elb grinder used for sale

Height=1.27 m, Overall length= 1.3 m, Overall width= 0.7 m, Net weight= 277 kg,

Vertical grinder for the production of pearl barley, spelt and einkorn rice as well as for grinding lentils

Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg

Number of sanding units: 2 st. sanding width: 300 mm Sanding height max.: 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible.

Grinder Meissner -Type: AM 130 -Power: 13 kW -Throat diameter: 130 mm -Dimensions: 1250 x 1130 x 1300 mm -2 gears -With mixing arm -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Condition: Used in very good condition, ready to work, overhauled

Number of sanding units: 4 st. sanding width: max. 200 mm Sanding height max.: 7-150 mm Working speed: 8-16 m/min Band Speed: 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----------------------------------------------- Manufacturers Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----------------------------------------------- Price for the above-mentioned machine available upon request! ----------------------------------------------- Note: This machine was previously used in conjunction with a Weinig Variomat ...

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325x175x125 mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1.550 Kg

Height=1.33 m, Overall length= 1.28 m, Overall width= 0.8 m, Net weight= 418 kg,

Height=1.34 m, Overall length= 0.83 m, Overall width= 1.1 m, Net weight= 240 kg,

Height=1.45 m, Overall length= 0.9 m, Overall width= 0.75 m, Net weight= 229 kg,

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Lubrication (auto / manual): Manual, Control type ((cnc / manual): Manual, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): Variable with regulator, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Dressing (auto / manual): Automatic CNC the 2 grinding wheels, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 8, Infeed (auto / manual): Automatic, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 75 Kw, Power hydraulic motor: 3 Kw, Accessories included: Fairing, rule holder and plongeé, MARPOSS E50 meter, speed regulator. grinding wheel work, Total power: 90 Kw, Voltage: 220 / 380V, Lo ...

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 kg, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): Ø650xØ304.8x500 mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): 35 m / s, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/225 rpm, Dressing (auto / manual): Automatic CNC the two wheels, Diamond dressing speed: infinite 10/225 rpm, Lubrication (auto / manual): automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 6, Infeed (auto / manual): Automatic CNC, Regulating wheel dimensions (od x id x width): Ø355xØ203,2x500 mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Weight: 14,000 Kg machine + peripherals, Accessories included: Fairing, hydraulic work cap, hydraulic ruler / Machine casing, hydraulic cover of the grinding wheel, hydraulic workrest

Automatic wheel balancer, CNC gantry loader, electric hoist, cutting speed regulator, hydraulic lifting wheel grinder, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Speed ​​255 r.p.m., Diamond dressing speed: 255 r.p.m., Control type ((cnc / manual): CNC, Cnc brand: SIEMENS, Cnc model: 840D, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 14.000 kg, Accessories included: Automatic wheel balancer, CNC gantry loader, ...

Blanchard dia 900 mm Magnetic table dimensions: die 900 mm Motorpower: 25 HP Length : 3300 mm Depth: 1180 mm Height: 3100 mm Weight: 6 ton

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 1 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

GOODWAY GRW-4010 Traveling head Cylindrical grinder YOM 2018 About 600 working hours Control Mitsubishi M70 Distance between centers 1030 mm Max. swing over table Ø 420 mm Max. load between centers 750 kg Max. external grinding diameter Ø 400 mm Roundness 1.5 µm Machine positioning accuracy 2 µm WHEEL SPINDLE Swivel angle 0°~35° Wheel O.D. x width x I.D. Ø 610x Max.100x Ø 203 mm Wheel spindle travel 320 mm Min. setting unit 0.001 mm Max. rapid traverse speed 6 m/min. Grinding feed rate 0.001 - 6,000 mm/min. WORK TABLE Swivel angle -3° ~ +8° Max. rapid traverse speed 10 m/min. Min. setting unit 0.001 mm Grinding feed rate 0.001 - 8000 mm/min. WORK-PIECE SPINDLE Servo Spindle motor -Swivel angle Swivel angle +90° ~ -30° Center taper MT#5 TAILSTOCK Travel 35 mm Center taper MT#5 MOTOR Axes drive motor X-axis 3.5 kW Z-axis 4.5 kW Wheel spindle moto ...

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

KROMAS VM 200 Mass Grinding Machine -Capacity 200 liters - Motor power (kW): 1.1 kW -Inner diameter 980mm -Soundproof cover -Separation facility -Control / ON / OFF / SAVE / TIMER / Stepless speed regulation -Machine feet -Sliding Stones -Documentation Dimensions: LxWxH 1.5x1.5x1.6 meters / Weight 650Kg

serial number: 208892 control: Siemens 611 weight: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including trolley for removing breaking worm and trolley for screw, plates and knives, Hole plate diameter: 280 mm, Capacity: 5.5 - 8.5 t/h frozen blocks, Hopper: 600 litres, Power: 3 x 400V, 50Hz, 160kW, Dimensions: 3250 x 1650 x 2450 mm, Weight: 5000 kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 0.37 kW, Total power: 65 kW, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 15.000 kg, Accessories included: Intern feeder, automatic feeder with Allen Bradley PLC, MARPOSS process measurement equipment / Automatic feeder with Allen Bradley PLC, Team process measurement MARPOSS, internal workrest

A fully automatic Cleveland CNC cut-off and face grinding machine for carbide and HSS bars is available. Grinding spindle speed: 2000rpm, max. cut-off wheel diameter: 200mm, workpiece diameter range: 3mm-32mm, max. workpiece length: 500mm, length accuracy: +/-0.02mm, face runout accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 1900mm/1200mm/2400mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible.

