight: 12 kg

Three-phase motor, electric motor -Power: 4.6 kW -Speed: 2900 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 470/340/H300 mm -Weight: 57 kg

Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps -Berg: clamping technology chip motor type FSP 140 U -Shaft: M22 x 1.5 -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Electric motor, three-phase motor -Power: 0.35/0.5 kW -Speed: 660/1325 rpm -Shaft: Ø 24 x 50 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 330/199/H230 mm -Weight: 10.3 kg

Electric motor, three-phase motor -Power: 1.4 kW -Speed: 720/1440 rpm -Shaft: Ø 24 mm -Construction: B3 -Dimensions: 345/240/H180 mm -Weight: 24.2 kg

Electric motor, three-phase motor -Foot: damaged -Handover: as is -Power: 14 kW -Speed: 2890 rpm -Shaft: Ø 35 x 90 mm -Construction: B3 -Dimensions: 580/370/H390 mm -Weight: 104 kg

electric motor, three-phase motor -Power: 1.85/2.1/2.4 kW -Speed: 700/900/1435 rpm -Shaft: Ø 38 x 78 mm -Dimensions: 540/400/H400 mm -Weight: 92 kg

Key data: 2613 , 3194 , 6300

2613 KW KKK condensing steam turbine Twin AFA46 GT6 from 2004 in good condition, used for sale. Manafacture: KKK Model: AFA 46 GT6 Type: Steam Condensation Serial Number: 4.746.137 Power [KW]: 2.613 Pressure inlet [bar]: 29 Temperature inlet [°C] 360 Pressure outlet [bar]: -0.8 Year of construction: 2004 Weight [kg]: – Dimensions LxWxH [cm]: – More information here: stromerzeuger-discount.de/angebote/dampfturbinen/2610-kw-kkk-twin-afa4 6-gt6/

Three-phase motor, electric motor -Power: 0.66 kW -Speed: 1415 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 44 -Dimensions: 285/160/H205 mm -Weight: 12 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/290/H250 mm -Weight: 37 kg

Electric motor, three-phase motor -Lenze: GFT 100-2 (0.6 kW 800 rpm) -Power: 0.6 kW -Speed: 800 rpm -Lenze fan: S2E 170 (0.05 kW 2500 rpm) -Shaft: Ø x L 28 x 60mm -Construction: B3 -Dimensions: 710/260/H200 mm -Protection class: IP54 -Weight: 31.5 kg

Key data: 525 , 700 , 400

525 kW Tuthill Coppus condensing steam turbine RLHA24 from 1999 in good condition used for sale. Manufacturer: TUTHILL Coppus Model: RLHA 24 Type: Steam Condensation Serial Number: 99H5046 Performance mech. [kW]: 525 Pressure inlet [bar]: 16 Temperature inlet [°C] 350 Pressure outlet [bar]: 0,70 Year of construction: 1999 Weight [kg]: 5700 Dimensions LxWxH [cm]: - More information here: stromerzeuger-discount.de/angebote/dampfturbinen/tuthill-coppus-rlha24 /

Three-phase motor, electric motor -Drive motor of: a cylindrical grinding machine VEB SIP315x500 -Power: 1.5 kW -Speed: 935 rpm -Drive shaft: 28 x 60 mm -Design: B5 -Protection class: IP 44 -Dimensions: 360/250/H250 mm -Weight: 27 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 685 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 360/230/H250 mm -Weight: 36 kg

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1430 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Dimensions: 315/200/H240 mm -Weight: 16.2 kg

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 2880 rpm -Shaft: Ø 25 x 40 mm -Protection class: IP 44 -Dimensions: 410/225/170 mm -Weight: 24 kg

Three-phase motor, electric motor -Power: 1.4 kW -Speed: 1415 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Protection class: tropicalized -Dimensions: 340/265/H200 mm -Weight: 28 kg

Three-phase motor, electric motor -Voltage: 220/380 V -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14/30 mm -Construction: B5 -Dimensions: 310/195/H160 mm -Weight: 12 kg

Electric motor, three-phase motor -Power: 3.3 kW -Speed: 2865 rpm -Shaft: Ø 28 x 55 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 445/295/H250 mm -Weight: 31 kg

Electric motor, lighting current motor -Voltage: 220 volts -Power: 0.37 kW -Speed: 2860 rpm -Shaft: Ø 11 mm -Design: B5 -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 230/210/H195 mm -Weight: 7.4 kg/piece

Three-phase motor, electric motor -Power: 3.5 kW -Speed: 950 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 33 -Quantity: 1 available -Dimensions: 485/350/H280 mm -Weight: 42 kg

Three-phase motor, electric motor -Power: 1.5/2.5 kW -Speed: 1470/2935 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 44 -Dimensions: 500/250/H335 mm -Weight: 54 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1395 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 280/165/H205 mm -Weight: 13 kg

Fan, fan, electric motor blower -Fan electric motor: 1.1 kW -Speed: 2890 rpm -Voltage: 380 V -Protection class: IP 55 -Price: per piece -Number: 10 pieces -Dimensions: Ø 170/278 mm -Weight: 10 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Voltage: 380/660 V -Shaft: Ø 38/80 mm -Construction: B5 -Protection class: IP44 -Price: per piece -Number: 4 pieces -Dimensions: 520/286/H330 mm -Weight: 86 kg

Power: 900 kVA Cooling: Water with front-mounted cooler Speed: 1500 1/min Generator: Stamford HCI 634G1 Voltage: 400/231 V, 50 Hz Tank: approx. 1100 liters Subject to prior sale - errors possible Internal Reference Number: E-1004-65

Fan, fan, electric motor blower -Fan electric motor: 2000 W -Speed: 2850 rpm -Voltage: 380 V -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: Ø 160/325 mm -Weight: 17.2 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 690 rpm -Shaft: 2 x Ø 19/40 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: 314/213/H162 mm -Weight: 9.1 kg

electric motor, three-phase motor -Power: 1.1 kW -Voltage: 220/380 V -Speed: 2845 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Dimensions: 270/155/H235 mm -Weight: 10.3 kg

Three-phase motor, electric motor -Power: 2.2 kW -Voltage: 220/380 V -Speed: 915 rpm -Shaft: Ø 34/28 mm -Length shaft: 120/60 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 495/240/H275 mm -Weight: 28 kg

Three-phase motor, electric motor -Drive: 220/380V/0.18kW -Speed: 1370 rpm - Shaft journal 1: Ø 8x30 mm -Shaft journal 2 : Ø 10x15 mm -Type: B5 -Protection class: IP 54 - Quantity: 1 piece -Dimensions: 230/125/H155 mm -Weight: 4.7kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 930 rpm -Voltage: 220/380 V -Shaft diameter: 22 mm -Construction: B5 -Dimensions: 385/252/H275 mm -Weight: 25 kg

Three-phase motor with 2 speeds, electric motor -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1465 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP 33 -Number: 2x available -Price: per piece -Dimensions: 595/400/H315 mm -Weight: 109 kg

Three-phase motor with 2 speeds, electric motor -Power: 4/12 kW -Speed: 980/1470 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -pole-reversible -Protection class: IP 44 -Dimensions: 630/460/H320 mm -Weight: 129 kg