elastic used for sale

Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor   

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 100-350 mm, Depth: 350mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 570 x 170 x 55 mm, weight approx.: 3 kg

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 250-450 mm, Depth: 200mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 365 x 160 x 70 mm, weight approx.: 5 kg

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range 250-450 mm, dp 1500 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 920 x 175 x 50 mm, weight approx.: 6 kg

Description: • CNC machining centre (3-axis) • Serial number AL5632 • Total installed power 20 KW • Working area approx. 2600 x 1150 mm • Panel passage height 180 mm • Travelling way X-axis: approx. 3000 mm, Y-axis: 1465 mm, Z-axis: 280 mm • Maximum travel speed in the axes direction x-y-z: 50-40-22.50 m/min • Tool magazine with 10 positions (some elastic nippers are broken) • Electro spindle SCM ISO-30-LD: power 6.60 KW, automatic tool change, for ISO 30 tool holder • Vertical milling group 6.60 KW-max. 12000 rpm, manual tool change • Saw unit to groove in X direction • Vertical drilling spindles in X-axis direction: 9 • Vertical drilling spindles in Y-axis direction: 7 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Automatic lubrication • Remote control panel • 8 consoles with 22 vacuum suction cups total • 4 lifting modules for heavy wo ...

Description: Manual available at this LINK Minimum working size 40 x 25 mm Maximum working size 200 x 105 mm Working length 200 - 3500 mm X1 Axis Stroke: 6120 mm X2 Axis Stroke: 6120 mm X3 Axis Stroke: 6200 mm X4 Axis Stroke: 6200 mm CU Axis Stroke: 1620 mm Y1 Axis Stroke: 4000 mm Y2 Axis Stroke: 4000 mm Y3 Axis Stroke: 4000 mm Z1 Axis Stroke: 440 mm Z2 Axis Stroke: 440 mm Z3 Axis Stroke: 620 mm V1 Axis Stroke: 1100 mm V2 Axis Stroke: 1100 mm1 W Axis Stroke: 230 mm A Axis Stroke: 180° C Axis Stroke: 360° SP1 Spindle Power: 14 kW SP2 Spindle Power: 14 kW SP3 Spindle Power: 12 kW Tool changer magazine with 62 positions Max tool diameter 200 mm Tool attachment HSK 63 Blade group power 2.2 kW Blade diameter 200 mm Total power 55 kilowatts SINUMERIK HMI control WARNING! Belts, elastic bands, and photocells of loading and transfer systems require maintenance. ...

:SS-27 | SS-31 | SS-35 turning diameter:700|790|890 mm turning length:700/1200/1700/2200/3200/4200/5200 mm control:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mm spindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/min speed steps work spindle:4-stufig (automatisch schaltend) cross feed:0,001~250 mm/min feed in z-axis:0,001~400 mm/min rapid travel - longitudinal/face:8/10 m/min dia of ball screw:45 mm in X-Achse / 60 mm in Z-Achse tool turret:10- oder 12-fach tool taper:VDI 40/50 oder Schaftaufnahme tool holder -shaft diameter:32x32 mm diameter tailstock quill:160 mm :200 mm tailstock quill taper MT:5 spindle drive:30/37 (37/45 opt.) kW servo motor X-axis:3,8 kw servo motor Z-axis:3,8 kw weight of the machine ca.:11t für Spitzenweite 700mm (weitere 500mm: 1,5t) t CNC controller:Siemens/Fanuc/Fagor steady rests:m ...

:SA-35 | SA-40 | SA-45 turning diameter:890|1020|1145 mm turning length:700/1200/1700/2200/3200/4200/5200 mm control:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mm spindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/min rapid travel - longitudinal/face:8/10 m/min cross feed:0,001~250 mm/min. feed in z-axis:0,001~400 mm/min dia of ball screw:50 mm in X-Achse / 80 mm in Z-Achse tool turret:10-/12-fach tool taper:VDI 40/50 oder Schaft tool holder -shaft diameter:32x32 mm diameter tailstock quill:235 mm :200 mm tailstock quill taper MT:6 spindle drive:37/45 (50/60 opt.) kW servo motor X-axis:4,5 (6 opt.) servo motor Z-axis:4,5 (6 opt.) kw weight of the machine ca.:16,5t für Spitzenweite 700mm (weitere 500mm: 2,2t) t CNC controller:Siemens/Fanuc/Fagor steady rests:manuell und hydraulisch Solid slant bed esures the  ...

number of spindles:8 spindle passage:67 mm Machine type: CNC controlled multi spindle automatic lathe Manufacturer: MORI SAY Type: TMZ 8/67 CNC Yob: 2018 Double four-spindle machine, eight-spindle machine with spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 collets equipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of: indexing speed of the spindles drum with bar feed at station 1 speed and orientation of each of 8 main spindles speed and position of each of 8 frontal slides speed and position of each of 7 compound slides speed and position of the cut-off slide at station 8 for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer. Machine equipped with the following optional items: BAR LOADER automatic bar feeder model PB 60 by CUCCHI BLT for bars  ...

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

working table size: 3000 mm x 1300 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 25 m³/h; pump capacity: 0,75 kW; noise level: 70 Db; heating system temperature: max. 60 °C; heating system: 4,5 kW; machine length: 3100 mm; machine width: 1450 mm ; machine height: 1650 mm; weight: 450 kg; The membrane presses of VP series are optimal solution for woodworking and a furniture production from all types of wood. The vacuum presses are equipped with heating system which allows reduce the time of drying glue and increase productivity of production. The heating temperature monitored and maintained automatically. The membrane presses of VP series can be used for small capacities but also for professional using. Construction The sturdy welded construction with a removable feet’s. Work table from 12mm HPL board.   Heating Heating system ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: BF 4 M 2011 Engine No.: on request Power: 36.4 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous with AVR Gene. No.: on request Generator power: 40 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 960 Height approx. mm: 1.430  ...

Execution: Aggregate type: mobile Execution: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine: 4 TNV 98 CT-IYE Engine No.: in production Power: 39.6 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2-N1 Gene. No.: in production Generator power: 45 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 1.710 Height approx. mm: 1.900 Length ap ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: BF 4 M 2011 C Engine No.: on request Power: 53.3 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous with AVR Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 270 Condition: New Year of construction: 2023 Delivery period: Instant Verl  ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: BF 4 M 2011 C Engine No.: in production Power: 53 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2Y1 Gene. No.: in production Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 1.150 Height approx. mm: 1.647 Length approx. mm: 2 ...

Execution: Aggregate type: stationary Execution: Super soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: BF 4 M 1013 EC Engine No.: on request Power: 93 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Sychron with AVR Gene. No.: on request Generator power: 100 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 270 Dimensions of the power unit: Width approx. mm: 1.080 Height approx. ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 731 GE Engine No.: 5312990071 Power: 153 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 J Gene. No.: 39796800001 Generator power: 150 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length ap ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: 5312982207 Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-M Gene. No.: 39664900008 Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length app ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 10 F Engine No.: in production Power: 524 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: A. van Kaick Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1 ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: in production Power: 576 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.850 Hei ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: BF 4 M 2011 C Engine No.: on request Power: 53 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 042 H Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Tank: Execution: Base frame tank with drip pan Content / liter: 85 Dimensions of the power unit: Width approx. mm: 1.150 Height approx. mm: 1.647 Length approx. mm: 2.540 ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Baudoin Engine: 12 M 33 G 1400 / 5 Engine No.: in production Power: 1,100 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: PI 734 B Gene. No.: in production Generator power: 2,000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 1000 Dimensions of the power unit: Width approx. mm: 2.460 Height appro ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: F 4 M 2011 Engine No.: miscellaneous Power: 27 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous Gene. No.: Miscellaneous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 960 Height approx. mm: 1.236 Length appro ...

Execution: Aggregate type: transportable Execution: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine: 4 TNV 98 CT-IYE Engine No.: in production Power: 39.6 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2-N1 Gene. No.: in production Generator power: 45 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Tank: Execution: Base frame tank with drip pan Content / liter: 100 Stock number: 1364 Condition: New Year of construction: 2023 Delivery period: Instant Verl Ho ...

Execution: Aggregate type: stationary Execution: Contianer 20 Ft. Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: in production Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: VALLEY 044 M M 6S/4 Gene. No.: in production Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 360 Dimensions of the power unit: Width approx. mm: 2.460 ...

Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding circular vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor -Manufacturer: WALTHER TROWAL, CM round vibrator with pneumatic container outlet -Total volume: liters -Type: CM series, unfortunately no exact type designation -Work container: elastically mounted -Work basin width: 230 mm -Work basin height: 370 mm -Individual components/dimensions: see photos -Machine for: deburring, polishing, rounding edges -Transport dimensions: 1330/1040/H1230 mm -Total weight: 509 kg

Rotary vibrator, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor -Manufacturer: circlon, round vibrator Trowal vibrator with soundproof hood -Total volume: 230 liters -Type: CLS-230 -Working container: elastically mounted -Working basin width: 250 mm -Outlet: approx. 200 x 260 mm -Working basin height: 510 mm -Equipment: manual separating flap, infinitely variable engine speed via variator gear, liquid connection -Machine for: deburring, polishing, rounding edges -Transport dimension: 1700/1600/H2240 mm -Total weight: 1150 kg

