elb rotary used for sale

Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request.; good condition, working order

Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer; New

Automatic rotative machine for the moulding of car filters, air-oil, panel or circular, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of manufacture: Italy The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Specyfications: Available at 24 stations Turntable complete with 24 mould-holders Casting trolley with 2-axes Feeding machine for Polyurethane material Electronic control board to manage the functions of the machine Hourly output: from 200 to 350 pieces, according to the model of the machine, the utilized P.U. material and the mould -- Automatic rotary machine for forming car filters, air-oil filters, plate or round filters, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of origin: Italy  ...

Rotary vane vacuum pump Manufacturer: Leybold Type: Sogevac SV280 Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Automatic rotary traysealer from the manufacturer VC999, model TS900. It is a traysealer made in Switzerland, with rotary table in 4 positions. The machine is prepared to make up to 4 containers at the same time: only sealing, empty/sealing and vacuum/sealing/modified atmosphere. It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. VC999/TS900 has been designed to offer a compact solution (occupies just under 3m3) and allows, thanks to a high technological content, to meet high production needs (up to 2400 pieces / hour). The solidity and versatility of this model, together with an optimal value for money, have made the VC999/TS900 one of the most successful and highest quality machines on the world market. Built with first-class components, with exclusive noble materials (stainless steel and anodyne ...

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

Liquidation of ILPRA automatic traysealer of the FOODPACK series, model 500 v/g. It is a traysealer of Italian manufacture, with rotary table in 2 positions. The machine can perform 4 different packaging functions: sealing only, vacuum/sealing, vacuum/sealing/modified atmosphere (MAP). It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. Foodpack 500 has been designed to offer a compact solution (occupies just under 2 m / 2 ) and allows, thanks to a high technological content, to meet high production needs (up to 1440 pieces / hour) depending on the type of mold from 1 to 4 containers per cycle. The solidity and versatility of this model, together with an optimal value for money, have made the Foodpack 500 V/G one of the most successful machines. Built with first class components, with exclusive noble materia ...

Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price

Rated power up to 600 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (three-phase) Electrical fuse 16 A Laenge 2080 mm width 1030 mm He 1450 mm Juice pan in 1.4301 / AISI 304 Pressing force 24 to Press pressure 380 bar Juice yield up to 75% connection for juice drain 30mm High juice drain 400 mm Supplied scope of delivery 80x80cm, 20 pressing inserts made of acacia wood 50x50xcm ; New machine - best condition

Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition

Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use

FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0.0, Fibro, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. Technical data - SEW Eurodrive worm gear motor SA57 DR63M4/BR/TF, N=1320/35/min., i=38,23, 0,18KW, 230/400V, incl. brake 400V, - FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0, Fibro, - pitch 12, direction of rotation left u right, - All technical details see photos Attention: We also have the mechanically machined rotary table top made of aluminium D1800mm x 25mm thick, we are happy to offer this to you. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. ...

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: BEEK Rotary Punch DFC Die-cutting and creasing for digital printing incl. compressor - Approx. 15 punching plates available - No need for an experienced operator - Professional cutting and creasing results - Operating errors are virtually eliminated due to fixed cutting gap - Safe to use - Very quick set-up, maximum 3 minutes for the stamped part - Little waste, maximum 5 sheets - Long service life of punching plates - Low tooling costs - Printing mark Register Standard - Modular, adaptable design - Tool-free operation - Ergonomically arranged control panel - Solid construction - Maintenance-free On request, we can organize the following points for you: Packaging, loading, transp ...

Rotary vane vacuum pump Manufacturer: Becker Type: U5.100 Suction power: 100 m3/h end pressure: 0.1 mbar (abs.) Inclusive: Gasbalast, oil filter Status: Performance Performance: 12 months delivery time: from stock; ready for use

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Rotary valves Electrical power: 1, 5kW; ready for use

Little used and is very well maintained, factory No. 3791, in execution with degree - and indirect sharing using disc of part of. Table size 500 mm diameter Height 150 mm Length 710 mm 590 mm width (without drive) T - slot width 16 mm Gear ratio 1: 120 Weight 180 kg Accessories: Part of disc, operating instructions.

Rotary valves Electrical power: 78kW 0; ready for use

Buhler rotary discharge valve type MPS 22/13, reviewed, with ball bearings, partially with new bearings. Rectangular inlet 130/10, I/U 2, gap 0.05 (2 x), 0.10 (2 x), 0.15 (1 x), 0, 2 (1 x), d = 35. We have used rotary valves in all sizes and of many various types. Just ask! Our technicians will gladly advise you.

Rotary valves Inlet: 175 mm; ready for use

Rotary valves Electrical power: 78kW 0; ready for use

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0063F Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Drehschieber-vacuum pump Manufacturer: Leybold Type: Sogevacs SV280 Status: used, tested! The maintenance for the unit is sold separately! Including: oil filling Delivery time: In stock!; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: E2M28, E2M18 Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Becker Type: U5. 100 Suction power: 100 m ³/h Discharge pressure: 0.1 mbar (abs.) Including: Gasbalast, oil filter Status: Demo Warranty: 12 months Delivery time: In stock; ready for operation

Rotary vane vacuum pumps dry manufacturer: Becker type: VT 4.40 Condition: Rebuilt Voltage 400V DS suction capacity. 40 m³/h warranty: 12 months delivery time: in stock More pumps on request!; ready for operation

Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: KVT 3.100 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: RV 12, RV 3, RV 8 and RV 5 Motor: 230V Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0016C. Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 250 d Status: Demo Warranty: 12 months Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation

Rotary vane vacuum pump manufacturer: Becker Type: U4. 630 SA/K o F/K Vacuum: 3 mbar - 0.5 mbar Motor: 15KW status: used, tested! The General overhaul for the device will be sold separately! Including: oil, vacuum suction filter Delivery time: In stock!; ready for operation

DMN Westinghouse AL 200 rotary valve Discharge and dosing valve, type AL 200 stainless steel 1.4408 (ASIS 316) Volume 5.5 ltr. / U, SEW direct drive 24 RPM / 0.55 kW / 380 V

Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm -Groove: 12 mm -Dimensions: 320/400/H100 mm -Weight: 33 kg

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: small 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

1 piece Elster RVG G160 DN80 PN16 Rotary gas meters, used

Rotary vacuum pumps sliding & lubricated Number: 5 PCs Status: Rebuilt Warranty: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60 Hz 400V Motor power: 4KW Nominal: 160m ³/h Discharge pressure: 0,5hpa(mbar) Includes: user manual, parts list Delivery time: In stock; ready for operation

new all stainless steel turn table diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) adjustable speed 0,12 kW

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

Rotary vane compressor manufacturer: Becker Type: VT4. 25 Voltage: 400V/50 Hz Warranty: 12 months Status: Rebuilt and new painted Pressure capacity: 25 m ³/h Discharge pressure: Max + 1 bar (rel) Accessories: owner's manual; ready for operation

1 x type: S, size 8M, 30 kW 1 x without designation, 37 kW both are workshop inspected and ready for operation

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.

Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg

Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg