136,855 used machines on RESALE, but how to find them? Machine Search
Functional, used chamber filter press with motorized hydraulics and closed filtrate outlet.
Electric walking forklift, pedestrian stacker JUNGHEINRICH type EJC 14G-115-290ZTSerien. No. 80582366 year of construction 1997Nominal load capacity 1400 kgNominal lifting height 2900 mmFork length 1150 mmTotal length 2000 mmTotal width 850 mmOverall height 1900 mmOperating voltage 24 volt- Duplex mast without free lift- 5721 operating hours read- Battery from year of construction 2014, type 24 V 3PzS 345 (24Volt / 345 Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1050 kggood condition; used
electric motor, three-phase motor -Manufacturer: Bauknecht, electric motor type RF 1.5/2-72 P -Power: 3.0 kW -Speed: 2860 rpm -Shaft: Ø 19 x 40 mm -Design: B3/B5 -Protection rating: IP44 -Dimensions: 350/200/H2308 mm -Weight: 19.9 kg
electric motor, three-phase motor -Manufacturer: Wap, electric motor type AP 1112M-4 -Power: 4 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP 44 -Dimensions: 415/320/H225 mm -Weight: 51.8 kg
Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used
electric motor, three-phase motor -Manufacturer: Wap, electric motor type AP 100L-4 -Power: 3.7 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP 45 -Dimensions: 385/198/H240 mm -Weight: 32.1 kg
Equipped with battery charger, rear seat, lighting Auction-ID: A1-44050-34
Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,
ANTMAC BJS0507TL Electric Crawler Scissor Lift – 8m – 230kg – 2026 – 1 hour Specifications: Brand: ANTMAC Manufacturer: Shandong Ant Construction Machinery Co., Ltd. Model: BJS0507TL Serial Number: BJS20260115-B Year of construction: 01-2026 Hour reading: approx. 1 hour, read Version: electric self-propelled crawler scissor lift Maximum working height: 8,000 mm Platform height: approx. 6,000 mm Platform width: approx. 780 mm Platform capacity: 230 kg Travel speed: maximum 2.5 km/h Lifting time: approx. 36 sec. Descent time: approx. 37 sec. Electric drive: 24 V Batteries: 2x 12 V / 120 Ah Maximum inclination: X 1.5° and Y 2.5° Overall dimensions: approx. 2,080 x 920 x 2,140 mm (L x W x H) Own weight: approx. 1,310 kg Features: Rubber track undercarriage Integrated battery charger 220/230 V AC charging socket Charge status indicator Separate 220/ ...
Electric walker trucks, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EJE 116Masch. No: 90281103 year of construction 2007Nominal load capacity: 1600 kgLifting height: 200 mmFork length: 1150 mmOperating voltage: 24 VoltTotal length: 1750 mmTotal width: 730 mmHeight with drawbar: 1300 mm- Battery from year of construction 2013, type 24V 2PzS 250 (24 Volt, 250 AH)- Battery automatic charger- 5575 operating hours read. Weight approx. 560 kggood condition; used
Electric walking forklift, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EJE 22G-20-235-56 (L)Masch. No.: 80405795 year of construction 1996Nominal load capacity: 2200 kgLifting height: 200 mmFork length: 2350 mmOperating voltage: 24 VoltTotal length: 3050 mmTotal width: 690 mmHeight with drawbar: 1350 mm- Battery from year of construction 2007, Type 2 EPZS 230 (24 Volt, 230 AH)- Battery automatic charger- 8890 operating hours read. Weight approx. 560 kggood condition; used
Frame with control box and electric motor Auction-ID: A1-50251-460
E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 035884 Year of construction 2018Load capacity 240 kgHook travel 2 metersDistance suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used
Lifting height: 820 mm Auction-ID: A1-44050-234
Electric walking forklifts, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EME 112Masch. No: 90145339 year of construction 2005Nominal load capacity: 1200 kgLifting height: 200 mmFork length: 1170 mmOperating voltage: 24 voltsTotal length: 1550 mmTotal width: 700 mmHeight with drawbar: 1300 mm- 2 pieces traction batteries NEW from year of construction 2024, type 12 volts, Ah 55- integrated automatic charger, type E 230 G 24/6 (24 volts, 6 amps)Weight: approx. 175 kggood condition; used
Including Hoppecke battery charger, connection 32A-5 pole Auction-ID: A1-49889-113
Reading hours: 3678. Code: 1234 Auction-ID: A1-50348-3
E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used
Operation and completeness unknown. Auction-ID: A1-50348-119
weight max. in kg: ca. 1.000 kg fork length: ca. 1.140 mm stroke height: ca. 2.750 mm Jungheinrich HC 110 WP 10 M High lift pallet truck --------------------------------------------- Technical manufacturers description: Lifting height: approx. 2,750 mm Load capacity: approx. 1,000 kg Overall height: approx. 2,090 mm, Fork length: approx. 1,140 mm --------------------------------------------- (Technical data according to manufacturer - without guarantee!) All prices quoted are net plus VAT. Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
Pneumatic diverter, electric, as good as new
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse
including electric motor; without pallet box; Auction-ID: A1-44050-471
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
A total of explosion-proof 6 low-lift and high-lift trucks as well as 6 manual pallet trucks from the manufacturers Jungheinrich, Still, and Hawker are available.
Extra-long forks Auction-ID: A1-41951-118
maximum number of results exceeded
please refine your search
50 € 