Cylindrical vibrator, tumbling facility, tumbling machine, mass finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood, small waste water system with spray device -Manufacturer: CETEMA, round vibrator type TM 500A -Working container: elastically mounted -Total volume: 500 liters -Outer diameter: 1450mm -Working basin width: 430 mm -Working basin height: 510 - 580 mm -Machine for: deburring, polishing, rounding edges -Dimensions machine: 1570/1430/H1140 mm -Dimensions of waste water system: 1010/520/510 mm -Total weight: 1450 kg

Cylindrical vibrator, tumbling facility, tumbling machine, mass finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Manufacturer: OSRO, rotary vibrator type OS10 -Working container: elastically mounted -Total volume: 600 liters -Outer diameter: 1430mm -Working basin width: 320 mm -Working basin height: 545 mm -Machine for: deburring, polishing, rounding edges -Dimensions: 1570/1430/H1140 mm -Total weight: 1140 kg

Cylindrical vibrator, tumbling facility, mass finishing machine, tumbling finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Working container: elastically mounted -Total volume: 60 liters -Outer diameter: 730mm -Working basin width: 250 mm -Working basin height: 250 mm -stretched container length: 1500 mm -Machine for: deburring, polishing, rounding edges -Dimensions: 800/800/H1150 mm -Weight: 460kg

feed pressure: 9,8 bar liter capacity: 17 l/s volume capacity: 1,02 m³/min total power requirement: 7,5 kW weight of the machine ca.: 0,352 t Atlas Copco screw compressor G 7 FF - 9.8 bar incl. 270 litre tank Fully automatic, internally fully piped and wired compact unit, single-stage, oil-injected compression, air-cooled, sound-insulated. Built-in refrigeration dryer. - Steel base frame for installation without foundations. Compressor and motor elastically mounted on base frame. - V-belt drive with mechanical tensioning device between motor and compressor element. - Sheet steel acoustic bonnet with large removable side panels. - Air intake filter with loading and unloading valve. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used filling monoblock for Oil and spirits Polaris model B6 speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits We summarize the main characteristics of our used filling monoblock and which make them UNIQUE on the market Elasticity of work that allows you to switch from one bottle format to another Acting with simple operations and without replacing parts of the machine this flexibility is also particularly suitable for those who carry out the third party Speed of the format change that can be carried out from 10 to 30 minutes at the most Given the reduced times the line can be easily used even for small production batches Use of any bottle format cylindrical square triangular amphorae flasks etc from 0 100 to 2lt in glass and PET We designed our labeling system in such a way as to guarantee the maximum laying precision on each type of bottle Lines B6 Can Be Composed  ...

Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding circular vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor, round trough vibrator -Manufacturer: Spaleck, round trough vibrator type SV 4 -Work container: elastically mounted -Work basin width: 350 mm -Outlet width: 440 mm -Work basin height: 500 mm -Fill weight: max. 640 kg -Equipment: Integrated separating device -Machine for: deburring, polishing, rounding edges -Transport dimensions: 1800/1550/H1220 mm -Total weight: 1080 kg

Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding circular vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor, round trough vibrator, round vibrator dryer -Manufacturer: Rotofinish Spaleck, dryer type ST11T from round vibrator system ST250TS -Work container: elastically mounted -Work basin width: 320 mm -Outlet width: 300 mm -Work basin height: 450 mm -Work basin: not rubberized -Equipment: Heating for granules -Accessories: granulate filling and tarpaulin incl. -Transport dimensions: 1430/1150/H1050 mm -Total weight: 482 kg

Vibratory feeder, vibratory feeder, vibratory feeder, feeder, automatic feeder hopper, spiral feeder -Handover: in current condition as seen -Condition/add-on parts: see photos -Manufacturer: Oku automatic, spiral conveyor vibration feeder with frequency control -Type: VZ 1000 SR -Frequency converter: Müller Kurtz MFS 168 -Work basin: Ø 670 mm -Outlet width: 300 mm -Work basin height: 245 mm -Shelve conveyor: elastically mounted -Connection: 230 volts -Transport dimensions: 1070/810/H730 mm -Total weight: 293 kg

T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote the production of collagen and significantly reduce the local volume of fat and elasticity of the skin. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness - Tightening of the skin - Reduction of cellulite - Reduction of fat deposits - Reduction of scope - Treatment after liposuction - Face lift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar and hexapolar radio frequency signal. Heat is generated by the contact of the RF (radio frequency) energy with the tissue impedance. With proper heating, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, an ...