electric cutting used for sale

Load capacity 25,000 kg Lifting speed 0.8/3.2m/min Lifting height 4 m Strand count 2 Chain 23.5 x 66 mm Operation via hand remote control - conversion to radio possible Engine group 1Bm / m3 Electrical values 400 V / 3.1 / 12.5 KW Weight without carrier frame 780 kg Documentation available - good condition - little used - PRICE ON REQUEST!

Cooking Unit: Stainless Steel Berner with Induction Stove 269x70x70 cm for Pedestal Mounting Cooking block with left 2 sliding doors and 3 drawers each 30x50x10 cm, sliding door cabinet 121x60x36 cm, in the middle induction stove 4 plates, hob size 65×56 cm, with pot detection, 400 V, 14 kW, 20 A, direct connection, storage compartment at the bottom 71x70x33 cm additionally 2 sockets with 230 V, right 3 drawers each 30x50x10 cm, high-quality gastro fitting, for base mounting, feet optionally available, also freely available in the room, Original price approx. 18000,00 €

STILL electric forklift mod. R50/15 3-wheel – CE compliant – used with new V24 battery - Flow q.li 15 - Sideshift - Riser mm. 3500 - Battery with 1800H - Complete with charger - COMPLETE WITH MANUAL AND CE DECLARATION

MOTEUR Marque : Caterpillar Modèle : CG132-16 Puissance électrique nominale : 800 kW Année de fabrication : 09/2016 Carburant : Gaz (biogaz / gaz épuré) Fréquence : 50 Hz Tension : 400 V Heures de fonctionnement : 59 000 h Type d’application : Cogénération GÉNÉRATEUR Fabricant : Marelli Motori Modèle : MJB 450 MB4 B20 Puissance apparente : 1 250 kVA Tension : 400 V ±10 % Fréquence : 50 Hz Vitesse de rotation : 1 500 tr/min Année de fabrication : 07/2016

Induction motor SIEMENS 1SN 1634-4 HP 90-Z 1992, H-modul, all documents. Power: 2,500 kW (3,399.05 hp). Input current: 192 A Total weight: 9,900 kg Cooling Type: Water

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

table diameter: 600 mm table load: 250 Kg swivelling range: 0 - 135 Grad turning speeds: 0,03 - 2,0 U/min connected load frequency: 400 V weight: 0,4 t Dimensions (LxWxH): 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1 KW

The Bonfiglioli BN80B4 is a three-phase asynchronous motor with aluminum housing designed for a wide range of industrial applications. Core technical features Power: 0.75 kW (equivalent to approx. 1 HP). Speed: approx. 1400 rpm (at 50 Hz) or 1720 rpm (at 60 Hz). Number of poles: 4-pin. Voltage: 230/400V (50 Hz) or 265/460V (60 Hz) as standard. Rated current: approx. 1.85 A (at 400V). Degree of protection: IP55 (standard), optionally up to IP56 possible. Efficiency class: IE1.

AEG three-phase motor electric motor / 4 KW / 1410/1710 minProduct descriptionManufacturer: AEGType: AM 112 MZ 4Condition: used, baker's conditionDetails see pictures.

Big Ass Battery Test Unit The battery storage system has a capacity of 195kWh. It is about 2 years old with very few operating hours. The whole thing comes from a development/test environment and is ideal for energy storage projects, electric vehicles Charging technology, prototyping or parts Extraction. It has just been serviced by Big Ass Battery, including protocol and is therefore immediately ready for use.

3 Containers - Power Generators MTU 16V4000G63 Total power in parallel operation: 6750 kVA Single power: 2250 kVA Year: 2015, installed in container 2023 Operating hours: approx. 1600 / 1600 / 2600 Cooling: Water with radiator Speed: 1500 1/min Tank: approx. 4600 liters Voltage: 400/231 V, 50 Hz Switchgear: Control DEIF AGC4-MK2, also for parallel operation, circuit breaker 4000 A Subject to prior sale - errors possible! Internal reference number: E-1004-109

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor

8 Pieces Diesel Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

weight max. in kg: 1500 kg fork length: 1150 mm stroke height: 3000 mm high: 2090 mm weight of the machine ca.: 0,5 t dimensions: 1,69 x 0,78 x 2,09 m Pallet truck with - 24V/80Ah lithium-ion battery - charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine.

