elb hahn kolb used for sale

ELB PERFEKT BD10 SPS surface grinding machine was built in 2004 in Germany by ELB-Schliff Werkzeugmaschinen GmbH. The machine is used for precision grinding of workpieces with a maximum weight of 1000 kg. The machining process is carried out fully automatically on a large magnetic plate or directly on the work table. The grinding head, consisting of a spindle and grinding wheel, moves along guide rails to ensure an even and accurate surface finish. The ELB SCHLIFF PERFEKT BD10 SPS magnetic surface grinding machine is also equipped with, among others, a cooling system with a belt paper filter, which cleans the coolant after machining and allows it to be reused in the next process. The total weight of the machine is 6300 kg. Technical specifications of the ELB PERFEKT BD10 SPS grinding machine - magnetic plate dimensions (L x W): 1000 x 750 mm - maximum grinding dimensions (L x W x H) ...

rotary table diameter: 600 mm grinding height: 600 mm grinding head - power requirement: kW workpiece weight: 300 kg grinding wheel diameter: 600 mm power spindle motor: 15 kW grinding height: 600 mm Control: SIEMENS STC weight of the machine ca.: 19 t dimensions of the machine ca.: 4,7 x 3,6 x 2,5 m Equipment & Accessories ? Wet grinding unit with universal paper belt filter, discharge container and magnetic separator, tank capacity approx. 500 l ? Electrical cabinet with digital drives SIMODRIVE 611D ? Coolant Mist extractor ? Recooling unit for grinding spindle motor ? Fully closed machine enclosure ? Central lubrication ? Swivebale Control Panel with SIEMENS Simatic 10” Touch HMI mounted at front of the machine ? Electro-permanent magnetic plate Ø 600 mm with 4mm pitch, absolute accuracy due to lack of heat, incl. Adhesion control (30-100%), autom. magnet pole switching via push b ...

Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible.

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/40 -Elbe Art.No.: 9.990.000.0354 -Flange Ø 90 mm -Bolt circle: Ø 75 x 8 mm -Quantity: 10x cardan shafts available -Price: per piece -Dimensions: Ø 90 x 400 mm -Weight: 5.1 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 330 mm -Weight: 2.7 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Surface grinding machine, used, Grinding area: 450x200x250mm, with magnetic plate, puller, holders, coolant device, ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

Machine : Grinding Wheel Flange Make : Grinding wheels and grinding wheels Type: Inner cone holder Pos. Text pcs. φ φ H- Schleifsφ Schl. B φ A 3 58 74 83 400 approx. 320 B ELB 4 50 62 60 127 30-50 170 C ELB 4 44 60 68 127 20-40 180 D 1 45 60 70 127 30-60 190 E 2 27 34 44 approx. 85 -30 130 F 1 45 60 75 127 -50 190 G 1 29 35 44 Ca.85 -30 146 H 1 45 60 75 Ca.135 -60 180 I 2 45 60 75 127 30-60 180/190 J 2 27 43 56 127 -40 175 K 3 32 32 55 127 20 158 S Grinding wheel : NEW – for a centerless cylindrical grinding machine, Dilvmit+Kircher D- 10C 100/8 hp V03 , 406x200x203mm ( 270x25x25) Price: € 200,-

grinding length: 1000 mm grinding width: 350 mm workpiece height: 450 mm total power requirement: 5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 375 mm workpiece height: 350-375 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELB ELB Super Rubin 020 VA II CNC surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth control Magnetic Table 600 x 300 mm Movements axis X/Y/Z: 650/300/250 mm 4th axis- rotational Grinding wheel: -Dia 300 mm -width 40-50 mm -bore size 76,2 mm Spindle speed 1400-2800 rpm Total power requirement 5,5 kW Weight of the machine ca. 3,4 t 4th axis devices: -Punch former PF350 V-block -Punch former PF650-ER20 -Punch former PFD-ER40 -Punch grinder PGAS- centreless Accessories: Collets Radius and angle dresser RDC Sinusoidal-table for devices SPF 50 Balancing rack for wheels LBS 14 surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth c ...

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

<br>Gathering machine Clamping element with manual installation 20 stations TO 803 20 Controls Wrong &amp; double sheet control Intermediate modules Installation element Hand system Adhesive Binder 20 pliers Vibration station Peace table Folding Anpre station S-FR and roughened station Popular B Hotmelt R ckenleimwerk Squeegee control Hotmelt side glue works Premelter Gauze station Scales cover feeder Groove Station 2 to 6 times Handling pressure Niederlegevorrichtung<br><br>Still in operation: No.<br>Available: immediately

Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Kolbe K 300 band saw, stand-alone-version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Built in 1998 Size max 460 x 310 x 60 mm min 125 x 100 x 3 mm Book block thickness max 60 mm min 3 mm Speed max 6.000 c/h Equipment gathering machine o 16 stations o gatherer ZU 801 o machine number gatherer 376 o -connected with perfect binder o 17 clamps o milling and roughening station o brushing station o hotmelt spine gluing unit o hotmelt side gluing unit o 2 premelters o stream cover feeder o cover scoring o cover pressing station o smooth lay down device o - option - not included o PURt spine gluing unit ; working condition

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment o infeed from the right side o automatic infeed with integrated pre stacker o cut counter o Equipment for sheet-fed o 1 set of clamping plates and holders o 3 sets of cutting sticks o 2 set of knives o external knife changing device o central lubrication o belt delivery

Ground meat portionning line Mado Category Used meat processing machines Subcategory Lines Type Lines Height 950 Width 1100 mm Length 2700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

Format: max 460 x 310 x 60 mm, min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Capacity: max 6,000 c/h Equipment: Gathering machine • 16 stations • TO 801 Controls • Incorrect and double-sheet control Intermediate building blocks • Set-up element • Manual system • Vibrating element • Criss-cross delivery -• coupled with Bookbinding • 21 pliers • Vibration station • Milling and roughening station • Hotmelt back glue unit • Hotmelt side gluing unit • Premelter • Gauze station • Shed transshipment feeder • Creasing station 2 to 6 times • Envelope pressing • Laying down device • Strap delivery • Cooling section • Cooling distance approx. 20m • inline with Three-knife trimmer • Conveyor belt to the three-knife trimmer • Kolbus HD 150 three-knife trimmer Optional accessories---not included--  ...

Built in 1997 Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6,000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 Controls • missing and double sheet control intermediate elements • Spiral Raceway • Hand Fed • Jogging element • Criss-Cross Delivery • -connected with Perfect Binder • 21 clamps • Jogging station • Milling and roughening station • Hotmelt Spine Gluing Unit • Hotmelt Side Gluing Unit • Premelter • Gauzing Station • Stream Cover Feeder • cover scoring 2 to 6 lines • Cover pressing station • Lay down device • Shingle Conveyor Delivery optional equipment:--not included-- • extending of the gathering machine • Opticontrol signature image reader • Conveyer system approx. 20 m • three knife trimmer Kolbus HD 150

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment