used EISELE vms

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

Semi-automatic Hydraulic Metal Circular Saw Make EISELE Type VMS IV-440 HyYear of construction 1982Saw blade diameter: 400 mmCutting area flat profiles straight: 240 x 95 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 Miter: 180 x 75 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 straight: 150 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 round: 150 mmMiter cuts left / right: 45/30 °Saw blade speeds: 12.5 / 25 rpm.Pre-adjustable without steps: automaticallyVoltage: 380VDrive power: 2.6 / 3.2 kWWeight: 670 kgWith- hydr. Action vice- hydr. stop plate- Coolant device- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS IFabr -No: 9000150Saw blade diameter up to: 275 mmCutting area 90 ° round: 90 mmxa0xa0xa0 flat: 75 x 120 mmxa0xa0xa0 45 ° round: 90 mmxa0xa0xa0 Profiles: 75 x 80 mm2 saw blade speeds due to pole-changing motor: 40/80 rpm.Drive motor: 380 V, 1.4 / 1.9 kWDimensions L x W x H: 600 x 600 x 1500 mmWeight approx: 170 kgWith- Underframe- Coolant pumpused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS I PV 410Machine -No: 0005, built in 1980Saw blade diameter max .: 275 mmCutting area 90 °: 120 x 75 mmCutting area 45 °: 80 x 75 mmCutting area pipes: 90 mm2 saw blade speeds: 40/80 rpm.Drive power: 1.0 / 1.2 kWDimensions: 800 x 600 x 1400 mmWeight: 290 kgWith- stationary base- Cooling device- pneumatic saw blade feed- pneumatic viseused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS IIMachine -No: 24968 Year 1973Saw blade diameter: 300 mmCutting area flat: 160 x 80 mmflat 45 °: 120 x 80 mmAngle iron 90 and 45 °: 80 x 80 mmU-iron 90 °: NP 16U-iron 45 °: NP 12Tubes 90 + 45 °: 100 mmDouble-T 90 °: 160 x 74 mmDouble-T 45 °: 120 x 58 mmSolid material: 100/75 mmSaw blade speeds: 20/40 rpm.Drive power: 1.4 / 1.9 kWDimensions: 750 x 900 x 1650 mmWeight approx: 300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw semi-automatic make EISELE type VMS II PVMachine -No: 3906 Year 1972Saw blade diameter: 300 mmCutting area flat: 160 x 80 mmflat 45 °: 120 x 80 mmAngle iron 90 and 45 °: 80 x 80 mmU-iron 90 °: NP 16U-iron 45 °: NP 12Tubes 90 + 45 °: 100 mmDouble-T 90 °: 160 x 74 mmDouble-T 45 °: 120 x 58 mmSolid material: 100/75 mm2 saw blade speeds: 20/40 rpm.Drive power: 1.4 / 1.9 kWDimensions: 750 x 900 x 1650 mmWeight approx. 300 kgWith- stepless saw blade feed- pneumatic vice- Cooling deviceused, from one operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS II / 033Machine -No: 31902 Year 1976Saw blade diameter: 275 mmCutting area flat: 140 x 70 mmMiter cutting area: 100 x 70 mmPipes: 3 U-iron: NP 14 / NP 10Solid material: 80/60 mmSquare material: 50 x 50 mm2 saw blade speeds: 40/80 rpmDrive power: 1.9 kWOuter dimensions approx: 800 x 700 x 1500 mmWeight approx: 268 kgWith- pneum. vice- Underframe- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Circular Sawing Machine Make EISELE Type VMS / 041Machine -No: S76383 Year 1976Saw blade diameter up to: 275 mmhere cutting area at 90 ° round: 90 mmxa0xa0xa0 Flat profile: 75 x 120 mmxa0xa0xa0 in miter at 45 ° round: 90 mmxa0xa0xa0 Profiles: 75 x 80 mm2 saw blade speeds due to pole-changing motor: 40/80 rpmDrive motor: 380 V, 1.4 / 1.9 kWDimensions: 600 x 600 x 1500 mmWeight approx: 170 kgWith- pneum. vice- mobile undercarriage- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used

Key data: 300 mm

From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts

IRON SAW Cutting diameter: 100 mm Blade dimensions: 280 mm Speed range: 10, 20, 40, 80 RPM Cutting range 90 ° flat: 120 x 100 mm Cutting range 90 ° round: 100 mm Length stop: 500 mm Semi automatic electric fence Automatic sawing cycle Pneumatic clamping prepared for pneumatic feeder Total power: 1.5 kW Machine weight: 700 kg Condition: good Accessories: 18 blades, roller conveyor 2 m

Metal circular saw cold circular saw Eisele VMSII Metal circular saw Eisele, partially newly laced, incomplete as spare parts carrier or for completion. The machine was partially dismantled for overhaul and partially re-laced. The electric motor and the gearbox work, machine table and vice are in order. Coolant tub, base. The lever for the feed movement, the associated rack, the electric switch, the saw blade, the clamping nut for the saw blade etc. is missing. The saw can be minbecauseed in the miter. Sale as spare parts carrier!

saw blade diameter: 500 mm cutting diameter: 180 mm stroke: 0 mm total power requirement: 3,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Rotational speed: 7-70/min, voltage: 400V.

saw blade diameter: 450/500 mm cutting diameter: mm stroke: mm total power requirement: 3,6 kW weight of the machine ca.: 1130 t dimensions of the machine ca.: m - Circular saw - semiautomatic - hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6,0 - 8,0 bar total power requirement: 1,4 / 1,9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - Pneumatic quick clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously dimensioned gears - with Eisele rotation compensation for a long saw blade service life - Co ...

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Key data: 350 mm

Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Coolant lubrication

Description: Saw blade diameter: 275 mm Cutting diameter: 90 mm Stroke: 120 mm Mitre cuts (on both sides): 90 - 30 ° Speed range: 40 / 80 rpm Operating voltage: 380 V Total power requirement: 1.4 kW weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,300 mm