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 3200 mm high: 2060 mm weight of the machine ca.: 0,8 t dimensions: 1,95 x 0,86 x 2,06 m Pallet truck with inklude charger ve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 790 mm table load: 500 Kg swivelling range: 0 - 135 Grad turning speeds: max. 2,0 U/min connected load frequency: 400 V weight: 0,95 t Dimensions (LxWxH): 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1000 kg fork length: 1250 mm stroke height: 1600 mm high: 1940 mm weight of the machine ca.: 0,4 t dimensions: 1,69 x 0,78 x 2,09 m Pallet truck with - new 12-volt battery - charger - electric lift - manual drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.7-5.5 kW -Speed: 190-1500 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 22 -external fan -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Electric motor, three-phase motor -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 7,8 kg

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Electric motor, three-phase motor -Manufacturer: Perske, electric motor type NS80.10/8/2 -Power: 0.37/1.5 kW -Speed: 700/2900 rpm -Shaft: Ø 19 mm -V-belt pulley: Berges, symmetrical Ø 160 mm adjustable pulley see photo -Protection class: IP 54 -Design: B3 -Dimensions: 400/250/H200 mm -Weight: 40 kg

Three-phase motor, electric motor -Condition: unused -Manufacturer: Aerzen Weg, Electric motor type: 200L-02 -Power: 30 kW -Speed: 2970 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection rating: IP55 -Number: 3x motors available -Price: per piece -Dimensions: 770/400/H510 mm -Weight: 226 kg/unit

Three-phase motor with 2 speeds, electric motor -Power: 4/4 kW -Voltage/frequency: 220/380 V 50 Hz -Speed: 1460/2960 rpm -Voltage/frequency/power: 240/460 V 60 Hz 4.8 kW -Speed: 1760/3550 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/300/H330 mm -Weight: 71 kg

Sewing machine motor, lighting current motor, electric motor -Manufacturer: Pfaff, sewing machine motor type PCD 321 -Power: 0.245 kW -Speed: 2800 rpm -Voltage: 220/380 V 50 Hz -Shaft: conical Ø 11/15 x 21 mm -Sewing light connection: 12 V 15 W -Dimensions: 340/190/H320 mm -Weight: 19 kg

three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg

Three-phase motor with 2 speeds, electric motor -Handover in its current condition as inspected -Foot: damaged, see photo -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

Electric motor, three-phase motor -Electric motor for hydraulic pump and comes from a hydraulic press (ID18710) -Manufacturer: Schoen type UTE/B -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Anzahl: 1x available -Dimensions: 445/360/H300 mm -Weight: 62 kg

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, servo cylinder -Piston: Ø 32 mm -Stroke: 100 mm -Gliding guide -Stepper motor -Spindle pitch: 8 mm -Brake -Robotics cable -LECP6/LECA6, PNP, version with cutting data input -DIN- rail mounting -Dimensions: 630/320/H460 mm -Weight: 56 kg

three-phase motor, electric motor -Power: 4 kW -Speed: 2900 rpm -Shaft: Ø 28 x 60 mm -Recess: Ø180 mm -Bolt circle: Ø215 mm -Hole spacing lengthwise: 140 mm -Hole spacing across: 190 mm -Design: B5 -Protection class: IP 44 -Dimensions: 380/300/H250 mm -Weight: 33 kg

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 3.5-6 kW -Speed: 930-875 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 610/270/H340 mm -Weight: 91 kg

Electric motor, three-phase motor -Manufacturer: Siemens -Type: 1LA5166-1BJ40-Z IEC160L -Power: 2.1/3.1/9 kW -Speeds: 730/980/1460 rpm -Shaft: Ø 42 mm -Construction: B3B5 -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 640/355/H360 mm -Weight: 97 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot is broken in one place -Power: 3.5/14 kW -Speed: 730/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 620/390/H310 mm -Weight: 130 kg

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 28 kW -Rotation speed: - -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 900/480/H390 mm -Weight: 240 kg

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.55 - 33 kW -Speed: 30 - 2000 rpm -Shaft: Ø 45 mm -Construction: B3 -Protection class: IP 22 -External fan: 0.37 kW 2750 rpm 0.1 m³/sec -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Manufacturer motor Siemens type: OR8 9-2 -Manufacturer gearbox Siemens type: K460-2b -Motor power: 0.2 kW -Speed range: 90 rpm -Motor: adjustable -Construction: B5 -Drive shaft: Ø 20 mm -Price: per piece -Number: 4x available -Dimensions: 435/350/H300 mm -Weight: 33 kg

Electric motor, three-phase motor with 2 speeds -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 3/4 kW -Speed: 1420/2830 rpm -Shaft: Ø 30 mm -Wavelength: 75/185 mm -Construction: B3 -pole changing -Protection class: -Dimensions: 545/340/H270 mm -Weight: 50 kg