ela used for sale

Sample punch for specimen DIN 527-2 mm. suitable for elastomers, paper, cardboard and foil. NEW.

Gross bar scale for filling open bags from 10 - 50 kg, with feed paddle screw incl. drive 1.1 kW for coarse and fine current dosing, with pneumatic sack clamp (200 mm) and automatic bag drop, mounted on an elastic stand frame. Last used for the filling of construction chemical products; good condition, last calibration in 2014.

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

New (secondhand) pumps Delivery: up to 31 m3/h. Head: up to 62 m. Power supply: three-phase 50 and 60 Hz. Power: 0.37 kW to 3 kW. Maximum operating pressure: 8 bar. Temperature of pumped liquid: -10°C to +85°C (CEA-CA) / -10°C to +110°C (CEA-V CA-V with elastomers in FPM). Insulation class: F. Protection: IP55. Pump body: Stainless steel. Impeller: Stainless steel. Diffuser: Stainless steel. Seal housing: Stainless steel. Adapter: Aluminium. Mechanical seal: Ceramic/Carbon/NBR. Fill and drain plugs: Stainless steel.

oven 650 1.0x1.0x5m bogie 6 zones PLC data monitoring Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermi ...

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Pester PEWO pack 250 compact HS and Therm 250 - Balcony construction with free access to the work area Film storage - Thorn bearing with pneumatically opening spring pressure brake Closing unit Closing unit -Closing beam driven by servo motor and crank drive Sealing unit - low-wear sealing system thanks to steel sealing beams with precise temperature monitoring Plant features: - Operating side on the right - Lauer PCS control panel (standard) - Standard cladding in acrylic glass - Machine design degree of protection IP54 - Control cabinet for pack Compact - Voltage 3x400V+N+PE, 50 Hz/60 Hz - Control Elau PacDrive MAX-4 - Traffic light display in three-colour standard version - Electric standard version - Pneumaticstandard version - Pluggable proximity switch IFM (standard) - Model PEWO-therm III 250 mounted in line - For thermal side shrinkage ...

Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...

1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder

Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts

Leaching plant Riehle Comjet 101 Riehle flaudering machine (leaching machine+loading system) Type: Comjet for products such as pretzel, lye roll, lye knots, lye squirrels. minimum personnel input with maximum production volume adjustable belt speed Bandwidth 57 cm Embroidered trolley fully automatic elaudment process Lye shower Built in 2000 Footswitch Stainless steel cladding with 2 stainless steel wagons including 18 cloth pullers each Optionally you can buy up to 30 cars with 18 cloth pullers each

GABO EPLEXOR® Bench Test Machine Here we offer you a GABO EPLEXOR® bench test machine. GABO EPLEXOR® 500 N Spectroscope 500 N / 1500 N static Dynamic Mechanical Analysis (DMA) EPLEXOR® Measurement of viscoelastic material properties in Dependence of temperature, frequency and mechanical stress EPLEXOR Series Test Systems® enable the mechanical characterization of a wide range of different materials: from elastomers and polymers, to Composites, metals, glasses, ceramic materials, Biomaterials and food, up to adhesives, plastic Masses and liquids. Areas of application are: DMTS/DMTA/DMA Analysis of viscoelastic material properties dynamic material testing dynamic fatigue testing Dynamic component testing Rheology The Method of Dynamic Mechanical Spectroscopy (DMTS/ DMTA or DMA) uses forced, mechanical vibrations for the deformation of the test specimens. The samp ...

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 100 ton Passage between uprights: 530 mm Max ram adjustment: 200 mm Distance between table -- ram: 250 mm Table area: 502 x 502 mm Ram area: 530 x 500 mm Length: 1600 mm Depth: 1200 mm Height: 2300 mm Weight: 2 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary m ...

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

MRI Esaote S-scan with HF cabin Magnetic resonance imaging Magnetic resonance imaging Magnetic resonance imaging MSK-MRI System Esaote S-scan Musculoskeletal MRI Magnetic Resonance Imaging Manufacturer: Esaote SpA Type: S-scan Date of acquisition: 06/2012 with standard patient table, magn. Probe unit + box, accessory cabinet incl. soundproofing cabin Manufacturer: Langenberg GmbH Custom-made with closed sheets, thus stronger attenuation 90 -110 dB (otherwise approx. 70 dB) Dimensions: approx. 442 x 327 x 240 cm (LWH) with lighting and 4 connections for air conditioning, with honeycomb filters Properties: - Maintenance-free, open permanent magnet, field strength 0.25 Tesla - stand-alone system with low space requirements (recommended room size 20 m²) - low power consumption - less than 3 kW (normal 230 V connection is sufficient) - ergonomic, swivel patient table ...

CEMIL TR550A quick miter saw with electronic movable stop, Working direction from left to right, consisting of: - motorized roller conveyor at the entrance, measures 4000x600 mm, with additional manual stop - fast lower miter saw model TR550A with: Double button cutting control blade D=550mm Engine HP 7,5 , volt 380 useful cutting capacity (HxW) mm 30x397 / 100x347 / 165x175 ELAP CM77 control for cutting programming (recently changed keyboard) - motorized roller conveyor at the outlet, length 5400mm, with: electronic stop, useful stroke 5150mm (4900mm with protection mounted at cutting side) .. transverse supports with wheels and automatic pneumatic ups / downs, for side discharge - frame with inclined supports with rollers for unloading cut pieces, measures about 4500x1500mm Total size about 10 x 2.5 meters. Machine according to CE standards

Plastic crusher, industrial shredder, cutting mills Wanner 20/20 E-SS for sale in very good condition. This slow-speed gear grinder is used next to an injection molding machine or in a separate room for grinding angles and middle parts. Due to the low speed, it is also suitable for grinding low-melting elastomers and sensitive engineering plastics. On the rotating rotor there are 6 knives. The crushing capacity of the grinder is approx. 60kg/h. The mill is equipped with a 4 kW engine.

The basic machine PEWO Pack 250 compact comprises the following assemblies: - Alarm and status display of the machine in plain text format - Servo technology - Product-adapted control of all servo axes, selectable via recipes on the HMI - Film monitoring, advance warning with visual and acoustic display as well as machine stop at the end of the film or film tear - Closing beam driven by servo motor and spa operation - Pneumatically controlled hold-down device at the outlet - Height adjustment of closing beam and hold-down device - Sealing unit - Low-wear sealing system due to Teflon-coated sealing bar with precise temperature monitoring - Cylinder monitoring with fault indication on the HMI - Protection class IP 54 - Product protection, closing area secured by means of a light barrier - Shutdown monitoring for the treadmill with automatic restart - Pitometer switch with pot ...

Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.

Ultrasonic cleaning system FiSA VST 2000/P, YOC 2014 - Ultrasonic power: 8.4 kW - Component weight max.: 5000 kg - Volume: 2000 l - Heating capacity: 51 kW - Internal useful dimensions L/W/H: 1600/ 1000/ 1250 mm - Space requirement (W x D x H): 12 x 3.2 x 2.1 m - Total power: 60 kW - Condition: very good details Mould cleaning for plastic injection moulding, extrusion, elastomere, die casting, core boxes, moulds; well-kept facility, was hardly in use

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

weight max. in kg: 2500 kg stroke: 3700 mm fork length: 900 mm : Super elastic battery: Baujahr 2013 construction height: 2630 mm weight of the machine ca.: t Duplex / Free lift The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Yale GLP55VX V2514 Counterbalance Truck VX Series Designed for medium and demanding applications The Yale Veracitor VX Series is a feature-rich series of internal combustion engine forklifts that combines the highest levels of productivity, ergonomics and reliability with a low (total) cost of ownership. The 40-55VX models are designed to provide customers with choices to meet different application needs. Available in three model configurations: the Base model offers low initial cost without compromising performance, the Value model offers high performance with very low operating costs, and the Productivity model guarantees superior performance in heavy-duty applications. Load-sensing hydraulics (LSH) increases productivity and reduces fuel consumption by up to 15% (VDI test); In the "ECO-eLo" fuel efficiency mode, fuel consumption can be reduced by up to 20% without signifi ...