Code: 0432 Brand: TOMMASI E BONETTI - ITALY Model: T O6 SA - CE Standard Column grinder with dust extractor for metalworking, workshops, laboratories, joinery workshops, structural steelworks, etc. - CE standard Three-phase motor Hp 1,5 2800 rpm Grinding wheel dimensions: 200 x 25 x 20 mm Extraction motor 0,5 Hp Overall dimensions mm 560 x 680 x 1000 h Weight kg 25

Surface Grinding Machine MAGERLE type F7 Travel X: 700 mm Travel Y: 280 mm Travel Z: 390 mm (without magnetic chuck) Magnetic chuck dimensions: 700 x 250 mm Grinding wheel: Ø 300 mm x Width 50 mm x Bore Ø 127 mm Spindle motor speed: 1850 RPM Auto feeds X - Y - Z Renovated electrical panel Diamond grinding Lubricant tank Voltage: 380 V Length with ends table: 2500 mm Width: 1800 mm Depth: 2200 mm Weight: approx. 3,5 T

A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible.

Frozen meat grinder Factory overhauled 2024

charge load: 620 Liter : 1.700 mm tank diameter / tank height: 1.550 / 600 mm : 450 mm motor capacity: 4,5 / 7,5 kW motor speeds:: 900 / 1.485 U/min voltage: 400 V total power requirement: 8,5 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,00 x 1,70 x 1,50 m Soundproofing cover bracket: 3,30 x 0,60 x 0,40 m Finishing machine - Serial-No.: 36225 / 05 - Machine ON: 6.469 h - Pneumatic separating flap - Timer - Pneumatic soundproof cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 620 liter Outer dia. of work tank: 1695 mm tank length (expanded): 3800 mm width of working tank: 430 mm speeds: 900 - 1485 U/min voltage: 400 V total connected load: 7,5 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With single mixer in the hopper and safety cover over head, Hole plate diameter: Enterprise, E52, 130mm, Capacity: max 2000 kg/h, Hopper: 120 litre, Power: 3 x 400V, 8.6kW, Dimensions: 1550 x 950 x 1500 mm, Weight: 560 kg

SCHAUDT KRONOS LX200115 - 100 mm650 mm (plunge grinding)130 mmup to 60/100 kW12 kWSiemens SINUMERIK24 V DC117 kW196 A1800 m3/hmax. width 660 mm, bore 304.8 mm63 m/s (up to 120 m/s with CBN)max. width 660 mm, bore 203.2 mm5 - 700 rpm, stepless400 V AC, 50 Hz, 3AC/N/PEapprox. 14,000 kg (incl. control cabinet)3210 x 1460 x 2000 mm (base machine, without control cabinet)

Number of sanding units: 8 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm B ROBA Fentech, Fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design  ...

Number of sanding units: 10 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design  ...

Operating voltage: 220/380 V Frequency: 50 Hz Connection: 500 W Grinding wheel diameter: 200 mm Width: 25 mm Auction-ID: A7-49089-408

Serial number: 0703039.001 Operating voltage: 230/400 V Connection: 0.9 kW Rated current: 3.6/2.1 Speed: 2900 rpm Grinding wheel dimensions: 200 x 32 x 51 mm Auction-ID: A7-49089-477

Machine number: 2881 Operating voltage: 230 V Grinding wheel diameter: 400 mm Table dimensions: 550 x 340 mm Auction-ID: A7-49089-515

A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible.

A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment.

A Höfler gear grinding machine is offered. Module range: 2-25, max. gear diameter: 1500mm, max. gear width: 720mm, min./max. generating grinding stroke: 60mm/750mm, ram stroke rate: 20-200double strokes/min, number of teeth: freely selectable, max. generating speed: 900mm/min, table diameter: 1000mm, distance between centers: 1250mm, min./max. grinding wheel diameter: 300mm/400mm, grinding wheel bore: 127mm, grinding wheel width: 45mm, weight: approx. 34t. Including paper band filter, counter support with steady rest and balancing unit. Documentation available. Inspection possible by prior arrangement.

TOS BDU 250A Internal and Face Grinder Machine Max. diameter of grinded hole: 250 mm Max. depth of grinding: 250 mm Max. workpiece diameter: 400 mm Max. swing: 470 mm Max. weight of workpiece: 100 kg Max. length of workpiece: 1000 mm Equipped with Face Attachment Total input: 9 kVA Machine weight : 3600 kg

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----------------------------------------------------- Manufacturers description: ----------------------------------------------------- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrate ...

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...

CONTROLS   electronic controls WORKING RANGE SURFACE GRINDING   grinding length: 600 mm   grinding width: 200 mm TABLE (SURFACE GRINDING)   magnetic table: yes MAGNETIC TABLE   length: 600 mm   width: 200 mm   weight: 100 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (max): 4200 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 250 mm   borehole: diameter: 51 mm   width: 25 mm ELECTRICAL SPECIFICATIONS   total power consumption: 7.5 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3000 mm   space requirements -front/back-: 2540 mm   total height: 1850 mm   total weight approx.: 2000 kg

CONTROLS   electronic controls WORKING RANGE SURFACE GRINDING   grinding length: 600 mm   grinding width: 350 mm   distance of axis of horizontal spindle - clamping surface (max.): 640 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1320 mm   table surface (front-back): 300 mm MAGNETIC TABLE   length: 600 mm   width: 300 mm SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1440 /min   spindle revolutions (max): 2880 /min   continuous speed variation: yes   drive power: 7.5 kW GRINDING TOOL   type of grinding tool: wheel   diameter (min): 300 mm   diameter (max): 450 mm   width: 80 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1900 mm   total height: 2000 mm   total weight approx.: 3450 kg ATTACHMENTS (GRINDING)   coolant unit: yes