Pester Pewo pack 250 compact The basic machine PEWO-pack 250 compact comprises the following assemblies (standard equipment): - Degree of protection : IP54 (ST) - Control cabinet : Swivel - Proximity Switch : Wenglor (ST) - Pneumatic version : Pneumatics (ST) - Traffic light indicator : Tricolor (ST) - Electrical version : Electrical standard S rev 15 - Frequency converter : Lenze (ST) - Product feed : straight in the middle Specifications: - Control unit HMI - Type : HMI 15" Pester Tangius (ST) - Control : Elau PacDrive - Voltage : 3x400V+N+PE, 50 Hz/60 Hz - Operating side : right - Protective cover : Acrylic glass (ST) - Paintwork : VA - Design (ST) - Packaging material - film : PE flat film - Documentation - Language : 2x French+1x CD - Documentation - Execution : Standard - Documentation - Supplier : 1x (ST) - Validation : Standard - Machine marking : F ...

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: ELAU PT1 Technical data Max. drill depth: 600 mm Drill capacity in steel: up to diameter: 18 mm Spindle stroke: 600 mm Table length: 1375 mm Table width: 700 mm rotatable: 360 ° Max. loading: 2000 kg Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 500 mm Spindle speeds: up to: 4000 rpm Spindle nose SK: 40 Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.3 kW Machine´s weight about: 2800 kg Overall dimensions machine: Length: 4500 mm Width: 1800 mm Height: 2700 mm Various accessories: Drill chuck with internal cooling Digital readout number of axis:: 2 Coolant system

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Thermal CTP Agfa Xcalibur E Year: 2004 in production with Transporttable Transfer table Processor Agfa Elantrix Workflow Apogee V.7.1 Price: on request

Rotating due to new motorization Removed this REINTJES transmission type WAV 1830 Reduction ratio 3.047:1 Year of construction 1987 Incl. Vulkan Elastic Coupling

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table + 2 watercooled tables max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Possible to program: - different temperatures - holding time of press under pressure - multiple cycles Capacity: 600 ton Passage between uprights: 1020 mm Stroke: 400 mm Distance between table -- ram: 400 mm Table: 1000 x 1000 mm Length: 1590 mm Depth: 1150 mm Height: 3700 mm Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

This is a rectangular pressure cooker FER250 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. The RRP for this device is €29,970 net. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal Technical de ...

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power : 3

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

This is a rectangular pressure cooker FER300 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Technical details: •Dimensions WxDxH: 1600x850x900 •Weig ...

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table + 2 watercooled tables max 220-240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Multiple cycles can be programmed Press with 2 pistons: Capacity lower piston: 750 ton (with digital readout for applied force) Capacity upper piston (counter pressure): 250 ton (with digital readout for applied force) Passage between uprights: 850 mm Distance between table -- ram: 500 mm Table: dia 800 mm Weight of press: 14 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse Height: 3700 mm Weight: 14 ton

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with 3 heated tables + 2 watercooled tables max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 150 ton Passage between uprights: 670 mm Max stroke: 600 mm Distance between table -- ram: 600 mm Table: 670 x 670 mm Length: 1120 mm Depth: 1200 mm Height: 3600 mm Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse Height: 3600 mm

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

Description Rotex splined elastic coupling GS 28/38 KTR from disassembly

The machine checks filled and sealed capsules with the help of an X-ray unit. It can be connected behind any capsule filling machine. System incl. format set capsule size 3. Binding triclamp for suction CRANES, filter unit AFC. Control ELAU. Capacity: up to 220,000 capsules/h The system is as good as new (unused). The machine inspects filled and sealed capsules with the help of an X-ray unit. It can be connected behind any capsule filling machine.Machine is equipped with format set capsule size 3.Connection triclamp for extraction KRANEN, filter unit AFC. PLC ELAU. Output: up to 220,000 capsules/hour. The machine is as new (unused).

Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, but rough running, should therefore possibly be subjected to a bearing change Timer switches off the machine after the set time has elapsed otherwise good condition, should still be thoroughly cleaned before use Video about test run available

Was used for filling and packing flour, format: 1000/ 2000g, backset: 105x65mm, max. output: 1/ 2kg packages: 60/ 50/ min, controls: ELAU MC4, with 3x servo main dosing unit, check weigher and servo post doser.

Max. load: 5t, lifting height: 4100mm, installation height: 2971mm, free stroke: 150mm, tires: Super Elastik solid rubber 300-15, Super Elastik solid rubber 250-15, operating hours: 15,200h, with overhead guard SDFHT full cab, heating and air conditioning, double auxiliary hydraulics and pallet clamp Meyer, an on-site inspection is possible.